Which New Zealand Act is the primary legislation governing workplace health, safety, and crane operations?
Workplace Health Safety
Question · Easy
Under the NZ Health and Safety at Work Act 2015, what does the acronym 'PCBU' stand for?
What is the primary purpose of conducting a Job Safety Analysis (JSA) before starting crane operations?
Trades Exam Prep Podcast
Listen on Spotify
Podcast
According to WorkSafe New Zealand guidelines, who is ultimately responsible for ensuring that a crane operator is competent?
Which official document contains the standard hand signals and safe practices for crane operations in New Zealand?
What colour high-visibility garments are standard and approved for general construction and crane sites in New Zealand?
In the New Zealand crane industry, what is the definition and role of a 'Dogman'?
Directing Communications
What does the abbreviation 'WLL' stamped on rigging and lifting gear stand for?
Rigging Slinging
Which type of crane is permanently mounted on a commercial truck chassis and primarily used to load and unload cargo onto its own deck?
Crane Types Components
What is the definition and primary purpose of a crane operator's pre-start check?
What action must be taken immediately if a crack is discovered in a hook block during a pre-start check?
What is the main function of outriggers when deployed on a mobile hydraulic crane?
In New Zealand crane hand signaling, how is the 'Stop' signal indicated?
What material is commonly used to manufacture lightweight synthetic webbing slings?
In a crane load chart, what does the term 'radius' refer to?
Crane Stability Charts
What is the correct storage method for synthetic webbing slings when they are not in use?
When attaching a shackle to a crane's lifting hook, what is the correct orientation?
What is the primary function of a tag line attached to a suspended crane load?
What information does a boom angle indicator provide to the crane operator?
What is the standard minimum safety distance that a crane must maintain from overhead power lines in NZ without written consent?
What is a 'blind lift' in crane operations?
Which type of shackle is most appropriate for long-term or permanent installations where the load may rotate?
Under New Zealand standards, how often must lifting tackle (slings and shackles) be inspected and certified by a competent person?
What type of crane is commonly found in workshops, running along elevated runway beams fixed to the building structure?
What is the primary danger of operating a mobile crane in high wind conditions?
What should a worker do first if they witness a mobile crane's boom contact an overhead power line?
What is a 'toolbox talk' in the context of site safety?
What is the definition of the term 'SWL' which is marked on older lifting equipment?
What is the safety function of a safety latch fitted to a crane hook?
According to the NZ Approved Code of Practice, what must be done if a crane signalman (dogman) must leave the operator's view?
Under the New Zealand Health and Safety at Work Act 2015, which of the following is defined as a 'Notifiable Event'?
Question · Medium
Under NZ safety regulations, what is the correct hierarchy of hazard controls to implement?
Who is legally permitted to perform dogman duties and sling loads for a crane lift on a construction site in New Zealand?
What does the 'gross capacity' value listed in a crane's load chart represent?
How does 'boom deflection' affect the operating radius of a mobile crane during a heavy lift?
What is the design safety factor typically applied to the breaking strength of general-purpose synthetic webbing slings?
Which grade of steel chain is approved and rated for overhead lifting applications?
Why is it strictly prohibited to replace a lost shackle pin with a standard commercial bolt?
What is the effect on a sling's load-carrying capacity when it is rigged in a choke hitch?
How does increasing the number of parts of line (reeving) in a crane's hook block affect lifting performance?
What is the primary engineering reason for using outrigger pads or timber packing (cribbing) under mobile crane outrigger feet?
Calculate the ground bearing pressure if a crane outrigger foot exerts a force of 150 kN onto a square timber pad that measures 1.5 metres by 1.5 metres.
Under the New Zealand Crane Safety Manual, when is a lift typically classified as a 'critical lift'?
What does 'boom length' represent on a telescopic mobile crane load chart?
Under NZ radio communication protocols, what does the 'continuous talk' (or active signal) rule mean for a dogman?
What is the stability risk of setting up a crane and performing lifts with outriggers only partially extended without using the specific partial-outrigger load chart?
What is the main function of a Load Moment Indicator (LMI) installed on a modern crane?
Loading more…