An industrial hygienist is evaluating a workplace where a new solvent is being introduced. What is the FIRST step in the exposure assessment process?
Cih Exposure Assessment
Question · Easy
Spin the wheel: name the extinguisher
Short
Which of the following direct-reading instruments is best suited for measuring noise levels to determine an 8-hour time-weighted average (TWA) exposure?
Chapter 1: The CIH Exam and How to Use This Guide
1.1 CIH Exam Format, Scoring, and Test-Day Logistics
Study guide
According to the hierarchy of controls, which of the following is the most effective method for controlling workplace hazards?
Cih Control
A key component of a successful risk management program is:
Cih Risk Management
The primary purpose of a local exhaust ventilation (LEV) system is to:
Question · Medium
OSHA noise limits
An industrial hygienist collects a personal air sample for silica. The laboratory reports a result of 40 µg/m³. The OSHA Action Level for respirable crystalline silica is 25 µg/m³ and the PEL is 50 µg/m³, both as 8-hour TWAs. What is the appropriate next step?
1.2 Eligibility, Application Windows, Fees, and Certification Maintenance
What is the primary function of the BGC Code of Ethics for industrial hygienists?
A worker is exposed to the following noise levels during an 8-hour shift: 90 dBA for 4 hours and 85 dBA for 4 hours. Using the OSHA 5-dB exchange rate, what is the worker's noise dose?
Question · Hard
Which type of respirator provides the highest level of protection?
Ergonomic risk factors in the workplace include:
1.3 The BGC Blueprint, Subject Areas, and a Calculation-First Study Plan
What does the term 'IDLH' stand for in industrial hygiene?
The three main routes of exposure for chemicals in the workplace are:
A company is replacing an old, noisy machine with a new, quieter model. This is an example of which type of control?
Which of the following is an example of a biological hazard?
Chapter 2: Basic Science & Calculations
2.1 Gas Laws and Vapor Calculations
In risk management, what is the definition of 'risk'?
What is the primary purpose of an audiometric testing program in the workplace?
The 'action level' for a chemical substance is typically set at:
The best type of glove to protect against a specific chemical is determined by consulting:
2.2 Unit Conversions: ppm, mg/m³, and Standard Temperature/Pressure
A grab sample for air monitoring is:
An example of an administrative control for an ergonomic hazard is:
The process by which a chemical passes through a protective glove material on a molecular level is called:
In epidemiology, 'incidence rate' refers to:
2.3 Fluid Mechanics and Airflow Fundamentals
What is the primary function of a diffuser in a local exhaust ventilation system's stack?
A key element of a successful emergency response plan is:
Which of the following sampling media is most appropriate for collecting airborne asbestos fibers?
Ionizing radiation includes all of the following EXCEPT:
Chapter 3: Air Sampling & Instrumentation
3.1 Active and Passive Air Sampling Strategies
In toxicology, the LD50 is a measure of:
A negative pressure fit check for a respirator involves:
Heat stress indices, such as the Wet Bulb Globe Temperature (WBGT), are used to:
Which of the following is a primary goal of industrial hygiene program management?
3.2 Particulate and Aerosol Sampling
A sound pressure level of 100 dB is how many times more intense than a sound pressure level of 80 dB?
The 'span of control' in an Incident Command System (ICS) refers to:
A ventilation system is moving 2,000 cubic feet per minute (CFM) of air through a 12-inch diameter duct. What is the velocity of the air in the duct in feet per minute (fpm)?
Which of the following is considered a 'confined space'?
3.3 Direct-Reading Instruments and Calibration
The purpose of a 'Job Hazard Analysis' (JHA) is to:
A confounding variable in an epidemiological study is one that:
The 'inverse square law' for radiation states that:
Loading more…