100+ Free WBBSE Madhyamik Power (Vocational) Practice Questions

Prepare for the West Bengal Board Class 10 Secondary Vocational Power Examination exam with instant access — no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately

100+ Questions

100% Free

Loading practice questions...

Same family resources

Explore More West Bengal Madhyamik Vocational Subjects (WBBSE)

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

2026 Statistics

Key Facts: WBBSE Madhyamik Power (Vocational) Exam

Master Class 10 WBBSE Vocational Power with 100 structured practice MCQs covering electrician tools, circuit fundamentals, house wiring, distribution boards, and earthing systems. Note: This practice question bank is an English-language MCQ study adaptation.

Sample WBBSE Madhyamik Power (Vocational) Practice Questions

Try these sample questions to test your WBBSE Madhyamik Power (Vocational) exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1Which electrical hand tool is specifically designed for gripping, twisting, bending, and cutting electrical wires in Assistant Electrician work?

A.Combination Pliers

B.Pipe Wrench

C.Ball-Peen Hammer

D.Cold Chisel

Explanation: Combination pliers feature serrated jaws for gripping and twisting conductors alongside hardened side blades for wire cutting. They are the essential multipurpose hand tool for electricians working on low-voltage installations.

2What is the primary standard dielectric insulation rating required for insulated handles of electrician's hand tools used on live low-voltage circuits?

A.100 V AC

B.1000 V AC

C.50 V DC

D.10,000 V AC

Explanation: According to international standards like VDE and IEC 60900, electrician hand tools intended for low-voltage work are tested and rated for safe operation up to 1000 V AC (or 1500 V DC). This ensures protection against electrical shock during live circuit maintenance.

3Which type of fire extinguisher must be used to suppress fires involving live electrical equipment?

A.Water Extinguisher

B.Foam Extinguisher

C.Carbon Dioxide (CO2) or Dry Chemical Powder Extinguisher

D.Wet Chemical Extinguisher

Explanation: Carbon dioxide (CO2) and dry chemical powder extinguishers are non-conductive agents suitable for Class C (electrical) fires. They extinguish the flames without conducting electricity back to the operator or damaging sensitive electrical components.

4Which basic testing tool uses a neon glow lamp inside a transparent insulated handle to check for live phase presence in 230V domestic sockets?

A.Neon Voltage Tester (Phase Tester)

B.Hydrometer

C.Earth Resistance Tester

D.Tachometer

Explanation: A neon voltage tester (commonly called a phase tester) contains a high-value current-limiting resistor and a neon lamp. When the metal tip touches a live phase terminal while the user touches the top metal cap, a minute non-hazardous leakage current illuminates the neon lamp.

5Which Personal Protective Equipment (PPE) item is mandatory for an electrician when drilling brick walls or cutting metal conduits?

A.Safety Goggles / Eye Shield

B.Ear Defenders

C.Leather Apron

D.Cotton Gloves

Explanation: Safety goggles or eye shields protect the operator's eyes from flying masonry dust, concrete chips, and metallic burrs produced during drilling and conduit cutting.

6What is the primary purpose of applying a Lockout/Tagout (LOTO) procedure during electrical installation maintenance?

A.To increase the supply voltage to connected loads

B.To prevent accidental re-energization of the circuit while technicians are working

C.To speed up the charging rate of standby batteries

D.To measure circuit insulation resistance automatically

Explanation: Lockout/Tagout (LOTO) physically locks isolating switches in the OFF position and attaches warning tags. This safety protocol prevents unauthorized or accidental restoration of electrical power while workers are performing maintenance.

7Why must an adjustable wire stripper be correctly set using its stop-screw before stripping PVC insulation from stranded copper wire?

A.To solder the copper strands together automatically

B.To prevent nicking or cutting individual inner copper strands

C.To increase the overall cross-sectional area of the conductor

D.To apply heat shrink tubing onto the wire end

Explanation: Setting the adjustment stop-screw ensures the stripping blades cut only through the outer PVC insulation layer without scoring, nicking, or severing the underlying copper strands, preserving the wire's full current-carrying capacity.

8What is the mandatory sequence of actions an electrician must follow before performing work on an existing electrical distribution panel?

