100+ Free B&WSSC Nail Technician Practice Questions

Pass your B&WSSC Nail Technician Assessment (Beauty & Wellness SSC, India) exam on the first try — instant access, no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately

~80% Pass Rate

100+ Questions

100% Free

Loading practice questions...

Sample B&WSSC Nail Technician Practice Questions

Try these sample questions to test your B&WSSC Nail Technician exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1What is the primary purpose of a Safety Data Sheet (SDS), formerly known as MSDS, in a nail salon?

A.To advertise new nail care products to clients

B.To provide detailed safety and hazard information about chemical products

C.To track the salon's monthly inventory and sales

D.To list the pricing of salon services

Explanation: A Safety Data Sheet (SDS) is a standard document that provides detailed information about a chemical product's properties, physical/health hazards, safe handling, storage, and emergency response procedures.

2Which of the following describes the difference between sanitizing and disinfecting?

A.Sanitizing sterilizes tools, while disinfecting only wipes them clean

B.Sanitizing reduces the number of pathogens on a surface, while disinfecting destroys most pathogens on non-porous surfaces

C.Sanitizing uses high heat, while disinfecting uses radiation

D.Sanitizing is only for hands, while disinfecting is only for floor cleaning

Explanation: Sanitizing is the process of reducing pathogens on a surface to safe levels, typically using soap and water. Disinfecting is a higher level of decontamination that destroys most harmful bacteria, viruses, and fungi on non-porous surfaces.

3What is the first step a nail technician must take immediately after a blood exposure incident occurs?

A.Apply antiseptic to the wound

B.Put on protective gloves and stop the service

C.Clean the workstation with bleach

D.Double-bag all contaminated items

Explanation: In the event of a blood exposure incident, the nail technician must immediately stop the service, put on protective gloves, and attend to the injury to prevent cross-contamination before cleaning or continuing.

4How should single-use items, such as wooden orange wood sticks or cotton pads, be handled after a service?

A.Disinfected in a wet sanitizer for 10 minutes

B.Washed with soap and water and dried for reuse

C.Discarded immediately in a closed waste container

D.Stored in a clean cabinet for the same client's next visit

Explanation: Single-use items are porous and cannot be properly disinfected. They must be discarded immediately in a closed waste receptacle after one use to maintain strict hygiene standards.

5According to general hygiene standards, what is the minimum duration a nail technician should wash their hands with soap and water before starting a service?

A.5 seconds

B.10 seconds

C.20 seconds

D.60 seconds

Explanation: Nail technicians must wash their hands thoroughly with soap and water for at least 20 seconds, ensuring they scrub the back of their hands, between fingers, and under nails before starting any client service.

6What class of chemical disinfectants is most commonly recommended for sanitizing non-porous implements in a nail salon?

A.Isopropyl alcohol (70%)

B.Quaternary Ammonium Compounds (Quats)

C.Formalin solutions

D.Pine oil cleaner

Explanation: Quaternary Ammonium Compounds (Quats) are advanced salon-grade disinfectants designed to be bactericidal, virucidal, and fungicidal. They require a complete immersion time (usually 10 minutes) to sanitize non-porous metal implements.

7When preparing a chlorine bleach solution for disinfecting salon equipment, what is the correct standard dilution ratio and contact time?

A.1 part bleach to 9 parts water, 10 minutes contact time

B.1 part bleach to 99 parts water, 1 minute contact time

C.5 parts bleach to 5 parts water, 30 minutes contact time

D.1 part bleach to 1000 parts water, overnight contact time

Explanation: A standard bleach solution for disinfecting non-porous surfaces uses a 10% dilution (1 part bleach to 9 parts water) and requires a contact time of 10 minutes to effectively destroy surface pathogens.

8Which ventilation system is recommended to safely capture and remove volatile organic compounds (VOCs) and dust directly from the nail technician's work zone?

A.A ceiling exhaust fan

B.A portable desk fan blowing air across the table

C.A local source capture exhaust system

D.An open window next to the manicure station

Explanation: A local source capture exhaust system pulls chemical vapors, dust, and VOCs directly from the breathing zone of the technician and client, venting them outside or filtering them through activated carbon.

9What is the correct protocol for cleaning and disinfecting a pedicure foot basin/tub after each client service?

A.Rinse with warm water and wipe with a clean towel

B.Drain water, scrub with soap and water to remove debris, fill with disinfectant solution for 10 minutes, drain and rinse

C.Spray with alcohol and let it air dry

D.Fill with boiling water for 5 minutes

Explanation: To properly disinfect a pedicure basin, you must first drain all water, scrub all surfaces with soap and water to remove organic matter, fill the basin with an EPA-registered hospital disinfectant for 10 minutes, then drain, rinse, and dry.

10What is the correct step-by-step procedure for preparing metal implements for disinfection?

A.Soak in disinfectant, scrub with soap, rinse, dry

B.Scrub with soap and water, rinse, dry completely, then immerse in disinfectant solution

C.Wipe with alcohol, rinse, and place in a UV cabinet

D.Immerse in hot water, apply antiseptic, and store in a drawer

Explanation: Before metal implements are immersed in disinfectant, they must be physically scrubbed with soap and water to remove oils, skin cells, and debris, rinsed, and dried completely. Water dilutes the disinfectant, reducing its efficacy.

About the B&WSSC Nail Technician Exam

The Beauty & Wellness Sector Skill Council (B&WSSC) India Nail Technician assessment validates competency in nail anatomy, manicure, pedicure, acrylic and gel extensions, nail art, and sanitation standards under NSQF Level 4.

Questions

30 scored questions

Time Limit

45 minutes

Passing Score

70%

Exam Fee

₹1,000 - ₹2,000 / PMKVY Funded (Beauty & Wellness Sector Skill Council (B&WSSC), India)

B&WSSC Nail Technician Exam Content Outline

20%

Workplace Health, Safety & Hygiene

Sanitation, sterilization, chemical safety, first aid, and personal protective equipment

25%

Nail Science & Disorders

Nail structure, anatomy, growth cycle, disorders, diseases, and contraindications

30%

Manicure, Pedicure & Core Services

Traditional manicure, pedicure, massage techniques, and nail preparation

25%

Nail Enhancements, Nail Art & Electric Filing

UV gel extensions, acrylic liquid/powder overlays, refills, electric filing safety, and basic/advanced nail art application

How to Pass the B&WSSC Nail Technician Exam

What You Need to Know

Passing score: 70%
Exam length: 30 questions
Time limit: 45 minutes
Exam fee: ₹1,000 - ₹2,000 / PMKVY Funded

Keys to Passing

Complete 500+ practice questions
Score 80%+ consistently before scheduling
Focus on highest-weighted sections
Use our AI tutor for tough concepts

Frequently Asked Questions

What is the B&WSSC Nail Technician assessment?

It is a skill assessment conducted by the Beauty & Wellness Sector Skill Council under the National Skill Development Corporation (NSDC) of India to certify professionals for the Nail Technician job role (QP BWS/Q0403).

What is the passing score for the B&WSSC assessment?

Candidates must achieve a minimum aggregate score of 70% across both theory and practical components to pass and receive certification.

How long is the theory exam?

The theory exam is 45 minutes long and typically consists of 30 multiple-choice questions.