All Practice Exams

Free Practice Questions for DHA Dentist Exam

Exam-style questions and explanations by OpenExamPrep.

โœ“ No registrationโœ“ No credit card
100+ Questions
100% Free

Loading practice questions...

Sample DHA Dentist Exam Practice Questions

Try these sample questions to review concepts for the DHA Dentist Exam exam. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1A patient needs a Class II composite restoration on tooth 36 (FDI). To control polymerization shrinkage stress in the proximal box, which placement technique is most appropriate?
A.Incremental placement in oblique layers no thicker than 2 mm each
B.Bulk placement of a single 5 mm increment cured for 40 seconds
C.Placing the entire restoration with a flowable composite only
D.Curing each increment for 5 seconds to reduce stress
Explanation: Incremental layering with increments no thicker than 2 mm allows adequate light penetration and reduces the configuration (C-) factor and cumulative shrinkage stress at the gingival margin. This minimizes cuspal deflection and marginal gaps in conventional (non-bulk-fill) composites.
2Which dental amalgam property is most directly improved by using a high-copper (>6%) alloy compared with a conventional low-copper alloy?
A.Reduced setting time
B.Increased thermal conductivity
C.Elimination of the weak gamma-2 (tin-mercury) phase
D.Lower compressive strength
Explanation: High-copper amalgams largely eliminate the gamma-2 (Sn7-8Hg) phase, which is the weakest and most corrosion-prone component of set amalgam. Removing gamma-2 improves corrosion resistance, marginal integrity, and overall strength.
3When preparing a tooth for a full-coverage all-ceramic crown, what is the recommended minimum total occlusal convergence (taper) per wall to achieve adequate retention and resistance form?
A.About 2 to 6 degrees
B.About 15 to 20 degrees
C.About 25 to 30 degrees
D.About 40 degrees
Explanation: An axial wall taper of roughly 2-6 degrees per wall (about 6-12 degrees total convergence) provides optimal retention and resistance while still allowing the restoration to seat. Excessive taper dramatically reduces retention.
4A patient presents with generalized attrition and reduced occlusal vertical dimension from bruxism, requiring full-mouth rehabilitation. Before delivering definitive crowns, which step is most important to evaluate the proposed new vertical dimension?
A.Immediate cementation of definitive zirconia crowns
B.Permanent bonding without any provisional phase
C.Endodontic treatment of all posterior teeth
D.A trial period with a provisional restoration or occlusal splint at the new vertical dimension
Explanation: A reversible provisional/splint phase at the proposed occlusal vertical dimension lets the clinician confirm patient comfort, phonetics, esthetics, and muscle adaptation before committing to irreversible definitive restorations. This reduces the risk of TMD symptoms after rehabilitation.
5Which impression material is most appropriate for a final fixed-prosthodontic impression because of its excellent dimensional stability and high tear strength?
A.Irreversible hydrocolloid (alginate)
B.Polyvinyl siloxane (addition silicone)
C.Impression compound
D.Zinc oxide eugenol paste
Explanation: Polyvinyl siloxane (PVS/addition silicone) offers outstanding dimensional stability over time, high accuracy, and good tear strength, making it ideal for crown and bridge final impressions. Casts can be poured later without significant distortion.
6A complete-denture patient complains that the lower denture lifts when opening wide and speaking. The borders appear overextended in the retromylohyoid and distolingual regions. What is the most appropriate corrective action?
A.Adjust and reduce the overextended denture borders
B.Reline the entire denture with a hard reline material
C.Add denture adhesive and dismiss the patient
D.Remake the maxillary denture
Explanation: Overextended borders that engage moving muscle attachments dislodge a lower denture during function. Identifying and selectively reducing the overextended flanges restores border seal and stability without remaking the prosthesis.
7In removable partial denture design, a Kennedy Class I arch is best described as:
A.A single edentulous area not bounded by natural teeth, located posterior to remaining teeth
B.An edentulous area bounded anteriorly and posteriorly by natural teeth (tooth-supported)
C.Bilateral edentulous areas located posterior to the remaining natural teeth
D.A bilateral edentulous area anterior to the remaining natural teeth
Explanation: Kennedy Class I is a bilateral free-end (distal-extension) edentulous situation, with edentulous areas posterior to the remaining natural teeth on both sides. These are tissue-and-tooth supported and require stress-release design considerations.
8A 28-year-old needs a single implant to replace tooth 11 (maxillary central incisor). Cone-beam imaging shows a thin labial bone plate. Which factor most strongly influences long-term esthetic stability of the peri-implant gingival margin?
A.Use of the widest possible diameter implant
B.Immediate loading regardless of primary stability
C.Placing the implant platform 1 mm coronal to the adjacent CEJs
D.Maintaining an adequate buccal bone thickness (ideally about 2 mm)
Explanation: An intact buccal bone wall of roughly 2 mm supports the overlying soft tissue and prevents recession after remodeling, which is critical in the esthetic zone. Inadequate buccal bone predisposes to gingival recession and grey show-through.
9Which luting cement provides chemical adhesion to tooth structure and sustained fluoride release, making it useful for cementing metal crowns in caries-prone patients?
A.Zinc phosphate cement
B.Glass ionomer cement
C.Polycarboxylate without fluoride
D.Resin cement with no fluoride filler
Explanation: Glass ionomer cement bonds chemically to enamel and dentin via ion exchange and releases fluoride over time, providing some anticariogenic benefit. This makes it a good luting choice for caries-susceptible patients.
10During tooth preparation for a posterior all-ceramic (lithium disilicate) crown, what is the recommended minimum occlusal reduction to ensure adequate material thickness and fracture resistance?
A.0.3 mm
B.0.5 mm
C.1.5 to 2.0 mm
D.3.5 mm
Explanation: Lithium disilicate posterior crowns require roughly 1.5-2.0 mm of occlusal reduction to provide enough bulk of ceramic to resist occlusal fracture. Insufficient reduction is a leading cause of all-ceramic crown failure.