A.De-energize, isolate, lock/tag out, and verify zero voltage with a calibrated meter

B.Open the panel cover, touch the busbars with insulated pliers, and turn on the main switch

C.Wash the busbars with water, apply tape, and re-close the switch

D.Increase the load on the circuit, measure current, and begin wiring

Explanation: Safe electrical work practices require isolating the power supply, placing lockout/tagout devices on the switch handle, and testing all phase and neutral busbars with a verified voltage indicator to confirm the system is completely de-energized.

9If a technician touches a live conductor and experiences an electric shock, what is the immediate first step an observer should take?

A.Grab the victim with bare hands to pull them away immediately

B.Switch off the main power supply or separate the victim using a clean dry non-conductive object

C.Pour water on the contact point to cool the victim

D.Throw a metal chain over the conductor to short it out

Explanation: The observer must immediately cut off power at the main switch. If the switch is out of reach, a dry non-conducting object (such as a wooden pole or rubber rod) must be used to push the victim away from the live source to prevent becoming a second victim.

10Why are high-voltage rubber insulating mats placed on the floor in front of main switchboards and distribution panels?

A.To provide a comfortable cushioned surface for operators

B.To provide high electrical resistance path between the operator's feet and the earth floor

C.To absorb transformer oil spills from leaking tanks

D.To prevent static charge accumulation on brass terminals

Explanation: Rubber insulating mats (conforming to IS 15652) provide high dielectric strength between the worker's body and the grounded floor. In the event of accidental live contact, the mat prevents dangerous fault current from flowing through the worker to ground.

About the WBBSE Madhyamik Power (Vocational) Exam

The WBBSE Madhyamik Vocational Power syllabus equips Class 10 students with foundational skills in electrical installation and power distribution. Key domains include selection and safe use of electrician hand tools (combination pliers, wire strippers, screw drivers, neon testers), workplace safety, PPE and lock-out/tag-out (LOTO), electrical circuit principles (Ohm's Law, Kirchhoff's Laws, series/parallel connections, power/energy formulas), conduit installation (PVC/metallic conduits, chasing masonry), cable preparation and jointing, low-voltage domestic house wiring, assembly and connection of distribution boards, MCBs, ELCBs/RCCBs, temporary site lighting installations, pipe and plate earthing systems, and basic electrical equipment maintenance. Note: This practice question bank is an English-language MCQ study adaptation for the WBBSE Madhyamik Vocational Power examination.

Assessment

Madhyamik vocational subject - Power: 1-hour-45-minute theory paper in the Optional Elective sitting, with practical/skill assessment conducted by the Sector Skill Council or the school concerned.

Time Limit

Theory 1 hour 45 minutes; practical/skill assessment conducted by the Sector Skill Council or the school concerned

Passing Score

WBBSE reports each subject on a seven-point grade scale: AA 90-100, A+ 80-89, A 60-79, B+ 45-59, B 35-44, C 25-34 (marginal pass) and D below 25 (disqualified). Grade C is therefore the minimum subject grade and a D in any compulsory subject makes the overall result unsuccessful.

Exam Fee

WBBSE does not publish a single per-candidate examination fee with the Madhyamik routine. Enrolment is made by the school online through wbbsedata.com within the Board's registration window, and the amount payable is set by the Board's enrolment circular for that session. Confirm the current figure with your school or the Board's notification rather than relying on a quoted estimate. (West Bengal State Council of Technical & Vocational Education and Skill Development (WBSCT&VE&SD) in collaboration with WBBSE)

WBBSE Madhyamik Power (Vocational) Exam Content Outline

20%

Electrical Hand Tools, PPE & Workplace Safety

Identification, specifications, and safe operation of electrician hand tools; Personal Protective Equipment (safety helmet, insulated gloves, safety boots); electrical shock treatment, CPR, and fire safety.

20%

Electrical Fundamentals, Ohm's Law & Circuit Analysis

Voltage, current, resistance, power, and energy definitions; Ohm's Law, Kirchhoff's Current and Voltage Laws; series, parallel, and combination circuit calculations; AC/DC fundamentals and power factor.

