PracticeVideosBlogFlashcardsEspañol
All Practice Exams

100+ Free Punjab PSEB Matric Mechanical Drawing and Painting Practice Questions

Punjab School Education Board (PSEB) Matric Class 10 Mechanical Drawing and Painting practice questions are available now; exam metadata is being verified.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately
100+ Questions
100% Free

Loading practice questions...

Same family resources

Explore More Punjab PSEB Matric (Class 10) Subjects

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

Punjab PSEB Matric Agriculture

Practice Questions

Punjab PSEB Matric Computer Science

Practice Questions

Punjab PSEB Matric Cutting and Tailoring

Practice Questions

Punjab PSEB Matric English

Practice Questions

Punjab PSEB Matric French

Practice Questions

Punjab PSEB Matric German

Practice Questions
2026 Statistics

Key Facts: Punjab PSEB Matric Mechanical Drawing and Painting Exam

40+40+20

Theory + Practical + INA marks under Scheme of Studies

PSEB Scheme of Studies Class X (Mech. Drawing & Painting code 28)

Code 28

Subject code for Mech. Drawing & Painting

PSEB Scheme of Studies 2026–27

33%

Aggregate pass requirement (theory+practical+INA)

PSEB Scheme of Studies

25%

Minimum required in theory

PSEB Scheme of Studies (confirm current circular)

2 parts

Part-1 Geometrical/Mechanical Drawing + Part-2 Drawing and Painting

PSEB Mechanical Drawing and Painting syllabus outline

English MCQ adaptation

This free local bank is not the official practical or portfolio format

OpenExamPrep practice policy

PSEB Matric Mech. Drawing & Painting (code 28) is a Class 10 elective with Theory 40 + Practical 40 + INA 20 = 100. Pass is 33% aggregate with min 25% theory. Covers geometric/mechanical drawing and painting theory. Fees paid through schools. This free 2026 bank is an English MCQ study adaptation — practical drawing/painting and INA are not replaced here.

Sample Punjab PSEB Matric Mechanical Drawing and Painting Practice Questions

Try these sample questions to test your Punjab PSEB Matric Mechanical Drawing and Painting exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1Which instrument is primarily used to draw long horizontal lines parallel to the drawing board edge when guided along a T-square head?
A.Set square alone
B.T-square blade guided against the board edge
C.French curve only
D.Protractor alone
Explanation: A T-square has a head that rides on the board edge and a blade used to draw horizontal lines and to guide set squares for vertical and inclined lines.
2A 30°–60°–90° set square is most useful for drawing which pair of standard angles with a T-square?
A.Only 45° and 90°
B.30°, 60°, and combinations that yield 15° steps with a 45° set square
C.Only 120° and 150°
D.Only freehand sketch angles
Explanation: The 30°–60° set square produces 30° and 60° lines against a horizontal T-square; used with a 45° set square it supports common 15° increments used in technical drawing.
3What is the main use of a compass in geometrical drawing?
A.Measuring angles in degrees
B.Drawing circles and arcs of a chosen radius
C.Shading large watercolour washes
D.Cutting paper stencils only
Explanation: A drawing compass holds a pencil (or ink pen) at a fixed radius from a centre point to draw circles and arcs accurately.
4A divider is primarily used to:
A.Mix poster colours on a palette
B.Transfer or compare distances without marking a radius as a circle
C.Draw long freehand curves
D.Measure temperature of drying paint
Explanation: Dividers open to a distance and are used to transfer measurements, step off equal lengths, or compare sizes without necessarily drawing a full circle.
5Which instrument is designed for measuring and marking angles in degrees on a drawing sheet?
A.Scale rule only
B.Protractor
C.Mini-drafter scale only
D.Eraser shield
Explanation: A protractor is graduated in degrees and is used to measure existing angles or to mark a required angle from a baseline.
6French curves are used mainly to:
A.Draw irregular or non-circular curves smoothly
B.Replace all compass work for perfect circles
C.Mix oil and watercolour safely
D.Cut clay modelling tools
Explanation: French curves are templates with varied curved edges that help draw smooth irregular curves that are not simple circular arcs.
7For sharp construction lines that should not dominate the finished drawing, which pencil grade is generally preferred?
A.6B only
B.H or 2H for light construction lines
C.Only charcoal sticks
D.Only oil pastels
Explanation: Harder grades such as H or 2H make lighter, finer lines suited to construction layout; softer grades (B range) are darker for outlines and shading.
8Why should the drawing board’s working edge be straight and true?
A.Only for hanging finished art on a wall
B.So the T-square head rides accurately and horizontals stay parallel
C.To store wet paint brushes
D.To replace the need for a scale
Explanation: A true board edge lets the T-square head slide without wobble, keeping horizontal lines parallel and set-square angles reliable.
9A mini-drafter (or drafting machine) mainly combines the functions of:
A.Only a watercolour palette
B.T-square and set squares for parallel and angled lines
C.Only a clay extruder
D.Only a paper guillotine
Explanation: A mini-drafter clamps to the board and provides parallel motion with adjustable angle scales, replacing much T-square and set-square work.
10When inking finished mechanical lines, which practice is safest for accuracy?
A.Ink freehand over wet pencil smudges without guides
B.Use a technical pen or ruling pen along a clean guide after pencil layout is checked
C.Dilute ink with oil paint for shine
D.Ink only after folding the sheet
Explanation: Accurate inking follows a verified pencil construction, using a technical/ruling pen guided by a straightedge or template, with dry clean paper.

About the Punjab PSEB Matric Mechanical Drawing and Painting Practice Questions

Verified exam format metadata for Punjab School Education Board (PSEB) Matric Class 10 Mechanical Drawing and Painting is pending. The practice questions above remain available while official exam length, timing, passing score, fee, and administrator details are reviewed.