100+ Free CTVET Ghana Certificate II — Carpentry Practice Questions

Pass your Commission for Technical and Vocational Education and Training Ghana Certificate II — Carpentry exam on the first try — instant access, no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately

100+ Questions

100% Free

Loading practice questions...

Same family resources

Explore More Ghana CTVET Technical & Vocational Trades

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

2026 Statistics

Key Facts: CTVET Ghana Certificate II — Carpentry Exam

50%

Passing Mark (Grade C6)

CTVET Grading Scale

2 Hours

Theory Exam Duration

CTVET Syllabus

100

Practice Questions

Study Bank

Act 328

Ghana Safety Act

Factories Act, 1970

The CTVET Ghana Certificate II in Carpentry is the national qualification for professional woodworkers and framing carpenters in Ghana. The certification includes a 2-hour theory paper and a hands-on practical skills exam testing wood joints, roofing, formwork, and finishing. A Grade C6 (50%+) is required to pass. This study bank provides 100 comprehensive questions aligned to the official syllabus.

Sample CTVET Ghana Certificate II — Carpentry Practice Questions

Try these sample questions to test your CTVET Ghana Certificate II — Carpentry exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1Which legislation in Ghana regulates health, safety, and welfare conditions in carpentry workshops and construction sites?

A.Ghana Highway Code

B.Factories, Offices and Shops Act, 1970 (Act 328)

C.Ghana Environmental Protection Agency Act, 1994

D.Ghana Standards Authority Guidelines

Explanation: The Factories, Offices and Shops Act, 1970 (Act 328) is the primary law in Ghana that governs safety, health, and welfare in workplaces like workshops. It mandates proper ventilation, sanitation, first aid, and machine guarding to protect workers.

2When using a table saw or surface planer, what safety device is used to feed narrow timber stock past the cutter block or blade?

A.A wooden push stick

B.A steel pry bar

C.An assistant's hand

D.A pair of pliers

Explanation: A push stick is a safety device made of wood or plastic used to feed timber past a cutter or blade when the distance is too narrow. This keeps the operator's hands at a safe distance, preventing accidental contact and severe injury.

3Which long-term health hazard is associated with continuous exposure to fine hardwood dust without wearing a proper dust mask or respirator?

A.Skin discoloration

B.Nasal cavity cancers and occupational asthma

C.Chronic high blood pressure

D.Loss of hearing

Explanation: Wood dust, particularly from hardwoods, is classified as a human carcinogen. Chronic inhalation of fine dust particles damages the respiratory tract, leading to occupational asthma, chronic bronchitis, and increased risk of nasal cavity cancers.

4A fire involving dry wood shavings and sawdust in the workshop is classified under which fire category?

A.Class A fire

B.Class B fire

C.Class C fire

D.Class D fire

Explanation: Class A fires involve ordinary combustible materials such as wood, paper, cloth, and rubber. Water-based or dry chemical extinguishers are used to cool and extinguish these fires.

5Why is a standard carbon dioxide (CO2) extinguisher less effective than water for extinguishing a deep-seated Class A wood shavings fire?

A.CO2 reacts chemically with wood to increase burning.

B.CO2 does not cool the glowing embers, allowing the fire to reignite once the gas dissipates.

C.CO2 is highly toxic to wood fibers.

D.CO2 can only be used on metal fires.

Explanation: Deep-seated wood fires require a cooling agent (like water) to lower the temperature of the glowing embers below their ignition point. CO2 gas smothers flames temporarily but provides no cooling effect, meaning the wood can easily reignite when oxygen returns.

6What is the primary purpose of wearing steel-toed safety boots in a technical carpentry workshop?

A.To prevent electrical shocks from hand tools

B.To protect the feet from heavy dropped timber and sharp projecting nails

C.To improve grip when climbing ladders

D.To keep the feet warm in air-conditioned spaces

Explanation: Steel-toed boots protect the feet from impact injuries caused by falling timber, heavy tools, or materials. They also feature puncture-resistant soles that protect against stepped-on sharp objects like nails and screws.

7In a carpentry workshop, what is the main function of a cyclone dust extractor connected to woodworking machines?

A.To cool down the machine motors during operation

B.To extract moisture from the timber before cutting

C.To capture and separate fine wood dust particles from the workshop air at the source

D.To blow cool air onto the operator

Explanation: Cyclone dust extractors capture sawdust and fine wood dust directly from the exhaust ports of machines. They use centrifugal force to separate heavier dust particles and drop them into a collection bin, preventing fine dust from circulating in the air.

8Where should highly flammable wood finishes, lacquer thinners, and timber preservatives be stored in a carpentry workshop?

A.On open shelves near the main exit for quick access

B.Under the table saw workbench next to electric motors

C.In a designated, ventilated metal fire-safety cabinet

D.In a plastic storage bin in the wood seasoning yard

Explanation: Ventilated metal fire-safety cabinets are designed to contain flammable chemicals, prevent vapor buildup, and resist heat. This isolates fuel sources from potential ignition hazards like sparks or electrical faults.

9What is the immediate first-aid treatment for a student who gets a splash of chemical solvent or wood preservative in their eyes?

A.Rub the eyes vigorously with a clean cotton rag

B.Flush the eyes continuously with clean running water for at least 15 minutes

C.Apply wood glue to seal the chemical away from the cornea

D.Wait for 2 hours to see if the irritation stops

Explanation: Chemical splashes require immediate dilution and removal to prevent chemical burns on the cornea. Continuous flushing with clean running water or an eyewash station for at least 15 minutes is the standard first-aid protocol.

