Which official NSPS CST Level II exam format is described in the July 2024 Program Book?
Nsps Cst Program
Question · Easy
A candidate has no college transcript hours. What minimum experience route matches the official Level II eligibility path?
For the education-based Level II eligibility route, which combination best matches the official requirement?
Engineering Exam Prep Podcast
Listen on Spotify
Podcast
Why does this practice set include both Field and Office topics for one Level II exam ID?
A leveling crew reads a backsight of 5.42 ft on BM A, elevation 812.35 ft. The foresight to TP1 is 3.18 ft. What is the elevation of TP1?
Field Equipment Operations
During instrument setup, what is the best reason to center the total station over the occupied point before carefully leveling it?
Which field note entry is most useful for later office reduction of a side shot collected with a total station?
What does a data collector point code such as EP, FL, or BLDG usually support?
A prism pole bubble is out of adjustment. What error is most directly introduced when side shots are taken with the pole apparently plumb?
In a construction stake marked "C 1.25", what does the notation usually tell the grading crew?
Which survey type most commonly retraces record lines, monuments, and evidence to express parcel limits?
Survey Types History
What does PLSS stand for in U.S. surveying practice?
Which document is most likely to contain bearing-distance calls for a metes and bounds parcel?
Which drawing view is most useful for reading proposed vertical grades along a roadway centerline?
Office Operations Plan Reading
On a plan sheet, what is the primary purpose of a scale such as 1 inch = 40 feet?
Which CAD practice best helps keep survey linework, points, contours, and annotation manageable?
Which statement best describes a GIS attribute table associated with surveyed features?
What is the safest first action when a crew arrives to work along an active roadway shoulder?
First Aid Safety
Which item is most appropriate personal protective equipment for a rod person working near construction traffic?
A crew member sees a coworker collapse and become unresponsive. What is the best immediate response?
What is the ethical response if a technician notices that field evidence conflicts with the expected boundary location?
Principles Profession
Why should original field observations be preserved even after coordinates have been computed?
Which is the best description of a benchmark in leveling work?
Survey Control
In GNSS work, why is poor satellite geometry a concern even when many satellites are visible?
What is the main purpose of taking a backsight when beginning a total station setup?
Which unit conversion is correct?
Survey Computations
What is the horizontal distance for a slope distance of 100.00 ft observed at a vertical angle of 0 degrees?
A line has a northing difference of +30.00 ft and an easting difference of +40.00 ft. What is its horizontal length?
Which angular relationship is used to check the interior angles of a closed five-sided traverse?
Which observation is most directly used to determine elevation difference in ordinary differential leveling?
A closed level loop starts on a benchmark elevation 500.000 ft and closes on the same benchmark at 500.048 ft. What is the loop misclosure?
Question · Medium
A total station measures a slope distance of 250.00 ft with a vertical angle of +3 degrees from horizontal. Which expression gives the horizontal distance?
A traverse course is 200.00 ft long on a bearing of N 30 degrees E. What are the approximate latitude and departure?
A four-sided traverse has measured interior angles of 89 degrees 59 minutes 40 seconds, 90 degrees 00 minutes 20 seconds, 90 degrees 00 minutes 10 seconds, and 90 degrees 00 minutes 10 seconds. What is the angular misclosure?
For a closed traverse with small random distance and angle errors, what is the common purpose of applying a compass rule adjustment?
A crew observes direct and reverse angles with a total station. What error source is this procedure intended to reduce?
When checking a total station EDM against a known baseline, which result most strongly indicates a scale problem rather than a simple pointing blunder?
A prism constant is set to 0 mm in the instrument, but the prism being used requires -30 mm. What is the likely effect if not corrected?
A data collector warns that the backsight check differs by 0.08 ft horizontally from known control. What is the best Level II technician response?
A GNSS rover stores ellipsoid height, but the project requires elevations on an orthometric datum. What additional information is normally needed?
Which situation is most likely to cause GNSS multipath?
In RTK GNSS surveying, what is the practical purpose of initializing or obtaining a fixed solution before collecting precision points?
A level line has backsights totaling 17.36 ft and foresights totaling 14.91 ft from a benchmark elevation of 220.50 ft. What is the final elevation?
Why should backsight and foresight distances be approximately balanced in precise leveling?
A rectangular lot measures 125.00 ft by 80.00 ft. What is its area in acres?
Using coordinate geometry, what is the area of a triangle with coordinates A(0,0), B(100,0), and C(100,50)?
A line from point A(1000.00, 1000.00) to point B(1075.00, 1100.00) is expressed as northing,easting. What are the latitude and departure from A to B?
Loading more…