100+ Free High Risk Work Licence — Forklift Truck (LF) Practice Questions
Pass your Australia High Risk Work Licence — Forklift Truck (LF) Assessment exam on the first try — instant access, no signup required.
Loading practice questions...
Explore More Australia High Risk Work Licensing
Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.
Key Facts: High Risk Work Licence — Forklift Truck (LF) Exam
100
Practice Questions
OpenExamPrep
NAI
Closed / unpublished
Safe Work / regulators
Must-pass
Calcs (typical RTO practice)
RTO/assessor practice
5 yrs
Licence Validity
WHS Regulators
The Australia HRWL Forklift Truck (LF) pathway uses a closed-book NAI knowledge and calculation assessment plus practical for TLILIC0003. Critical calculations and safety items are commonly treated as must-pass. This prep includes 100 practice questions.
Sample High Risk Work Licence — Forklift Truck (LF) Practice Questions
Try these sample questions to test your High Risk Work Licence — Forklift Truck (LF) exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.
1Under Australian WHS law, what is a forklift operator's primary duty of care while performing high-risk work?
2Which High Risk Work Licence class is required to operate a standard mast forklift truck (not an order picker) in Australia?
3What national unit of competency underpins the LF forklift High Risk Work Licence assessment?
4According to the TLILIC0003 definition, when is a powered industrial truck treated as a forklift truck requiring an LF licence?
5How long is an Australian High Risk Work Licence, including LF, typically valid before renewal is required?
6Before starting a forklift task, what should you confirm from the work order or equivalent briefing?
7In WHS terms, what is the difference between a hazard and a risk when planning forklift work?
8Which workplace traffic hazard is especially critical to control when operating a forklift in a warehouse?
9What should you do if you identify overhead powerlines or service pipes on the planned forklift path?
10Minimum age commonly required to be assessed for an LF High Risk Work Licence in Australia is:
About the High Risk Work Licence — Forklift Truck (LF) Exam
The High Risk Work Licence for Forklift Truck (LF class) is required in Australia to operate a powered industrial truck with a mast and elevating load carriage fitted with fork arms or other attachments that can be raised 900 mm or more, excluding pedestrian-operated trucks, pallet trucks, and order-picking forklifts (LO class). Assessment is based on the national unit of competency TLILIC0003 — Licence to operate a forklift truck. It covers planning the task, hazard identification, pre-start checks, stability and load-centre calculations, safe load shifting, traffic and pedestrian controls, and shut-down procedures under Model WHS Regulations Part 4.5.
Assessment
Closed-book National Assessment Instrument (NAI) knowledge and calculations assessment, plus a practical forklift operation assessment, administered by an accredited high-risk work assessor through a Registered Training Organisation (RTO).
Time Limit
Varies by RTO / assessor (closed-book knowledge and calculations, then practical)
Passing Score
Competency-based overall. Candidates are commonly required to answer calculations and safety-critical theory correctly and must demonstrate competent practical operation; exact marking rules sit in the closed NAI.
Exam Fee
RTO training and assessment fees commonly fall roughly in the $350–$650 AUD range depending on provider and duration, plus a separate regulator HRWL application fee (e.g. SafeWork NSW 2026–27: $95 per class for a new licence; renewal and other states/territories differ—check your regulator). (State and Territory Work Health and Safety (WHS) regulators (e.g., SafeWork NSW, WorkSafe Victoria, WorkSafe Queensland).)
High Risk Work Licence — Forklift Truck (LF) Exam Content Outline
Plan Work & Hazard Identification
Task planning from work orders, site inspection, WHS duties, hierarchy of control, SWMS/risk assessment, traffic and pedestrian hazards, overhead and ground conditions, weather, and communication.
Pre-Start Inspection & Preparation
Data plate and logbook checks, structural and safety-device inspections, fluid/fuel/battery checks, tagging out defects, selecting attachments, and confirming site controls.
Stability, Capacity & Calculations
Stability triangle, centre of gravity, load centre distance, rated capacity from the data plate, derating for longer load centres or attachments, and safe load placement.
Operate & Shut Down
Safe travel with forks low and mast tilted back, ramps and slopes (no turning on grades), stacking/unstacking, pedestrian awareness, tip-over response, emergency stops, parking, isolation, and post-operational checks.
How to Pass the High Risk Work Licence — Forklift Truck (LF) Exam
What You Need to Know
- Passing score: Competency-based overall. Candidates are commonly required to answer calculations and safety-critical theory correctly and must demonstrate competent practical operation; exact marking rules sit in the closed NAI.
- Assessment: Closed-book National Assessment Instrument (NAI) knowledge and calculations assessment, plus a practical forklift operation assessment, administered by an accredited high-risk work assessor through a Registered Training Organisation (RTO).
- Time limit: Varies by RTO / assessor (closed-book knowledge and calculations, then practical)
- Exam fee: RTO training and assessment fees commonly fall roughly in the $350–$650 AUD range depending on provider and duration, plus a separate regulator HRWL application fee (e.g. SafeWork NSW 2026–27: $95 per class for a new licence; renewal and other states/territories differ—check your regulator).
Keys to Passing
- Complete 500+ practice questions
- Score 80%+ consistently before scheduling
- Focus on highest-weighted sections
- Use our AI tutor for tough concepts
High Risk Work Licence — Forklift Truck (LF) Study Tips from Top Performers
Frequently Asked Questions
What is the difference between LF and LO forklift licences?
LF (Forklift truck) covers a counterbalance or similar forklift with a mast and elevating carriage where the operator does not elevate with the load. LO (Order-picking forklift truck) is required when the operator's controls are incorporated with, and elevate with, the load carriage. An LF licence does not authorise LO work.
How long is an LF High Risk Work Licence valid?
Australian High Risk Work Licences, including LF, are valid for 5 years and are recognised nationally. You must renew with your state or territory regulator before expiry (renewal windows commonly extend up to 12 months after expiry, after which full re-assessment may be required).
What does the TLILIC0003 assessment include?
You complete training with an RTO, then an accredited assessor delivers the closed-book National Assessment Instrument covering knowledge and calculations, plus a practical forklift operation assessment. Passing competence in the unit alone does not issue the licence—you must apply to your state WHS regulator (often within 60 days of assessment) for the LF class HRWL.
What happens if I fail the calculations component?
Calculations and safety-critical items are commonly treated as must-pass competency by assessors. If you are not yet competent on calculations or practical, you will need re-assessment for the failed component under your RTO’s reassessment policy. Exact NAI scoring rules are not publicly released.