20%

Conduit Laying, Cable Jointing & House Wiring

Types of electrical conduits (rigid PVC, flexible, metallic); conduit bending and wall chasing techniques; conductor jointing (rat-tail, married, Western Union); single-phase domestic wiring schematics and staircase wiring.

20%

Distribution Boards, Panels & Temporary Lighting Systems

Selection, sizing, and installation of main switches, Miniature Circuit Breakers (MCBs), Residual Current Circuit Breakers (RCCBs/ELCBs); temporary panel assembly and construction site lighting setups.

20%

Earthing Systems, Protection & Preventive Maintenance

Purpose of electrical earthing, earth electrode resistance, pipe earthing and plate earthing installation procedure; testing earth continuity, insulation resistance measurement using Megger, and fault troubleshooting.

How to Pass the WBBSE Madhyamik Power (Vocational) Exam

What You Need to Know

Passing score: WBBSE reports each subject on a seven-point grade scale: AA 90-100, A+ 80-89, A 60-79, B+ 45-59, B 35-44, C 25-34 (marginal pass) and D below 25 (disqualified). Grade C is therefore the minimum subject grade and a D in any compulsory subject makes the overall result unsuccessful.
Assessment: Madhyamik vocational subject - Power: 1-hour-45-minute theory paper in the Optional Elective sitting, with practical/skill assessment conducted by the Sector Skill Council or the school concerned.
Time limit: Theory 1 hour 45 minutes; practical/skill assessment conducted by the Sector Skill Council or the school concerned
Exam fee: WBBSE does not publish a single per-candidate examination fee with the Madhyamik routine. Enrolment is made by the school online through wbbsedata.com within the Board's registration window, and the amount payable is set by the Board's enrolment circular for that session. Confirm the current figure with your school or the Board's notification rather than relying on a quoted estimate.

Keys to Passing

Complete 500+ practice questions
Score 80%+ consistently before scheduling
Focus on highest-weighted sections
Use our AI tutor for tough concepts

WBBSE Madhyamik Power (Vocational) Study Tips from Top Performers

1Practice Ohm's Law and power calculation formulas ($P = V \times I$, $V = I \times R$, $E = P \times t$) for circuit analysis questions.

2Understand the internal operating mechanisms and trip conditions of MCBs versus RCCBs.

3Memorize the color codes for AC single-phase and three-phase wiring per IS codes (Phase: Red/Yellow/Blue, Neutral: Black, Earth: Green/Green-Yellow).

4Review step-by-step procedures for installing pipe earthing, including charcoal and salt layer requirements.

5Know how to measure insulation resistance using a Megger and verify earth continuity using a multimeter.

Frequently Asked Questions

What is the format of the WBBSE Madhyamik Vocational Power examination?

The examination comprises a theoretical written paper evaluating electrical principles and safety, and a practical examination testing conduit wiring, cable jointing, distribution board assembly, and Megger testing.

Why is this question bank presented in English?

This module serves as an English-language MCQ study adaptation designed to help students verify concepts, master electrical terminology, and practice numerical calculations for the WBBSE Madhyamik Vocational Power curriculum.

Which electrician job role aligns with Class 10 Vocational Power?

The curriculum aligns with the Assistant Electrician (NSQF Level 2/3) job role under the Power Sector Skill Council (PSSC), preparing students for entry-level building electrification and maintenance.

What safety devices are emphasized in the WBBSE Power syllabus?

Key protective devices include MCBs for overcurrent and short-circuit protection, RCCBs/ELCBs for earth leakage protection, fuses, and pipe/plate earthing systems.

What passing score is required for WBBSE Madhyamik Vocational subjects?

Grade C (25-34 marks) is the minimum passing grade on WBBSE's seven-point scale; achieving Grade D (below 25) in any subject results in an overall unsuccessful result.

100+ Free WBBSE Madhyamik Power (Vocational) Practice Questions

Explore More West Bengal Madhyamik Vocational Subjects (WBBSE)

West Bengal Madhyamik Agriculture — Vocational

West Bengal Madhyamik Apparel — Vocational

West Bengal Madhyamik Automobile — Vocational

West Bengal Madhyamik Banking, Financial Services and Insurance — Vocational

West Bengal Madhyamik Beauty and Wellness — Vocational

West Bengal Madhyamik Construction — Vocational