Which sequence correctly represents the DMAIC improvement roadmap?
Define Phase
Question · Easy
In Lean Six Sigma, a CTQ is best described as:
What is the primary purpose of a Lean Six Sigma project charter?
Business Exam Prep Podcast
Listen on Spotify
Podcast
The expression Y = f(x) in Six Sigma means that:
What does Pareto analysis help a Green Belt do?
Which activity best fits the Sort step in 5S?
A Green Belt is defining a project to reduce invoice rework. Which problem statement is strongest?
Question · Medium
A process produced 12 defects in 300 units, and each unit has 4 defect opportunities. What is the DPMO?
A process has three sequential steps with first-time yields of 0.95, 0.90, and 0.80. What is the rolled throughput yield?
Which statement best distinguishes Lean and Six Sigma in an integrated Lean Six Sigma project?
Which example is the Lean waste of overproduction?
Which cost is typically classified as cost of poor quality?
Which role is most typical for a Green Belt on a Lean Six Sigma project?
A customer says, "I need my online order to arrive when promised." Which CTQ is the best translation?
Which metric is most directly suited to measuring process cycle time improvement?
Why should a project charter include clear boundaries for in-scope and out-of-scope work?
A sponsor wants a project because "customers are angry," but no CTQ has been defined. What should the Green Belt do first?
Question · Hard
A candidate project has a large visible complaint volume, but the process owner cannot identify a process owner, baseline metric, or controllable scope. What is the best Green Belt concern?
A team has VOC demanding faster delivery, VOB demanding lower cost, and VOE reporting that current staffing is overloaded. What is the best Define-phase response?
A team completed a one-time 5S cleanup, but the work area returns to its old condition after two weeks. Which missing element most likely caused the backslide?
Which tool is best for organizing possible causes of a problem into categories such as method, machine, material, people, measurement, and environment?
Measure Phase
A SIPOC diagram summarizes which elements of a process?
Accuracy in measurement means:
Which statistic is most commonly used to describe the central location of a continuous data set?
Process capability analysis should be interpreted only after the process is:
Which chart or graph is best for displaying the shape, center, and spread of continuous measurement data?
During FMEA, which combination is typically used to calculate a risk priority number?
A team creates an X-Y matrix during Measure. What is its main purpose?
Which statement best describes gage repeatability and reproducibility?
A measurement system consistently reads 0.20 mm higher than a calibrated reference standard. Which MSA term describes this error?
A process has specification limits at 40 and 52, and the process standard deviation is 2. What is Cp?
What does Cpk account for that Cp does not?
A team wants to map both material flow and information flow and identify non-value-added time across a process. Which tool is most appropriate?
Which situation is best suited for attribute measurement system analysis?
A process has 25 defects across 500 units. What is the defects per unit?
Why should operational definitions be documented before collecting Measure-phase data?
A stable process has Cp = 1.60 and Cpk = 0.85. What is the best interpretation?
A Gage R&R study shows most observed variation comes from appraiser-to-appraiser differences. What is the best next action?
A team calculates capability on data with clear special-cause points on the control chart. What is the main risk?
A team is measuring a manual inspection process. Inspectors know which items are known defects, and the same inspector measures all repeated trials in the same order. What is the key MSA weakness?
The central limit theorem is important because it explains that:
Analyze Phase
In hypothesis testing, the null hypothesis usually represents:
Alpha risk in a hypothesis test is the risk of:
Which test is commonly used to compare the means of two independent groups when normal-data assumptions are reasonable?
Which test is commonly used to evaluate whether two categorical variables are associated in a contingency table?
What does a p-value represent in a hypothesis test?
A p-value is 0.03 and alpha is 0.05. What is the correct statistical decision?
Loading more…