What is the physical definition of a Class 7 radioactive material under ADR Chapter 2.2.7?
Radiation Physics Protection
Question · Easy
Which type of ionizing radiation consists of heavy positively-charged helium nuclei with high ionizing power but low penetrating power easily stopped by a sheet of paper?
What type of shielding is most effective for stopping high-energy Beta (β) radiation while minimizing bremsstrahlung (x-ray emission)?
Question · Hard
What type of shielding material is required to attenuate Gamma (γ) radiation effectively?
What are the three fundamental cardinal principles of radiation protection used to minimize external dose to transport workers?
According to the Inverse Square Law for point-source radiation, if a driver doubles their distance from a radioactive package (e.g. moving from 1 metre to 2 metres), what happens to the radiation dose rate?
Question · Medium
What is the SI unit used to measure radioactive decay activity (disintegrations per second)?
What SI unit is used to express equivalent radiation dose and effective dose received by human tissue?
Under UK Ionising Radiations Regulations 2017 (IRR17) and ADR rules, what is the annual effective dose limit for an adult transport worker exposed to ionising radiation in the course of their work?
What does the ALARP / ALARA principle stand for in radiation safety?
What personal monitoring device must be worn by drivers carrying Class 7 radioactive materials if required by their Radiation Protection Adviser (RPA)?
What is the radioactive half-life of a radionuclide?
If a Cobalt-60 source has an initial activity of 80 GBq and its half-life is approximately 5.3 years, what will its activity be after 10.6 years (two half-lives)?
What is the difference between radioactive contamination and external radiation exposure?
What is an A1 or A2 value under ADR 2.2.7.2.2?
Package Categories Types
What defines 'Special Form' radioactive material under ADR 2.2.7.2.2.3?
Which Class 7 package category requires ONLY strong industrial packaging suitable for normal transport handling without needing to withstand accident test conditions?
What test criteria must a Type A package satisfy under ADR 6.4.7?
What accident condition tests must a Type B(U) package withstand under ADR 6.4.8?
What is the difference between a Type B(U) package and a Type B(M) package under ADR?
Under ADR Chapter 2.2.7, what does LSA stand for in Class 7 transport?
What does SCO stand for in Class 7 dangerous goods classification?
What radioactive package label category has a pure WHITE background, a single red vertical bar, and maximum surface dose rate of 0.005 mSv/h (5 μSv/h)?
What radioactive package label category has a YELLOW top half, a white bottom half, TWO red vertical bars, and a Transport Index (TI) between 0 and 1.0?
What package label category has THREE red vertical bars, a yellow upper half, and is required when the Transport Index (TI) exceeds 1.0 or the surface dose rate exceeds 0.5 mSv/h?
What is the maximum radiation dose rate permitted on the outer surface of a non-exclusive use Category III-YELLOW package under ADR 4.1.9.1.11?
Under what condition may a Category III-YELLOW package have a surface dose rate exceeding 2 mSv/h (up to a maximum of 10 mSv/h)?
What information must be written on a Category II-YELLOW or Category III-YELLOW package label under ADR 5.2.2.2.2?
What package type is required for transporting high-activity radioactive materials by commercial cargo aircraft under ADR / ICAO rules?
What mark must appear on the exterior of a Type A radioactive package under ADR 5.2.1.7.4?
How is the Transport Index (TI) of a single Class 7 package calculated under ADR 2.2.7.1.2?
Transport Index Placarding
If the maximum radiation level at 1 metre from the surface of a Type A package is measured as 15 μSv/h (0.015 mSv/h), what is the Transport Index (TI) of the package?
What is the Transport Index (TI) of a Category I-WHITE package?
Under ADR 7.5.11 CV33, what is the maximum total sum of Transport Indexes (TI) permitted on a single non-exclusive use transport unit?
What is the Criticality Safety Index (CSI) used for in Class 7 transport under ADR 2.2.7.1.3?
What is the maximum sum of Criticality Safety Indexes (CSI) allowed on a non-exclusive use vehicle carrying fissile packages under ADR 7.5.11 CV33?
What placard (Model No. 7D) must be affixed to the outer sides and rear of a vehicle carrying Category II or III radioactive packages under ADR 5.3.1.5?
What orange-plate requirement applies to a vehicle carrying Class 7 radioactive materials in packages under ADR 5.3.2?
What is the maximum radiation dose rate permitted in the driver's cab of a vehicle carrying Class 7 radioactive materials under ADR 7.5.11 CV33?
How can a driver achieve the required 0.005 mSv/h (5 μSv/h) cab radiation limit if high-TI Category III-YELLOW packages are loaded?
What restriction applies to stowing Class 7 radioactive packages near undeveloped photographic film or plates under ADR 7.5.11 CV33?
What segregation requirement applies between Class 7 radioactive packages and passengers / vehicle crew under ADR 7.5.11 CV33?
Under what condition is a transport unit carrying Class 7 goods considered to be operating under 'Exclusive Use'?
What is the maximum radiation level allowed at any point on the outer surface of a closed vehicle carrying Class 7 under Exclusive Use under ADR 7.5.11 CV33?
What is the maximum radiation dose rate allowed at a distance of 2 metres from the vertical outer surfaces of an Exclusive Use vehicle carrying Class 7 under ADR 7.5.11 CV33?
What is the Transport Index (TI) assigned to a package if the radiation dose rate at 1 metre is 0.04 mSv/h (40 μSv/h)?
Can packages bearing Category I-WHITE, Category II-YELLOW, and Category III-YELLOW labels be carried together on the same vehicle?
What document must state the Transport Index (TI) and Criticality Safety Index (CSI) for each Class 7 package?
Loading more…