PracticeVideosBlogFlashcardsEspañol
All Practice Exams

Free Practice Questions for Maharashtra SSC Engineering Drawing ITI

Exam-style questions and explanations by OpenExamPrep.

✓ No registration✓ No credit card
100+ Questions
100% Free

Loading practice questions...

Same family resources

Explore More Maharashtra SSC (MSBSHSE Class 10)

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

Maharashtra SSC Agriculture — Pre-Vocational/NSQF (MSBSHSE)

Practice Questions

Maharashtra SSC Apparel Sewing Machine Operator — Pre-Vocational/NSQF (MSBSHSE)

Practice Questions

Maharashtra SSC Arabic — Second/Third Language (MSBSHSE)

Practice Questions

Maharashtra SSC Ardhamagadhi — Second/Third Language (MSBSHSE)

Practice Questions

Maharashtra SSC Arithmetic (MSBSHSE)

Practice Questions

Maharashtra SSC Assistant Beauty Therapist — Pre-Vocational/NSQF (MSBSHSE)

Practice Questions

Sample Maharashtra SSC Engineering Drawing ITI Practice Questions

Try these sample questions to review concepts for the Maharashtra SSC Engineering Drawing ITI exam. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1On a standard drawing board setup, the T-square is primarily used to:
A.Draw freehand free curves without guides
B.Provide a straight horizontal guide edge and support for set squares
C.Measure circular diameters only
D.Cut paper to sheet size
Explanation: The T-square stock rides along the board edge so the blade gives a true horizontal guide. Set squares rest on that blade to draw vertical and angled lines. It is not a curve tool, diameter gauge, or paper cutter.
2A set square used against a T-square is most useful for drawing:
A.Only freehand lettering guidelines of any shape
B.Only irregular free curves
C.Vertical lines and standard inclined lines such as 30°, 45°, and 60°
D.Only section hatching of any random angle
Explanation: Set squares (30°–60° and 45°) guided on a T-square produce vertical lines and common inclined angles. Irregular curves need French curves; lettering and hatching still follow line standards but are not the set square’s only purpose.
3A compass in engineering drawing is mainly intended to:
A.Draw circles and arcs of a controlled radius
B.Only measure angles in degrees
C.Only transfer lengths without a pencil point
D.Only erase unwanted lines cleanly
Explanation: A compass holds a pencil (or pen) at a fixed distance from a centre point so circles and arcs can be drawn accurately.
4A divider (as distinct from a compass) is best used to:
A.Ink title-block borders only
B.Transfer or step off equal lengths and compare distances without drawing arcs
C.Draw large filled circles in one stroke
D.Measure only the hardness of pencil leads
Explanation: Dividers have two sharp points and no lead; they step off equal segments, transfer lengths, and compare distances on drawings or scales.
5French curves are used mainly to:
A.Draw perfect circles of any radius
B.Letter only capital alphabets
C.Hatch every sectional area automatically
D.Guide smooth irregular curves that are not simple circular arcs
Explanation: French curves are templates with changing curvature for guiding smooth non-circular curves such as transition curves on freehand layouts.
6For light construction lines that can be erased later, a commonly preferred pencil grade is:
A.2B or softer only, pressed hard
B.2H or harder grades used lightly
C.6B charcoal sticks only
D.Ink pen exclusively for all layout work
Explanation: Harder grades such as 2H produce light, fine construction lines that are easy to keep clean and erase. Soft dark grades smudge and are better for finished outlines if pencil-finished work is used.
7A mini-drafter (drafting machine) is preferred in many classrooms because it can:
A.Replace all freehand sketching practice forever
B.Eliminate the need for scales and dimension rules
C.Provide parallel motion and set angles so separate T-square and set-square setups are often unnecessary
D.Automatically invent missing orthographic views
Explanation: A mini-drafter combines sliding parallel motion with adjustable angular heads, reducing separate T-square/set-square setups. Theory, scales, freehand skill, and projection reasoning still matter.
8A protractor in engineering drawing is primarily used to:
A.Only draw perfect squares
B.Only sharpen pencil points
C.Only erase hatching lines
D.Measure or set angles in degrees
Explanation: Protractors measure and mark angular sizes in degrees. Squares use set squares/T-squares; sharpening and erasing use other tools.
9Drawing paper is usually fastened to the board so that:
A.Only one corner is free to rotate while drawing
B.The paper hangs loosely to allow freehand stretching
C.The sheet is flat, square to the board edges, and does not shift during line work
D.Ink always dries faster regardless of fastening
Explanation: Clips or tape hold the sheet flat and aligned so horizontal and vertical guides remain true. Loose or skewed sheets introduce angular errors.
10An eraser shield is useful because it:
A.Protects surrounding lines while a small area is erased through openings in the shield
B.Replaces the need for any hard pencil grades
C.Automatically redraws erased outlines
D.Measures radius of circles while erasing
Explanation: An eraser shield is a thin plate with slots so only the selected line segment is erased while nearby work is protected.

