PracticeVideosBlogFlashcardsEspañol
All Practice Exams

Free Practice Questions for PII Insinyur Profesional Pratama

Exam-style questions and explanations by OpenExamPrep.

✓ No registration✓ No credit card
100+ Questions
100% Free

Loading practice questions...

Exam Review

Key Facts: PII Insinyur Profesional Pratama Exam

600 pts

Minimum FAIP score for IPP (3,000 for IPM; 6,000 for IPU)

PII FAIP qualification criteria (PSPPI IPB FAIP guidance)

Rp1,100,000

SKIP fee for the IPP level

PII certification page, checked 2026-09-13

5 years

Validity of the Sertifikat Kompetensi Insinyur

PP No. 25 Tahun 2019, Article 18(3)

4 units

Mandatory competency units W1 to W4

PII Bakuan Kompetensi Insinyur Profesional

PII's SKIP competency test scores a FAIP portfolio submitted in SIMPoNI. Each activity is rated T = P × Q × R, with minimum totals of 600 for IPP, 3,000 for IPM and 6,000 for IPU. IPP certificates are issued directly after assessment, while IPM and IPU results go to an interview. PII lists fees of Rp1,100,000 (IPP), Rp1,650,000 (IPM) and Rp2,200,000 (IPU), and the certificate is valid for 5 years. These questions are an independent English-language MCQ study adaptation, not an official translation or interview simulation.

