For the North Carolina Class A CDL combination vehicles test, what is a combination vehicle?
Combination Vehicle Basics
Question · Easy
POV: the turn is tighter than it looks
Short
For combination-vehicle safety, which of the following is the most common combination vehicle on U.S. highways?
What does GCWR stand for?
Under North Carolina and FMCSA CDL class rules, a Class A combination generally has GCWR of at least 26,001 pounds and a towed unit with GVWR over:
Weights And Classifications
On the North Carolina CDL combination test, what is off-tracking?
Driving Safely
On a North Carolina CDL road scenario, you are making a right turn in a tractor-semi-trailer at a city intersection. Because of off-tracking, you should:
For a North Carolina CDL combination vehicle, when making a left turn in a combination vehicle, you should:
Compared to a straight truck, a combination vehicle's steering response is:
On the North Carolina CDL combination test, what is a jackknife?
If you start to feel the trailer skidding and swinging out behind you, what is the correct response?
For combination-vehicle safety, why are empty trailers more prone to brake lock-up than loaded trailers?
Stopping distance for a combination vehicle is:
On a wet, slippery road in a combination vehicle, you should:
On the North Carolina CDL combination test, what is the kingpin?
Coupling
In North Carolina CDL combination procedures, before backing under a trailer, the locking jaws on the fifth wheel must be:
Which sequence best matches the N.C. CDL Manual procedure for coupling a tractor-semitrailer?
How do you perform the tug test after coupling?
In North Carolina CDL combination procedures, after the tug test, you should also:
There is a visible gap between the trailer apron and the fifth wheel after coupling. What does this likely mean?
What color glad-hand is used for the emergency (supply) line?
Air Brakes
What color glad-hand is used for the service line?
What happens if the emergency and service glad-hands are cross-connected?
The red 8-sided 'Trailer Air Supply' knob on the dash is:
For a North Carolina CDL combination vehicle, when should you use the trailer hand valve (trolley valve)?
The trailer hand valve must NEVER be used:
What does the tractor protection valve do?
How do you test the trailer service brakes after coupling?
In which gear should the tractor be when backing under a trailer?
In North Carolina CDL combination procedures, before coupling, you should position the tractor:
For a North Carolina CDL combination vehicle, when inspecting the fifth wheel before coupling, you should check for:
On the North Carolina CDL combination test, what is the correct height of the trailer before backing under with the tractor?
Question · Medium
On the North Carolina CDL combination test, what is the correct order to disconnect the air lines and electrical cord when uncoupling?
Uncoupling
In North Carolina CDL combination procedures, before pulling the tractor out from under a trailer during uncoupling, you must:
On the North Carolina CDL combination test, what is the proper sequence for uncoupling?
For a North Carolina CDL combination vehicle, when backing a tractor-trailer in a straight line, the steering wheel should be:
Backing
To swing the trailer to the LEFT while backing, you should turn the steering wheel:
For a North Carolina CDL combination vehicle, when backing a combination vehicle, you should:
Under NCDMV Class A rules, a combination vehicle generally qualifies as Commercial Class A when GCWR is at least 26,001 pounds and the towed vehicle or vehicles exceed what GVWR?
Which federal rule is most directly tied to passing the North Carolina CDL Combination Vehicles knowledge test?
North Carolina Cdl
A sliding fifth wheel allows you to:
Weight Distribution
Sliding the trailer tandems FORWARD shifts more weight to:
Too little weight on the drive axles can cause:
Combination vehicles are more likely than straight trucks to roll over because:
On the North Carolina CDL combination test, what is the most common cause of truck rollovers in turns?
For a North Carolina CDL combination vehicle, when you connect a glad-hand to the trailer, you should:
During pre-trip, you find the glad-hand seals are dry, cracked, and worn. You should:
Inspection
During pre-trip, you should inspect the landing gear for:
Loading more…