10How should a small puncture wound caused by a timber splinter be managed in the workshop to prevent infection?

A.Ignore it, as wood splinters are naturally sterile

B.Clean the area, remove the splinter with sterile tweezers, apply antiseptic, and cover with a plaster

C.Burn the skin with a match to sterilize the wound

D.Pour paint thinner over the wound to dissolve the splinter

Explanation: Wood splinters can carry bacteria and fungi, leading to infections or tetanus. Removing the splinter cleanly, washing the wound, applying antiseptic, and covering it prevents contamination and promotes healing.

About the CTVET Ghana Certificate II — Carpentry Exam

The CTVET Ghana Certificate II in Carpentry certification validates the core theoretical knowledge and practical competence of candidates in carpentry, timber construction, joinery, and workshop management. The curriculum covers safety standards (under the Ghana Factories, Offices and Shops Act, 1970 - Act 328), tool care and maintenance, identification and selection of local West African wood species (such as Odum/Iroko, Wawa, Mahogany, Ofram), structural rough carpentry (including roofing systems, formwork, scaffolding), interior and exterior finishes (joints construction, doors and windows fitments), and sustainable waste utilization. The examination includes a 2-hour theory paper (combining objectives and essays) and a hands-on practical exam.

Questions

50 scored questions

Time Limit

2 hours

Passing Score

Grade C6 (50% or above) on the CTVET grading scale

Exam Fee

GHS 200 - GHS 500 (varies by center) (Commission for Technical and Vocational Education and Training (CTVET), Ghana)

CTVET Ghana Certificate II — Carpentry Exam Content Outline

15%

Workshop Safety & Standards

Ghana Factories Act, 1970 (Act 328) compliance, workshop organization, first aid protocols for woodshop accidents, proper selection and use of personal protective equipment (respirators for wood dust, steel-toe boots), handling fire risks (Class A timber fires), and safe chemical storage for finishes and preservatives.

10%

Tools & Equipment Maintenance

Selection, safety, and maintenance of carpentry hand tools (rip saws, tenon saws, jack planes, wood chisels) and power machinery (radial arm saws, band saws, routers, thicknessers). Sharpening angles for chisels and plane irons, blade replacement procedures, and machine guard usage.

25%

Woodworking Materials

Biological and physical properties of local West African timbers (Odum, Wawa, Mahogany, Emery, Ofram). Timber seasoning methods (air vs. kiln drying), checking moisture content, wood defects (warping, shakes, knots), timber preservation methods (pressure treatment, brushing, chemical preservatives against termites), and manufactured boards (MDF, plywood, blockboard).

25%

Rough Carpentry & Framing

Timber framing construction, components of traditional roofs (rafters, purlins, wall plates, ridge boards, king posts), ceiling joists layout, scaffolding erection and safety, formwork design and bracing for concrete beams, columns, and slabs, timber volume calculations, and measuring accuracy.

15%

Carpentry Finishes & Joinery

Marking, cutting, and assembling woodwork joints (mortise and tenon, bridle, dovetail, housing, halving). Fitting doors and window frames, installing locks, hinges, and architraves, cabinet assembly, sanding, and applying finishing coats (varnish, lacquer, wax, paint).

10%

Waste Utilization & Innovation

Material optimization and nesting plans to minimize off-cuts, recycling timber waste into smaller products (stools, storage boxes), proper disposal of toxic waste (solvents, preservatives), workshop dust extraction systems, and cleanup habits.

How to Pass the CTVET Ghana Certificate II — Carpentry Exam

What You Need to Know

Passing score: Grade C6 (50% or above) on the CTVET grading scale
Exam length: 50 questions
Time limit: 2 hours
Exam fee: GHS 200 - GHS 500 (varies by center)

Keys to Passing

Complete 500+ practice questions
Score 80%+ consistently before scheduling
Focus on highest-weighted sections
Use our AI tutor for tough concepts

CTVET Ghana Certificate II — Carpentry Study Tips from Top Performers

1Memorize the structural components of a roof truss (rafter, purlin, tie beam, king post, strut, wall plate) and know their primary functions.

2Understand the difference between hardwood and softwood species and the common seasoning defects such as cupping, bowing, twisting, and splits.

3Review chisel and plane iron sharpening: the bevel angle is typically 25 degrees, and the honing angle is 30 degrees.

4Study the safety guidelines in the Factories, Offices and Shops Act, 1970 (Act 328), specifically rules regarding dust ventilation, machine guards, and fire safety.

Frequently Asked Questions

What is the passing grade for the CTVET Carpentry Certificate II?

Under the standard CTVET competency-based grading system, candidates must achieve at least a Grade C6 (50% or above) in both the theory and practical examinations to pass the module and receive their national certificate.

What components are tested in the CTVET Carpentry exam?

The exam is divided into two primary assessments: a written theory paper (which includes multiple-choice objective questions and theoretical essay/calculation questions) and a practical assessment where candidates construct a specific woodwork piece (such as a roof truss joints assembly or door frame) from given working drawings.

Which local wood species are emphasized in the Ghanaian syllabus?

The syllabus focuses on West African wood species used in local construction. These include Odum (Iroko) for heavy structural work and outdoor durability, Mahogany for high-end cabinetry, and Wawa for light furniture and interior boards, along with training on seasoning and preservation against local pests like termites.

How long is the written theory examination?

The official theory paper (Paper 1 and Paper 2 combined) is typically 2 hours in duration, testing safety, materials, tools, calculations, and drawing interpretation.