What is a combination vehicle?
Combination Vehicle Basics
Question · Easy
POV: the turn is tighter than it looks
Short
Which of the following is the most common combination vehicle on U.S. highways?
What does GCWR stand for?
A Class A CDL is required when the combination has a GCWR of at least 26,001 lb AND the towed unit has a GVWR over:
Weights And Classifications
Question · Medium
What is off-tracking?
Driving Safely
You are making a right turn in a tractor-semi-trailer at a city intersection. Because of off-tracking, you should:
When making a left turn in a combination vehicle, you should:
Compared to a straight truck, a combination vehicle's steering response is:
What is a jackknife?
If you start to feel the trailer skidding and swinging out behind you, what is the correct response?
Why are empty trailers more prone to brake lock-up than loaded trailers?
Stopping distance for a combination vehicle is:
On a wet, slippery road in a combination vehicle, you should:
What is the kingpin?
Coupling
Before backing under a trailer, the locking jaws on the fifth wheel must be:
Which step is the correct order of the coupling procedure?
Question · Hard
How do you perform the tug test after coupling?
After the tug test, you should also:
There is a visible gap between the trailer apron and the fifth wheel after coupling. What does this likely mean?
What color glad-hand is used for the emergency (supply) line?
Air Brakes
What color glad-hand is used for the service line?
What happens if the emergency and service glad-hands are cross-connected?
The red 8-sided 'Trailer Air Supply' knob on the dash is:
When should you use the trailer hand valve (trolley valve)?
The trailer hand valve must NEVER be used:
What does the tractor protection valve do?
How do you test the trailer service brakes after coupling?
In which gear should the tractor be when backing under a trailer?
Before coupling, you should position the tractor:
When inspecting the fifth wheel before coupling, you should check for:
What is the correct height of the trailer before backing under with the tractor?
What is the correct order to disconnect the air lines and electrical cord when uncoupling?
Uncoupling
Before pulling the tractor out from under a trailer during uncoupling, you must:
What is the proper sequence for uncoupling?
When backing a tractor-trailer in a straight line, the steering wheel should be:
Backing
To swing the trailer to the LEFT while backing, you should turn the steering wheel:
When backing a combination vehicle, you should:
What is the typical maximum gross combination weight on the Federal interstate system without special permits?
The bridge formula is used to:
A sliding fifth wheel allows you to:
Weight Distribution
Sliding the trailer tandems FORWARD shifts more weight to:
Too little weight on the drive axles can cause:
Combination vehicles are more likely than straight trucks to roll over because:
What is the most common cause of truck rollovers in turns?
When you connect a glad-hand to the trailer, you should:
During pre-trip, you find the glad-hand seals are dry, cracked, and worn. You should:
Inspection
During pre-trip, you should inspect the landing gear for:
Loading more…