About the Maharashtra SSC Engineering Drawing ITI Exam

Maharashtra SSC Engineering Drawing under MSBSHSE is a Class 10 ITI pathway subject (commonly subject code I1 on modern SSC subject lists; confirm your hall ticket). Core learning themes include drawing instruments, lettering, scales, orthographic projections, isometric views, sections, dimensioning, and freehand sketching. Official assessment often combines theory with practical, project, performance, or school-based evidence depending on the subject scheme. About 35% is widely reported as the SSC subject pass floor—confirm the year's notification. This free bank provides English four-option MCQs for knowledge and judgment practice only—pair with official school materials via mahahsscboard.in.

Exam sponsor: Maharashtra State Board of Secondary and Higher Secondary Education (MSBSHSE), Pune. The requirements and fees below concern the certification or admission exam, separate from our free practice resources.

Assessment

Typical SSC ITI pathway subject pattern: written theory and/or practical/project/performance/internal evidence as per scheme (confirm year's school/board notice). Local bank: English MCQ study adaptation only.

Time Limit

As notified on the year's MSBSHSE SSC timetable for theory where applicable; other components scheduled separately

Passing Score

35%

Exam / Certification Fees

As notified by MSBSHSE and paid through affiliated secondary schools (no single fixed public subject fee for all categories).

Exam sponsor website

Reported exam pass rate: Not published as a fixed subject-wise standing figure for this subject. Exam sponsor website

Fees, eligibility, and exam policies can change. Confirm them with the exam sponsor before applying or paying.

Our practice resources: topics covered

We aim to reflect publicly available exam outlines and topic information in our study resources. Coverage, format, and difficulty may differ from the actual exam, and we cannot guarantee that every detail is accurate or current. Confirm exam requirements, fees, and policies with the official exam sponsor.

~10% of this local bank

Instruments and Materials

T-square, set squares, compass

~12% of this local bank

Lettering and Lines

Types of lines, standard lettering

~12% of this local bank

Scales and Units

Full/half/enlarged scale

~12% of this local bank

Geometric Construction

Bisectors, polygons, ellipses orientation

~18% of this local bank

Orthographic Projection

First/third angle concepts, views

~14% of this local bank

Isometric and Pictorial

Isometric axes, simple solids

~14% of this local bank

Sections and Dimensioning

Section lines, dimension rules

~8% of this local bank

Sketching and Reading Drawings

Freehand, title block, notes

Preparing for the Maharashtra SSC Engineering Drawing ITI Exam

What You Need to Know

  • Passing score: 35%
  • Assessment: Typical SSC ITI pathway subject pattern: written theory and/or practical/project/performance/internal evidence as per scheme (confirm year's school/board notice). Local bank: English MCQ study adaptation only.
  • Time limit: As notified on the year's MSBSHSE SSC timetable for theory where applicable; other components scheduled separately
  • Exam / certification fees: As notified by MSBSHSE and paid through affiliated secondary schools (no single fixed public subject fee for all categories). Official sources

Using Our Practice Resources

  • Work through all 100 available questions
  • Review every answer and explanation
  • Track weak areas and revisit them
  • Use our AI tutor for tough concepts

Frequently Asked Questions

How is Maharashtra SSC Engineering Drawing officially examined?

It is examined under the Maharashtra Secondary School Certificate as a Class 10 ITI pathway subject (commonly code I1). Logistics may combine written theory with practical, project, performance, or internal assessment depending on the subject scheme. Candidates generally need about 35% with separate floors as notified. Confirm the year's syllabus and circulars with your school and mahahsscboard.in.

Is this practice bank the same format as the official SSC paper?

No. Official assessment may mix written theory with practical, project, or performance evidence. This bank is an English-language multiple-choice study adaptation for concepts and judgment only—not an official blueprint replica or practical/performance certification substitute.

What subject code is used for Engineering Drawing?

Modern Maharashtra SSC subject lists commonly show code I1 for Engineering Drawing. Always confirm the code printed on your hall ticket and school registration because board circulars can refine titles or codes.

In which languages is the official assessment offered?

Maharashtra SSC subject materials and papers are commonly available in English and Marathi mediums (and other media as notified for some subjects). This practice bank is an English-language study adaptation, not an official translation of the board paper.

How should I use these free MCQs?

Study your school syllabus first, then drill this bank by category. Read every wrong-option explanation, keep a practical/project journal if required, and re-test weak topics under timed conditions before board week.