In the Massachusetts CDL manual's school bus section, what is the danger zone?
Danger Zones And Mirrors
Question · Easy
How far can the school bus danger zone extend in front of the front bumper?
How far does the danger zone extend from the left side, right side, and rear of the school bus?
Why is the left side of a school bus always considered dangerous?
When should a Massachusetts school bus driver check each mirror for maximum viewing area?
What should properly adjusted outside flat mirrors show?
What are outside convex mirrors mainly used to monitor?
What are crossover mirrors designed to help a school bus driver see?
Which mirror is primarily used to monitor passenger activity inside the school bus?
What is the safest reason to use a logical sequence when checking school bus mirrors?
When approaching an approved school bus stop, what should the driver do first?
Loading And Unloading
If the bus is equipped with amber warning lights, when should they generally be activated before a stop?
Where should the front bumper be positioned when stopping to load students?
At each student stop, what should the driver do with the transmission and parking brake?
When should the driver activate alternating flashing red lights and ensure the stop arm is extended?
During loading, when should students board the school bus?
What should students do while boarding the school bus?
When loading in the dark, what interior equipment should be used to help students board safely?
Before moving after students board, what must the driver confirm?
If a student outside the bus cannot be accounted for after loading, what should the driver do?
During route unloading, when should students leave their seats?
After unloading on a route, where should students walk from the side of the bus?
If a student's unloading stop was missed, what does Section 10 say the driver should not do?
What should students do if they drop an object near the bus during loading or unloading?
What is the main purpose of a post-trip walk-through after a route or activity trip?
School Bus Inspection
Which school-bus-specific items receive special attention during a post-trip inspection?
Which situation requires a mandatory school bus evacuation under Section 10?
Emergency Exit And Evacuation
At a railroad-highway crossing, how far from the nearest rail should a school bus stop?
Railroad Crossings
What should a school bus driver do with radios and noisy equipment at a railroad crossing?
Under FMCSA rules, what endorsement must a school bus applicant qualify for before the School Bus endorsement?
Massachusetts And Fmcsa Rules
Which mirror blind spot is specifically associated with the outside flat mirrors?
Question · Medium
Why must a driver remember that convex mirrors do not accurately reflect size and distance?
What overlap should properly adjusted crossover mirrors provide?
What is the safest conclusion if the inside mirror shows all students but an outside mirror is not properly adjusted?
A child drops a notebook and disappears from the driver's crossover mirror view. What is the safest driver response?
Why should the driver count students at the stop during loading?
Before completely opening the service door at a student stop, what final check should the driver make?
Which action is part of the safe sequence for leaving a stop after loading or unloading?
What should a driver do before allowing students who must cross the roadway to proceed?
For students who must cross after unloading, where should they first walk before going to the front of the bus?
Why should students stop at the right edge of the roadway before crossing?
What should students check before crossing in front of the bus after the driver signal?
At school unloading areas, why should the driver walk through the bus after students exit?
Which student behavior creates a special danger when leaving the bus?
What is the correct response if a driver wants to change the location of an official school bus stop?
Which pair of warning devices is specifically tied to loading and unloading under FMCSA school bus knowledge requirements?
What should be reported immediately after a post-trip inspection finds damage or a special situation?
Why is a working stop arm not enough by itself to make unloading safe?
Loading more…