Under the ADR classification system for Class 1 explosives, what characterizes a Division 1.1 explosive?
Hazard Divisions Compatibility
Question · Easy
Which Class 1 hazard division is assigned to articles that present a projection hazard but NOT a mass explosion hazard?
Commercial fireworks such as consumer sparklers or small Roman candles packed for retail are typically classified under which Division?
Question · Medium
What does Compatibility Group A designate in Class 1 dangerous goods classification?
Question · Hard
Why is Compatibility Group S unique compared to all other compatibility groups in Class 1?
What is the primary difference between Division 1.5 and Division 1.1 explosives?
A package is labelled with Hazard Label 1.3G. What does the letter G signify?
Which Compatibility Group is assigned to detonators and detonator assemblies for blasting?
What is the classification code for black powder (gunpowder) when packaged in granular form?
Division 1.6 comprises extremely insensitive articles which do not have a mass explosion hazard. What is required for an item to be assigned to 1.6?
What is the meaning of Compatibility Group L in Class 1 explosive transport?
Which hazard label model must be affixed to packages containing Division 1.2 explosives?
What is the significance of the Net Explosive Mass (NEM) or Net Explosive Content (NEC) on transport documentation?
If a vehicle carries a mixed load containing both Division 1.1D (100 kg NEM) and Division 1.3G (300 kg NEM), how is the overall hazard division of the vehicle treated under ADR load rules?
Compatibility Group C consists of propellant explosives. Which of the following is an example of a Group C explosive?
What is Compatibility Group D in Class 1 classification?
Which Compatibility Group applies to an article containing a secondary detonating explosive substance WITHOUT its own means of initiation, BUT WITH a propelling charge?
What distinguishes Compatibility Group F from Compatibility Group E?
Which of the following UN numbers represents ANFO (Ammonium Nitrate / Fuel Oil) blasting explosive (Explosive, blasting, type B)?
Under ADR 2.2.1.1.5, what does the term 'deflagration' mean in relation to Class 1 substances?
Which of the following UN numbers designates shaped charges for oil well casing perforation without detonator?
What is the hazard label requirement for transport units carrying Division 1.4, Compatibility Group S packages?
Which Compatibility Group is assigned to articles containing an explosive substance AND white phosphorus (toxic/pyrophoric)?
Which Compatibility Group is assigned to articles containing an explosive substance AND a flammable liquid or gel?
Which Compatibility Group is assigned to articles containing an explosive substance AND a toxic chemical agent?
What is the meaning of Compatibility Group N?
Under ADR 2.2.1.1.1, how many hazard divisions exist within Class 1?
How many Compatibility Group letters exist under ADR Class 1 classification?
Why must detonators (Group B) NEVER be carried in the same compartment as secondary blasting explosives (Group D) without an approved partition or special container?
Under what condition may UN 0336 (Fireworks 1.4G) and UN 0335 (Fireworks 1.3G) be loaded together on the same vehicle?
Under ADR Chapter 9.2, what defines an EX/II vehicle used for carrying Class 1 explosives?
Ex Vehicle Standards
What structural body requirement applies to an EX/III vehicle under ADR Chapter 9.3?
Where must the engine of an EX/II or EX/III vehicle be located relative to the load compartment under ADR 9.2.4?
What requirement applies to the exhaust system of an EX/II or EX/III vehicle carrying Class 1 dangerous goods?
What electrical installation requirement must be met by all wiring located behind the driver's cab on an EX/III vehicle?
What is the function of the battery master switch required on EX/III vehicles?
What rating of electrical protection (IP rating) is required for electrical equipment inside the load compartment of an EX/III vehicle?
Can an auxiliary combustion heater (fuel-burning heater) be operated inside the load compartment of an EX/II or EX/III vehicle while carrying explosives?
What type of braking system is mandatory on EX/III motor vehicles with a maximum mass exceeding 3.5 tonnes under ADR 9.2.3?
How must the interior walls and floor of an EX/II or EX/III vehicle be maintained before loading Class 1 explosives?
What document certifies that a vehicle meets the structural and safety requirements for an EX/II or EX/III explosive transport vehicle under ADR?
How long is an ADR Certificate of Approval for an EX/II or EX/III vehicle valid before requiring re-inspection?
On an EX/II sheeted vehicle carrying Class 1 packages, what property must the tarpaulin sheet possess under ADR 9.3.3?
What type of fuel is prohibited for use in the engine of an EX/II or EX/III vehicle carrying Class 1 explosives?
What requirement applies to the fuel tank of an EX/II or EX/III vehicle under ADR 9.2.4.4?
Must an EX/II or EX/III vehicle carrying Class 1 explosives carry portable fire extinguishers, and if so, what size?
What is the total minimum dry-powder fire extinguisher capacity required for an EX/III articulated transport unit over 7.5 tonnes carrying Class 1 explosives?
May an EX/II or EX/III vehicle draw a trailer while carrying Class 1 explosives?
Loading more…