Sample PII Insinyur Profesional Pratama Practice Questions

Try these sample questions to review concepts for the PII Insinyur Profesional Pratama exam. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1Under Article 10 of UU No. 11 Tahun 2014 tentang Keinsinyuran, what must every Insinyur hold before carrying out engineering practice (Praktik Keinsinyuran) in Indonesia, and who issues it?
A.A Sertifikat Kompetensi Kerja (SKK) Konstruksi, registered by LPJK
B.A Surat Tanda Registrasi Insinyur (STRI), issued by Persatuan Insinyur Indonesia (PII)
C.A professional engineer licence issued by the Ministry of Public Works
D.A competency certificate issued directly by the Dewan Insinyur Indonesia (DII)
Explanation: Article 10(1) of UU 11/2014 says every Insinyur who will carry out engineering practice in Indonesia must hold a Surat Tanda Registrasi Insinyur, and Article 10(2) says the STRI is issued by PII. Article 11 adds that an engineer needs a Sertifikat Kompetensi Insinyur, obtained by passing an Uji Kompetensi, to receive the STRI.
2According to Article 11 of UU No. 11 Tahun 2014, what must an Insinyur hold in order to obtain an STRI?
A.A Sertifikat Kompetensi Insinyur obtained after passing an Uji Kompetensi
B.An ASEAN Chartered Professional Engineer (ACPE) registration
C.A PSPPI transcript showing 24 SKS of coursework, with no further assessment
D.A reference letter from the employer countersigned by a PII branch
Explanation: Article 11(1) requires an Insinyur to hold a Sertifikat Kompetensi Insinyur to obtain the STRI, and Article 11(2) says that certificate is obtained after passing an Uji Kompetensi carried out by a professional certification body. PP No. 25 Tahun 2019 Article 18 repeats this and sets the certificate's validity at 5 years.
3A person who is not an Insinyur acts as an engineer, and the work causes a structural failure with loss of property. What maximum criminal penalty does Article 50(2) of UU No. 11 Tahun 2014 set?
A.Imprisonment of up to 2 years or a fine of up to Rp200,000,000
B.Imprisonment of up to 5 years and/or a fine of up to Rp1,000,000,000
C.Imprisonment of up to 10 years and/or a fine of up to Rp1,000,000,000
D.Administrative sanctions only: a written warning and temporary cessation of activity
Explanation: Article 50(2) covers a non-engineer who practises and acts as an engineer where this causes an accident, disability, death, failure of engineering work, and/or loss of property: imprisonment of up to 10 years and/or a fine of up to Rp1 billion. Article 50(1) sets the lower penalty when no such harm results.
4A registered Insinyur carries out design work that does not meet engineering standards (standar Keinsinyuran), and the resulting failure injures workers. Which provision of UU No. 11 Tahun 2014 applies, with what maximum penalty?
A.Article 50(2): imprisonment of up to 10 years and/or a fine of up to Rp1 billion
B.Article 50(1): imprisonment of up to 2 years or a fine of up to Rp200 million
C.Article 15: a written warning and/or temporary cessation of engineering activity
D.Article 51: imprisonment of up to 5 years and/or a fine of up to Rp1 billion
Explanation: Article 51 applies to an Insinyur or Insinyur Asing who performs professional duties without meeting engineering standards under Article 25(c), causing an accident, disability, death, failure of engineering work, and/or loss of property. The maximum is 5 years' imprisonment and/or a Rp1 billion fine.
5An Insinyur carries out engineering activities without an STRI, but the work causes no material loss. Which sanctions does Article 15 of UU No. 11 Tahun 2014 provide?
A.Administrative sanctions: a written warning and/or temporary cessation of engineering activities
B.Revocation of the Insinyur (Ir.) professional title by the awarding university
C.Imprisonment of up to 2 years or a fine of up to Rp200,000,000
D.An administrative fine only, set as a percentage of the contract value
Explanation: Article 15(1)-(2) makes an Insinyur who works without an STRI liable to administrative sanctions: a written warning and/or temporary cessation of engineering activities. Article 15(3) adds a fine only where the activity causes material loss. PP 25/2019 Article 30 repeats these sanctions.
6Which sanction can be imposed under Article 16 of UU No. 11 Tahun 2014 on an STRI holder whose engineering activity causes material loss, but is not listed in Article 15 for an engineer who simply works without an STRI?
A.A written warning
B.Freezing (pembekuan) or revocation (pencabutan) of the STRI
C.Temporary cessation of engineering activities
D.A fine where the activity caused material loss
Explanation: Article 16(2) lists a written warning, a fine, temporary cessation, freezing of the STRI, and/or revocation of the STRI for a registered engineer who causes material loss. Freezing and revocation appear only there, because an engineer without an STRI has no registration to freeze or revoke.
7How long is an STRI valid under UU No. 11 Tahun 2014, and what must the holder satisfy to re-register?
A.3 years; re-registration requires only payment of PII membership dues
B.5 years; re-registration requires repeating the Program Profesi Insinyur and a new FAIP portfolio
C.Valid for life unless PII revokes it for malpractice
D.5 years; re-registration requires a valid competency certificate and meeting PKB requirements
Explanation: Article 13 says the STRI is valid for 5 years and is re-registered every 5 years, provided the holder still meets the Article 11 requirement (a competency certificate) and the Pengembangan Keprofesian Berkelanjutan requirements. PP 25/2019 Article 22 repeats this, and PII carries out PKB.
8Under UU No. 11 Tahun 2014, which body is responsible to the President and has the function of formulating engineering policy and supervising how engineering practice is carried out?
A.Persatuan Insinyur Indonesia (PII)
B.Lembaga Pengembangan Jasa Konstruksi (LPJK)
C.Dewan Insinyur Indonesia (DII)
D.Badan Nasional Sertifikasi Profesi (BNSP)
Explanation: Article 30 establishes the Dewan Insinyur Indonesia, responsible to the President, with at least five members drawn from government, industry, higher education, PII, and users of engineering. Article 31 gives it the function of formulating policy and supervising engineering practice.
9Which of these tasks does UU No. 11 Tahun 2014 assign to the Dewan Insinyur Indonesia rather than to PII?
A.Issuing, extending, freezing and revoking STRIs
B.Setting the policy for the Uji Kompetensi system and the engineer competency standard
C.Establishing a majelis kehormatan etik to enforce the code of ethics
D.Carrying out engineer registration
Explanation: Article 32 lists DII tasks, including setting the registration-system policy, setting the Uji Kompetensi system policy, setting the engineer competency standard, and setting PKB standards. PII carries out registration and issues, extends, freezes and revokes STRIs (Articles 38-39), and it forms the ethics council (Article 40).
10To enforce the engineers' code of ethics, what does Article 40 of UU No. 11 Tahun 2014 require PII to establish?
A.A majelis kehormatan etik (ethics honour council), whose structure and duties are set in PII's statutes (AD/ART)
B.A disciplinary tribunal appointed by the Dewan Insinyur Indonesia
C.A separate ethics board in each Badan Kejuruan, whose rulings the Minister approves
D.An ethics committee inside each university that runs a professional engineer programme
Explanation: Article 40(1) says PII forms a majelis kehormatan etik to enforce the code of ethics, and Article 40(2) leaves its structure, functions and duties to PII's articles of association and bylaws. The current Kode Etik Insinyur 2021 was issued by PII's Majelis Kehormatan Etik.