About the DHA Dentist Exam Exam

The DHA Dentist Licensing Assessment is the computer-based exam dentists must pass to practice in Dubai. DHA's CBT guideline lists the General Dentist exam (GEN5301) as 150 multiple-choice questions with a 3-hour duration that includes registration and the process introduction, delivered through Prometric and covering twelve published areas from anesthesia and pain management to ethics.

Exam sponsor: Dubai Health Authority (DHA). The requirements and fees below concern the certification or admission exam, separate from our free practice resources.

Assessment

150 multiple-choice questions delivered as a computer-based test through Prometric.

Time Limit

3 hours, including registration and the process introduction

Passing Score

60% (DHA CBT guideline, General Dentist GEN5301); results are calculated from the number of correct answers and the weighting of each domain, and only Pass or Fail is reported.

Exam / Certification Fees

USD 280 assessment fee for the General Dentist exam (GEN5301) in DHA's CBT guideline; confirm current fees on the DHA Sheryan portal.

Exam sponsor website

Fees, eligibility, and exam policies can change. Confirm them with the exam sponsor before applying or paying.

Our practice resources: topics covered

We aim to reflect publicly available exam outlines and topic information in our study resources. Coverage, format, and difficulty may differ from the actual exam, and we cannot guarantee that every detail is accurate or current. Confirm exam requirements, fees, and policies with the official exam sponsor.

No percentage weight published

Anesthesia and Pain Management

Listed in DHA's General Dentist (GEN5301) exam coverage.

No percentage weight published

Oral Medicine/Oral Surgery

Listed in DHA's General Dentist (GEN5301) exam coverage.

No percentage weight published

Periodontics

Listed in DHA's General Dentist (GEN5301) exam coverage.

No percentage weight published

Temporomandibular Joint

Listed in DHA's General Dentist (GEN5301) exam coverage.

No percentage weight published

Endodontics

Listed in DHA's General Dentist (GEN5301) exam coverage.

No percentage weight published

Implant Surgery

Listed in DHA's General Dentist (GEN5301) exam coverage.

No percentage weight published

Restorative Dentistry

Listed in DHA's General Dentist (GEN5301) exam coverage.

No percentage weight published

Orthodontics/Pediatric Dentistry

Listed in DHA's General Dentist (GEN5301) exam coverage.

No percentage weight published

Cosmetic

Listed in DHA's General Dentist (GEN5301) exam coverage.

No percentage weight published

Deformities and Orthognathic Surgery

Listed in DHA's General Dentist (GEN5301) exam coverage.

No percentage weight published

Patient Education

Listed in DHA's General Dentist (GEN5301) exam coverage.

No percentage weight published

Ethics

Listed in DHA's General Dentist (GEN5301) exam coverage.

Preparing for the DHA Dentist Exam Exam

What You Need to Know

  • Passing score: 60% (DHA CBT guideline, General Dentist GEN5301); results are calculated from the number of correct answers and the weighting of each domain, and only Pass or Fail is reported.
  • Assessment: 150 multiple-choice questions delivered as a computer-based test through Prometric.
  • Time limit: 3 hours, including registration and the process introduction
  • Exam / certification fees: USD 280 assessment fee for the General Dentist exam (GEN5301) in DHA's CBT guideline; confirm current fees on the DHA Sheryan portal. Official sources

Using Our Practice Resources

  • Work through all 100 available questions
  • Review every answer and explanation
  • Track weak areas and revisit them
  • Use our AI tutor for tough concepts

DHA Dentist Exam: Suggested Study Strategy

1Cover all twelve published coverage areas; DHA does not publish percentage weights, so let your practice results decide where extra time goes.
2Practice case-based MCQs that include history, examination findings and radiographs to build clinical decision-making.
3Review tooth-numbering systems and UAE-specific topics such as licensing rules, consent, confidentiality and infection control before test day.

Frequently Asked Questions

How many questions are on the DHA dentist exam and how long is it?

DHA's CBT guideline lists the General Dentist assessment (GEN5301) as 150 multiple-choice questions with a 3-hour duration that includes registration and the process introduction, delivered as a computer-based test through Prometric.

What is the passing score for the DHA dentist exam?

DHA's CBT guideline sets a 60% pass score for the General Dentist assessment (GEN5301). DHA calculates results from the number of correct answers and the weighting of each domain, and reports only Pass or Fail in Sheryan.

Who administers and conducts the DHA dentist licensing exam?

The exam is conducted by the Dubai Health Authority (DHA) and delivered by Prometric as a computer-based test. Eligibility and document verification are handled through the DHA Sheryan portal and DataFlow.

What subjects does the DHA dentist exam cover?

DHA's CBT guideline lists twelve coverage areas without percentage weights: anesthesia and pain management, oral medicine/oral surgery, periodontics, temporomandibular joint, endodontics, implant surgery, restorative dentistry, orthodontics/pediatric dentistry, cosmetic, deformities and orthognathic surgery, patient education, and ethics.