Before entering a fire scene to collect evidence, which on-scene assessment must be completed first?
Pre Scene Planning
Question · Easy
Which container is the standard primary choice for collecting solid fire debris suspected to contain ignitable liquid residue?
Evidence Containers
When using a glass jar to collect fire debris for ignitable liquid residue analysis, which closure is acceptable?
Question · Medium
Government Exam Prep Podcast
Listen on Spotify
Podcast
A KAPAK or other heat-sealable nylon/polymer bag is appropriate for fire-debris ILR collection when:
How full should a one-quart paint can be filled with fire debris for ILR analysis?
Sampling Strategy
Which sample is most critical to defend against a substrate-pyrolysis false positive at trial?
Per ASTM E1412, which laboratory technique is the most common method for recovering ignitable liquid residue from fire debris?
Lab Coordination
Which ASTM standard governs the identification of ignitable liquid residues by gas chromatography-mass spectrometry (GC-MS)?
Which ASTM standard provides the standard practice for the collection and preservation of information and physical items by a technical investigator at fire scenes?
Documentation
Under Michigan v. Tyler (1978), what kind of entry may fire officials make without a warrant after a fire is extinguished?
Scene Security Authority
Under Michigan v. Clifford (1984), once investigators have identified arson and want to collect criminal evidence in a private residence, what is required?
Question · Hard
Per NFPA 921, a V-pattern on a vertical surface most commonly indicates:
Fire Patterns
Calcination of gypsum wallboard is most useful to the ECT as:
When sampling a suspected ignitable-liquid pour pattern on a wood subfloor, where should the ECT focus the highest-yield sample collection?
Which container is least appropriate for an ignitable-liquid-residue sample regardless of substrate?
Which field instrument detects hydrocarbon vapors at low ppm levels and is commonly used to triage suspected ILR areas?
Field Tests
How should a positive alert by an accelerant detection canine (ADC) be treated when collecting evidence?
When photographing a piece of evidence prior to collection, which photograph is required to support a 1:1 examination later?
Which element is required on a finished scene sketch?
Chain of custody begins:
Chain Of Custody
Which is the best practice for sealing a paint can containing fire debris?
Which item is properly classified as a comparison sample (Class B) at a fire scene?
Evidence Categories
A mobile phone is found near the area of origin and is still powered on. The ECT should:
Specific Evidence
Recovering a suspected Molotov cocktail bottle, the ECT should:
Per NFPA 921, an arc bead and a melted bead on a copper conductor can be distinguished by:
An ECT recovering a smoke alarm from the area of origin should document:
A blood-like stain is observed on a door frame at the entrance to a fire scene. The ECT should:
Why are paper or breathable containers used for blood-stained evidence?
What is the primary purpose of an entry log at a fire scene?
When two ECTs collect samples at the same scene, what is the best contamination-control practice?
Which is a Class A (identification) evidence item per typical fire-scene categorization?
Which IAAI training resource is required as part of the IAAI-ECT credentialing prerequisite?
Credential Requirements
What is the recertification cycle for the IAAI-ECT credential?
Per the IAAI-ECT practical examination, what is the minimum passing score on each of the 10 components?
Which agency standard most directly governs PPE selection for fire investigators entering a post-fire structure?
Which respiratory protection is the typical minimum for active post-fire overhaul-stage scenes with smoldering debris?
When packaging a sharp incendiary device component such as a broken glass shard, the ECT should:
Why must each evidence item have its own unique item number on the evidence log?
What is the correct order for photographing an evidence item before collection?
Which ASTM standard practice covers receiving, documenting, storing, and retrieving evidence?
Per ISO/IEC 17025, accredited fire-debris laboratories are evaluated on:
Which ASTM method covers solid-phase microextraction (SPME) headspace concentration of ignitable liquid residues?
ASTM E1618 reports ignitable liquid residues by:
When submitting fire debris to the lab, which contextual information is most important to include?
Pyrolysis of which substrate is most likely to mimic a medium petroleum distillate ILR on GC-MS?
Which photograph type captures texture and surface detail of footwear or tool impressions in soft fire debris?
An evidence log entry must include at minimum:
Loading more…