Which document is the special inspector's primary reference for deciding whether installed structural steel framing and bolting comply with the project requirements?
General Requirements
Question · Easy
A bolted connection does not match the approved structural drawings. What is the special inspector's first required action?
Chapter 1: Special Inspection Roles, Responsibilities & Reporting
1.1 S1 Exam Modules, Approved References & Code Editions
Study guide
What is the main purpose of a special inspection progress report for structural steel bolting work?
Trades Exam Prep Podcast
Listen on Spotify
Podcast
Which item best describes the S1 special inspector's role on high-strength bolted steel connections?
Which report is typically required at the end of the special inspection assignment?
Which condition is most clearly within the S1 inspector's material verification duties?
Material Verification
1.2 Special Inspector Duties, Authority & Code Framework
What is a mill test report primarily used to verify?
Which high-strength bolt standard designation is commonly used for structural bolt assemblies such as A325 and A490 grades?
Why are bolt head markings important during inspection?
What should the inspector verify about bolt storage before installation?
1.3 Statement of Special Inspections, Approved Agencies & IBC Requirements
Which sample handling practice best supports reliable material testing?
In RCSC terminology, which term describes a joint where the connected plies are brought into firm contact without a specified minimum installed pretension?
High Strength Bolting
Which joint type relies on friction between faying surfaces to transfer shear without slip at service load?
Which item is one of the commonly recognized methods for pretensioning high-strength bolts?
1.4 Discrepancy Notification & Non-Conformance Resolution
What is the purpose of pre-installation verification testing for high-strength bolting assemblies?
For a pretensioned turn-of-nut installation, what condition must be established before applying the required nut rotation?
Which surface is the faying surface in a bolted steel connection?
Which inspection item specifically distinguishes an approved slip-critical joint from a joint that is only pretensioned?
1.5 Daily, Progress & Final Special Inspection Reports
What does a direct tension indicator primarily help verify?
What is indicated when the spline end of a properly used twist-off tension-control bolt shears off during installation?
Which condition should be reported as a bolting discrepancy?
Which drawing information is most important when verifying structural steel frame member sizes?
Steel Framing Observation
Chapter 2: Structural Steel Materials & Mill Verification
2.1 Structural Steel Shapes, Grades & ASTM Specifications
When checking a steel beam orientation, what should the inspector compare against the approved plans?
Which base plate item is specifically part of the S1 steel framing observation scope?
Why is grout beneath a column base plate inspected?
What should the inspector do when an installed column is located on the wrong grid line compared with the approved drawings?
2.2 Mill Test Reports (MTRs) & Heat Traceability
Which condition is a clear reason to question a delivered steel member before erection?
Which statement best describes the current ICC credential path for Structural Steel and Bolting Special Inspector?
Which statement correctly describes the current S1P Structural Steel and Bolting Plans module?
Which content area has the largest weight on the current 60-question S1C Codes module?
2.3 Material Condition, Sampling & Visual Examination
A contractor proposes using an unapproved bolt grade because it is available on site and appears stronger. What should the special inspector do?
Question · Medium
A discrepancy was reported to the contractor, but the same nonconforming bolted connection remains uncorrected at the next inspection. What is the next appropriate reporting step?
Which report entry is most useful for a daily special inspection report on pretensioned bolts?
A shop drawing detail conflicts with the approved structural drawings for a high-strength bolted connection. What should guide the inspector's acceptance decision?
Chapter 3: High-Strength Fasteners, Specifications & Joint Mechanics
3.1 ASTM F3125 Fastener Grades & Head Markings
Which situation best illustrates proper inspector independence under IBC special inspection principles?
The statement of special inspections lists high-strength bolting inspection, but the field crew says the connection is temporary. What should the inspector do?
A W-shape is specified as ASTM A992, but the mill test report identifies a different steel specification. What is the best inspection response?
A shipment contains bolts from multiple lots mixed in the same container with missing labels. Why is this a concern?
Loading more…