About the PII Insinyur Profesional Pratama Exam

Insinyur Profesional Pratama (IPP) is the first level of PII's Sertifikat Kompetensi Insinyur Profesional (SKIP), awarded through a FAIP portfolio assessment under UU No. 11 Tahun 2014 and PP No. 25 Tahun 2019. This bank also covers the IPM and IPU levels, which use the same assessment, and is an English-language study adaptation.

Exam sponsor: Persatuan Insinyur Indonesia (PII) — Lembaga Sertifikasi Kompetensi Insinyur (LSKI). The requirements and fees below concern the certification or admission exam, separate from our free practice resources.

Assessment

Applicants complete the Formulir Aplikasi Insinyur Profesional (FAIP) in SIMPoNI, describing engineering work since S1/D4 graduation against mandatory units W1 (code of ethics), W2 (engineering practice), W3 (planning and design) and W4 (management and communication), plus elective units. The Majelis Uji Kompetensi of the relevant Badan Kejuruan scores each activity. PII issues the certificate directly for an IPP result; IPM and IPU results go to an interview.

Time Limit

No timed sitting; the FAIP is completed online in SIMPoNI and then assessed by the Majelis Uji Kompetensi.

Passing Score

FAIP minimum score of 600 for IPP (3,000 for IPM; 6,000 for IPU), with IPP unit minimums of W1 60, W2 180, W3 120, W4 60 and electives 180

Exam / Certification Fees

Rp1,100,000 for IPP (Rp1,650,000 for IPM; Rp2,200,000 for IPU), paid as an Rp1,100,000 assessment fee first plus any balance for the assessed level

Exam sponsor website

Reported exam pass rate: Not published. Exam sponsor website

Fees, eligibility, and exam policies can change. Confirm them with the exam sponsor before applying or paying.

Our practice resources: topics covered

We aim to reflect publicly available exam outlines and topic information in our study resources. Coverage, format, and difficulty may differ from the actual exam, and we cannot guarantee that every detail is accurate or current. Confirm exam requirements, fees, and policies with the official exam sponsor.

15 of 100 questions

Statutory Framework: UU 11/2014 and PP 25/2019

STRI registration and 5-year re-registration, competency certificates, DII and PII roles, the ethics council, Program Profesi Insinyur routes (RPL and equivalency), foreign engineers, and administrative and criminal sanctions.

18 of 100 questions

Kode Etik Insinyur 2021 and Unit W1 Ethics

Prinsip Dasar, Aturan Praktik and Tata Laku Insinyur: public safety, practising within competence, signing documents, objectivity, conflicts of interest, supplier benefits, honest FAIP claims, confidentiality, intellectual property, and reporting violations.

17 of 100 questions

FAIP, SKIP Procedure and Scoring

Applying through SIMPoNI, MUK assessment by the Badan Kejuruan, T = P × Q × R scoring, level and unit minimums, IPP/IPM/IPU descriptors, interviews for IPM and IPU, fees, and certificate validity.

15 of 100 questions

Engineering Practice and Quality (Unit W2)

Limits of expertise, engineering records, quality assurance and control, testing and calibration, engineering analysis, failure investigation, non-destructive testing, data integrity, and SNI status.

15 of 100 questions

Planning and Design (Unit W3)

Design briefs and parameters, design stages and FEED, engineering economics, HAZOP and FMEA, AMDAL and UKL-UPL environmental approval, design change control, constructability, and design impacts.

20 of 100 questions

Management, Communication and K3LL (Unit W4)

SMK3 and the hierarchy of controls, earned value, CPM, PERT and WBS, FIDIC notices and delay claims, leadership, communication, HIRADC, JSA, permit-to-work, LOTO, Ahli K3, and interview-style scenarios.

