Which California CDL class is generally required for a tractor-semitrailer combination with GCWR at least 26,001 pounds and a trailer over 10,000 pounds GVWR?
California Cdl Basics
Question · Easy
POV: the turn is tighter than it looks
Short
Who needs the Combination Vehicles knowledge test in the CDL process?
What minimum score is required on each CDL knowledge test under 49 CFR 383.135?
Before applying for the California CDL skills test, how long must an applicant hold the CLP?
What trailer part locks into the fifth wheel jaws?
Coupling System
What is the fifth wheel used for on a tractor-semitrailer?
What does a tug test verify after coupling?
Coupling Procedure
What is a high coupling?
Which glad hand color normally identifies the trailer emergency or supply line?
Air And Electric Lines
Which glad hand color normally identifies the trailer service line?
What connection powers trailer brake lights, turn signals, and marker lights?
After coupling and checks, what should be true of the landing gear before driving?
What supports a semitrailer nose after it is uncoupled?
Uncoupling
What does the trailer hand valve apply?
Trailer Brakes
Why is the trailer hand valve not a parking brake?
What is off-tracking?
Safe Turns
Why do tractor-trailers often need extra room for right turns?
Why do combination vehicles need extra following distance?
Safe Operation
What load placement helps reduce rollover risk?
Rollover Prevention
What should a combination driver do before a sharp curve?
What is a jackknife?
Skids And Jackknife
What is the first correction for a trailer skid caused by locked trailer wheels?
When unsure of clearance while backing, what should the driver do?
Backing
What should you do if the trailer angle becomes too sharp while backing?
What should be checked on the lower fifth wheel?
Combination Inspection
What should be checked on trailer air lines during inspection?
Which trailer lights must be checked before driving?
Why inspect trailer tires and wheels?
Why are blind spots large on combination vehicles?
How many attempts does California DMV allow for each required knowledge test on one application?
Why should the tractor be aligned straight with the trailer before backing under it?
Question · Medium
What is the risk if a trailer is too low before coupling?
What is the risk if a trailer is too high before coupling?
Why is a visual inspection required after a tug test?
Why must the fifth wheel release arm and safety latch be secure?
Why must air and electrical lines have enough slack?
What is the hazard of crossing red and blue glad hands?
What should you do if air leaks continuously from a glad hand?
Why check that air reaches all trailers?
What does the tractor protection valve do?
What can happen when trailer supply pressure drops too low?
What should a driver do if trailer brakes fail a slow-speed test?
Why must the foot brake apply trailer brakes correctly?
What does ABS do for a trailer?
How should you drive a combination vehicle on wet roads?
How should a driver respond to strong crosswinds with a large trailer?
Why should lane changes be gradual in a combination vehicle?
Loading more…