Which level of the Hierarchy of Controls is considered the most effective for addressing a workplace hazard?
Cshm Risk Identification Control
Question · Easy
Day 1 vs 1 year later
Short
Under OSHA 29 CFR 1904, which of the following injuries MUST be recorded on the OSHA 300 Log?
Cshm Incident Investigation Evaluation
Question · Medium
ANSI/ASSP Z10 is the U.S. consensus standard that most closely corresponds to which international occupational health and safety management system standard?
Cshm Management Leadership
What is the formula for OSHA Total Recordable Incident Rate (TRIR)?
In a Job Hazard Analysis (JHA), what is the correct sequence of steps?
How deep before you need a trench box?
The NIOSH Lifting Equation calculates a Recommended Weight Limit (RWL) using which of the following load constants?
Cshm Ehs Operations Programs
Which OSHA standard establishes general requirements for Emergency Action Plans in general industry?
In Workers' Compensation insurance, what does an Experience Modification Rate (EMR) greater than 1.0 indicate?
Which of the following is an example of a LEADING safety indicator?
OSHA noise limits
Under 29 CFR 1910.147, what is the primary purpose of the Lockout/Tagout standard?
Which of the following BEST describes a root cause in accident investigation?
OSHA's Permissible Exposure Limit (PEL) for respirable crystalline silica in general industry is:
Question · Hard
A risk assessment matrix typically evaluates risk as a function of:
Fishbone diagram, x-rayed
Which training is REQUIRED by OSHA for all employees exposed to hazardous chemicals in the workplace?
The DART rate measures cases involving:
What is the primary distinction between a hazard and a risk?
Which ergonomic assessment tool evaluates upper-limb posture during short-cycle, repetitive tasks?
Lockout/tagout, called like a cup final
Behavior-Based Safety (BBS) programs primarily focus on:
Which OSHA form is used to record summary annual injury and illness totals and must be posted from February 1 to April 30?
What is the main difference between OSHA's PEL and ACGIH's TLV?
The '5 Whys' technique in incident investigation is designed to:
Never enter a tank before testing the air
The Fishbone (Ishikawa) diagram organizes potential causes of a problem into which classic categories?
Which OSHA CFR Part covers construction industry standards?
Fall protection is required in construction (29 CFR 1926.501) at heights of:
Which ISO standard specifically addresses risk management principles applicable across an organization?
Six feet: a hard-hat anthem
The Plan-Do-Check-Act (PDCA) cycle is the foundation of which management system concept?
In a confined space program (29 CFR 1910.146), an atmosphere is considered oxygen-deficient when it contains less than:
Which training evaluation model uses the four levels: Reaction, Learning, Behavior, and Results?
OSHA's General Duty Clause (Section 5(a)(1) of the OSH Act) requires employers to:
OSHA fall heights, to scale
Which of the following is the highest form of hazard control in the Hierarchy: process redesign that eliminates a solvent entirely, or installing exhaust ventilation?
A Process Hazard Analysis (PHA) under OSHA PSM (29 CFR 1910.119) must be revalidated at least every:
In an ergonomic analysis, the REBA tool is BEST suited for:
Under the GHS Hazard Communication Standard, a Safety Data Sheet (SDS) must have how many standardized sections?
What a Safety Data Sheet tells you
The primary financial instrument used by most employers to fund workers' compensation benefits is:
Which of the following BEST defines 'near miss' (also called close call or near hit)?
Which type of fire extinguisher is appropriate for ordinary combustibles such as wood, paper, and cloth?
The OSHA PEL for noise exposure is an 8-hour time-weighted average of:
A 'safety culture' is BEST defined as:
Which of the following is a PROCEDURAL control for working at heights?
Loading more…