Preparing for the PII Insinyur Profesional Pratama Exam

What You Need to Know

  • Passing score: FAIP minimum score of 600 for IPP (3,000 for IPM; 6,000 for IPU), with IPP unit minimums of W1 60, W2 180, W3 120, W4 60 and electives 180
  • Assessment: Applicants complete the Formulir Aplikasi Insinyur Profesional (FAIP) in SIMPoNI, describing engineering work since S1/D4 graduation against mandatory units W1 (code of ethics), W2 (engineering practice), W3 (planning and design) and W4 (management and communication), plus elective units. The Majelis Uji Kompetensi of the relevant Badan Kejuruan scores each activity. PII issues the certificate directly for an IPP result; IPM and IPU results go to an interview.
  • Time limit: No timed sitting; the FAIP is completed online in SIMPoNI and then assessed by the Majelis Uji Kompetensi.
  • Exam / certification fees: Rp1,100,000 for IPP (Rp1,650,000 for IPM; Rp2,200,000 for IPU), paid as an Rp1,100,000 assessment fee first plus any balance for the assessed level Official sources

Using Our Practice Resources

  • Work through all 100 available questions
  • Review every answer and explanation
  • Track weak areas and revisit them
  • Use our AI tutor for tough concepts

PII Insinyur Profesional Pratama: Suggested Study Strategy

1Learn the six Prinsip Dasar of Kode Etik Insinyur 2021 and how its Aturan Praktik apply to signing documents, conflicts of interest and honest FAIP claims.
2Practise FAIP arithmetic: calculate T = P × Q × R for each activity, then check both the total and each unit minimum (IPP: W1 60, W2 180, W3 120, W4 60, electives 180).
3Know the UU 11/2014 and PP 25/2019 rules on STRI registration, 5-year validity, PKB, foreign engineers, and the difference between administrative and criminal sanctions.
4For an IPM or IPU interview, rehearse explaining your actual role, decisions, K3 controls and trade-offs on the projects you claim in the FAIP.

Frequently Asked Questions

What is the legal basis for professional engineer certification in Indonesia?

UU No. 11 Tahun 2014 tentang Keinsinyuran and PP No. 25 Tahun 2019 require every Insinyur practising in Indonesia to hold a Surat Tanda Registrasi Insinyur (STRI) issued by PII. To obtain the STRI, an engineer needs a Sertifikat Kompetensi Insinyur obtained by passing an Uji Kompetensi. PII's SKIP is that certificate, and it is valid for 5 years.

What are the differences among the IPP, IPM and IPU levels?

PII awards SKIP at three levels from the same FAIP assessment. FAIP guidance sets minimum scores of 600 for Insinyur Profesional Pratama (IPP), 3,000 for Insinyur Profesional Madya (IPM) and 6,000 for Insinyur Profesional Utama (IPU), with a minimum for each competency unit. PII issues IPP certificates directly after assessment; IPM and IPU results go to an interview.

How is the Formulir Aplikasi Insinyur Profesional (FAIP) scored?

Majelis Uji Kompetensi assessors rate each claimed activity for experience (P), role or participation (Q) and complexity (R), each as a whole number from 1 to 4, and multiply the ratings (T = P × Q × R). At IPP the unit minimums are W1 60, W2 180, W3 120, W4 60 and electives 180.

What are the PII certification fees and how long is the certificate valid?

PII's certification page lists SKIP fees of Rp1,100,000 for IPP, Rp1,650,000 for IPM and Rp2,200,000 for IPU. Applicants pay an Rp1,100,000 assessment fee first and any balance after the level is assessed. PP No. 25 Tahun 2019 sets the competency certificate's validity at 5 years, and STRI re-registration also requires continuing professional development (PKB).

Which code of ethics applies to Indonesian engineers?

PII's current Kode Etik Insinyur (KEI 2021), issued by its Majelis Kehormatan Etik in December 2021, sets out six basic principles, rules of practice and standards of conduct. It succeeds the earlier Catur Karsa Sapta Dharma code.

Are these practice questions an official PII exam?

No. PII's assessment is a FAIP portfolio review, with interviews for IPM and IPU results, and it has no multiple-choice exam. These questions are an independent English-language MCQ study adaptation, not an official translation, a FAIP tool, or an interview simulation. They cover the Bakuan Kompetensi units, Kode Etik Insinyur 2021, Indonesian engineering law and scenario judgement.