Evaluate ∫₀¹ (4x³ − 2x) dx.
Mathematics Statistics
Question · Easy
Every level, the water flows faster
Short
For matrix A = [[2, 1], [0, 3]], what is det(A)?
A process yield sample (n = 5) is 78, 80, 82, 84, 86%. Sample mean and sample standard deviation (n−1) are:
Question · Medium
Engineering Exam Prep Podcast
Listen on Spotify
Podcast
If Laplace transform L{f} = 1/(s+2), then f(t) for t ≥ 0 is:
In the reaction Zn + Cu²⁺ → Zn²⁺ + Cu, zinc is:
Chemistry
For a weak acid HA with Ka = 1.0×10⁻⁵ and C = 0.10 M, approximate [H⁺] is:
The pH of 0.010 M strong acid HCl (complete dissociation) is:
At equilibrium for N₂ + 3H₂ ⇌ 2NH₃, increasing pressure at constant T (ideal gases) shifts equilibrium:
Oxidation number of Cr in Cr₂O₇²⁻ is:
A 50 N force acts at 30° to the horizontal. The horizontal component is:
Engineering Mechanics
A 2 kg particle moving at 4 m/s is stopped by a constant force in 0.5 s. Impulse magnitude equals change in momentum:
Work done by a constant 20 N force displacing an object 3 m in the force direction is:
A steel rod (E = 200 GPa) of area 500 mm² carries 100 kN axial tension. Axial stress is:
Strength Of Materials
For axial stress 200 MPa with E = 200 GPa, elastic axial strain is:
Maximum bending stress σ = My/I. For the same M and section, larger section modulus I/y_max means:
A steady process has one inlet stream at 100 kg/h and two outlets at 40 kg/h and W kg/h. No accumulation or generation. W is:
Material Energy Balances
Fresh feed F = 100 mol/h of pure A; recycle R returns unconverted A. Overall conversion based on fresh feed is 80%; single-pass conversion is 40%. Recycle R is:
Question · Hard
Bypass fraction β of feed F skips a unit; the unit processes (1−β)F. Increasing β primarily:
Complete combustion of 1 mol C₃H₈ with theoretical O₂ requires how many moles of O₂? (C₃H₈ + 5O₂ → 3CO₂ + 4H₂O)
For the propane reaction above with 20% excess air, moles O₂ supplied per mol C₃H₈ are:
Steady energy balance (no KE/PE change, no work): if a stream is heated from 25°C to 75°C with Cp = 2 kJ/(kg·K) at ṁ = 3 kg/s, heat duty is approximately:
In a control volume at steady state, accumulation is zero. For a component with generation G and consumption C, the balance is:
First law for a closed system with no KE/PE change: ΔU = Q − W (W by system). If Q = 100 kJ and W = 40 kJ, ΔU is:
Chemical Engineering Thermodynamics
For an ideal gas isothermal process, ΔU is:
Raoult’s law for ideal liquid–vapor equilibrium states for species i:
At chemical equilibrium for a gas-phase reaction, the thermodynamic criterion (constant T, P) is:
Heat of reaction ΔHr is negative for an exothermic reaction. Increasing temperature for an exothermic equilibrium reaction typically:
For water vapor at low pressure, treating steam as ideal gas is often acceptable because:
Bernoulli equation along a streamline (steady, incompressible, frictionless) equates:
Fluid Dynamics
Reynolds number Re = ρvD/μ for pipe flow. Laminar flow typically occurs when:
Darcy–Weisbach head loss hf = f (L/D) (v²/2g). Doubling velocity (same f, L, D) multiplies hf by:
A centrifugal pump raises liquid pressure; pump head Hp relates to pressure rise roughly as:
Ergun equation estimates pressure drop through packed beds. At low Re (laminar-like packing flow), ΔP is dominated by:
Orifice meter flow rate for incompressible fluid scales approximately with:
NPSH available must exceed NPSH required to avoid pump cavitation. NPSHa increases when:
For Newtonian fluids, shear stress τ = μ (du/dy). Non-Newtonian pseudoplastic fluids show:
Fourier’s law for conduction: q = −k A dT/dx. Doubling thickness L for same ΔT and k halves heat rate because:
Heat Transfer
For a counterflow exchanger, LMTD = [(ΔT1 − ΔT2)/ln(ΔT1/ΔT2)]. If ΔT1 = 40°C and ΔT2 = 20°C, LMTD is:
Overall heat transfer coefficient U for a clean exchanger combines film coefficients. Fouling:
NTU method: NTU = UA/(ṁCp)_min. For a given effectiveness chart family, larger NTU generally means:
Natural (free) convection buoyancy is characterized by Grashof number Gr. Forced convection dominance is suggested when:
Blackbody emissive power E_b = σT⁴. Doubling absolute temperature multiplies E_b by:
Shell-and-tube exchangers often use baffles primarily to:
For condensers, heat transfer is enhanced by latent heat release. Condensing film coefficient is typically:
Q = UA ΔT_lm. If U and ΔT_lm fixed, doubling area doubles duty. This linear scaling assumes:
Critical insulation radius for a cylinder r_cr = k_ins/h_o. Adding insulation with outer radius below r_cr can:
Loading more…