All Practice Exams

100+ Free RBSE Sec Voc Telecom Practice Questions

Rajasthan RBSE Secondary Telecom — Vocational Code 112 practice questions are available now; exam metadata is being verified.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately
See RBSE subject-wise statistics for the current cycle on statistics2026.htm. Pass Rate
100+ Questions
100% Free

Loading practice questions...

2026 Statistics

Key Facts: RBSE Sec Voc Telecom Exam

112

RBSE subject code for Telecom

RBSE Secondary/Praveshika 2026 subject-wise statistics

80 + 20

Typical Theory + Sessional full marks pattern (total 100)

RBSE Class 10 syllabus examination scheme

3 h 15 m

Typical theory paper duration

RBSE Class 10 syllabus

33%

Common minimum pass threshold under RBSE regulations

RBSE examination regulations (confirm circular)

2026

Main examination cycle evidenced in official subject-wise statistics

rajeduboard.rajasthan.gov.in/statistics2026.htm

MCQ study aid

Local bank adapts knowledge to four-option MCQs; official paper is mixed format

OpenExamPrep assessment-format policy

RBSE Secondary (Class 10) Telecom (code 112): mixed board paper, typically Theory 80 + Sessional 20 = 100, 3h15m. Pass about 33% per RBSE rules. Fee as per board notification. Free English MCQ study aid — not a full mixed-paper simulation.

Sample RBSE Sec Voc Telecom Practice Questions

Try these sample questions to test your RBSE Sec Voc Telecom exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1What does telecommunication primarily mean?
A.Communication of information over a distance using electrical, optical, or radio signals
B.Only face-to-face conversation in the same room
C.Printing books and newspapers only
D.Storing data on paper files without transmission
Explanation: Telecommunication is the exchange of information (voice, data, video) over distance using electrical, optical, or electromagnetic media.
2Which statement correctly describes a digital signal used in modern telecom?
A.It varies continuously without discrete steps
B.It represents information as discrete levels such as 0 and 1
C.It can only travel through air, never through cable
D.It never needs a clock or timing reference in networks
Explanation: Digital signals use discrete states (typically binary 0/1) to represent information, which supports error control and efficient processing.
3The SI unit of signal frequency in telecommunications is the:
A.Ohm (Ω)
B.Decibel (dB)
C.Hertz (Hz)
D.Farad (F)
Explanation: Frequency is cycles per second, measured in Hertz (Hz) and multiples such as kHz, MHz, and GHz.
4A telephone conversation where both people can speak and listen at the same time is an example of:
A.Simplex communication
B.Broadcast-only communication
C.Store-and-forward only
D.Full-duplex communication
Explanation: Full-duplex allows simultaneous two-way transmission, as in a normal phone call.
5A computer network confined to a single home, school lab, or small office building is typically a:
A.LAN (Local Area Network)
B.WAN (Wide Area Network)
C.Satellite backbone only
D.International undersea cable only
Explanation: A LAN covers a limited geographic area such as a building or campus.
6Why is modulation used in many radio and telecom systems?
A.To permanently delete noise from the universe
B.To impress information onto a carrier wave suitable for transmission
C.To replace batteries inside every handset automatically
D.To convert copper into optical fiber
Explanation: Modulation places baseband information onto a higher-frequency carrier so it can be transmitted efficiently over radio or other channels.
7In traditional telephony, PSTN stands for:
A.Private Secure Tunnel Node
B.Packet Stream Transfer Number
C.Public Switched Telephone Network
D.Power Supply Terminal Network
Explanation: PSTN is the Public Switched Telephone Network—the classic circuit-switched phone system.
8In telecom, bandwidth of a channel most commonly refers to:
A.The physical thickness of the outer cable jacket only
B.The colour of the connector plastic
C.The number of employees at a call centre
D.The range of frequencies the channel can pass effectively
Explanation: Bandwidth is the usable frequency range (or related capacity) of a transmission channel.
9As a signal travels a long distance through a cable without amplification or regeneration, what typically happens?
A.Signal strength decreases due to attenuation
B.Signal frequency automatically doubles every kilometre
C.Noise completely disappears
D.The cable becomes superconducting at room temperature
Explanation: Attenuation is progressive loss of signal power with distance in the medium; boosters/amplifiers/regenerators counteract it.
10Signal-to-noise ratio (SNR) is important because:
A.SNR measures only the colour of LED indicators
B.A higher SNR generally means a clearer recoverable signal relative to noise
C.SNR is the same as cable bend radius
D.SNR only applies to paper forms, not networks
Explanation: SNR compares desired signal power to noise power; higher SNR supports better reception and fewer errors.

About the RBSE Sec Voc Telecom Practice Questions

Verified exam format metadata for Rajasthan RBSE Secondary Telecom — Vocational Code 112 is pending. The practice questions above remain available while official exam length, timing, passing score, fee, and administrator details are reviewed.