What is the primary purpose of a safety valve on a boiler?
Boiler Operations
Question · Easy
Your heart has these. So do pipes.
Short
Fire-tube boiler vs. water-tube boiler
Boiler Types & Construction
Flashcard
What does the term 'complete combustion' mean?
Combustion
___ marine: firetube workhorse whose exhaust gases travel through horizontal tubes and give up heat to water on the shell side.
Boiler types and construction
Guess the Term
Introduction & Exam Overview
1.1 About the Boiler Operator Exam
Study guide
Cheat sheet
Why is it important to treat boiler feedwater?
Water Treatment
Question · Medium
Read the clue and guess the term in 6 tries.
Game
Low-pressure boiler limits under ASME Section IV
What is the function of a feedwater regulator?
Boiler Systems And Controls
___ sheet: highest plate of an internal firebox; the plate overheats and bulges if the water level falls below it.
The ASME code that governs the construction of heating boilers is:
Safety And Regulations
Power boiler (ASME Section I) and its nameplate stamp
What is a 'hydrostatic test' performed on a boiler?
Capacity unit for rating a steam generator's output; one equals 33,475 Btu per hour.
1.2 How to Use This Study Guide
A negative pressure in the furnace is typically referred to as:
Swap tiles to line up three of the same term.
Term Match
Scotch marine boiler
What is the primary reason for performing a boiler bottom blowdown?
Device that meters how much steam moves from a system's high side to its low side during normal operation, holding the conditions downstream at set values.
Valves and fittings
In a steam system, what is the purpose of a steam trap?
Steam boiler vs. hydronic (hot water) boiler
What is the immediate first step an operator should take in a low-water condition?
Question · Hard
___ flame: small ignition flame that must be proved by a scanner before the main fuel valves are allowed to open.
Combustion and burners
Boiler Types, Construction & Steam Fundamentals
2.1 Types of Boilers: Fire-Tube vs. Water-Tube, Low- vs. High-Pressure
What is a major characteristic of a fire-tube boiler?
Flip two cards at a time to find matching terms.
Term Pairs
Thermal fluid heater
High levels of Carbon Monoxide (CO) in the flue gas indicate:
To sweep a furnace with air changes after a burner trip, driving unburned gases down below their explosive limit before ignition is tried again.
What is the primary purpose of a zeolite water softener?
Steam drum and mud drum in a water-tube boiler
The device that shuts down the burner in the event of a flame failure is called the:
Adjustable plate that sets how much air enters and leaves a combustion chamber; the control system positions it with the fuel regulator to hold fuel-to-air ratios.
2.2 Boiler Construction & Major Components
What is 'thermal shock' in a boiler?
Find five hidden terms in a grid of letters.
Term Search
Boiler heating surface
What is the primary function of boiler insulation (refractory and lagging)?
Low-water fuel ___: float or probe device that halts the burner's fuel supply once the level sinks beneath a safe operating range.
Boiler operating controls
The minimum temperature at which a fuel oil gives off enough vapor to ignite momentarily is called its:
The three T's of combustion
Combustion, Fuels & Burners
Oxygen pitting in a boiler is a form of:
Loading more…