A rectangular switch board panel measures 40 cm in length and 25 cm in width. What is its area?
Basic Mathematics
Question · Easy
If the radius of a circular conduit pipe is 7 cm, what is its diameter?
Using π ≈ 22/7, what is the approximate area of a circular junction box cover with a radius of 7 cm?
Question · Medium
Trades Exam Prep Podcast
Listen on Spotify
Podcast
A triangular cable tray support bracket has a base of 12 cm and a height of 8 cm. What is its area?
A rectangular junction box measures 10 cm long, 8 cm wide, and 5 cm deep. What is its internal volume?
How many centimeters are there in 2.5 meters of PVC conduit?
A cable gland is specified as 1 inch in diameter. Using 1 inch ≈ 2.54 cm, what is this measurement in centimeters (to two decimal places)?
Which measuring instrument is most appropriate for accurately measuring the diameter of a thin conductor wire in fractions of a millimeter?
A job sheet specifies a hole diameter of "10 mm ± 0.5 mm." What is the smallest acceptable diameter for the finished hole?
Question · Hard
A wiring job requires four separate circuit runs of 3.5 m, 4.2 m, 2.8 m, and 5.0 m. If 10% extra length must be added for jointing and wastage, approximately how much cable should be purchased?
Which pair correctly represents a metric unit and its corresponding imperial unit used for expressing the same type of measurement?
What is the main purpose of wearing Personal Protective Equipment (PPE) during electrical installation work?
Occupational Safety Health
Which item of Personal Protective Equipment is specifically designed to protect an electrician from electric shock while handling live conductors?
A frayed extension cord with exposed copper strands lying across a wet workshop floor represents which combination of hazards?
While inspecting the work area before starting a job, a trainee notices a damaged extension lead. What is the correct first action according to OSH procedure?
A yellow triangular sign with a black lightning bolt symbol posted near a distribution board is warning workers about which hazard?
If a co-worker receives an electric shock while still in contact with a live conductor, what should be done first before attempting to help them?
After a minor incident where a trainee received a small shock from a faulty switch, why is it important to record the details of the incident accurately and promptly?
Which of the following best describes the purpose of practicing "5S" housekeeping in an electrical workshop?
Why is it important for a new worker joining an electrical installation crew to first understand the team's objectives and work processes?
Team Environment
On a job site, who is primarily responsible for defining each team member's role and responsibilities?
What does understanding the "reporting relationship" within a team primarily help a worker do?
Which of the following is an example of an effective form of communication with team members while working on a shared electrical installation task?
In a team-based wiring installation project, what does the concept of "individual deliverables" refer to?
Two crew members disagree on how to route a channel-wiring circuit on a job site. According to good team-environment practice, what is the most appropriate way to resolve this?
Which of the following is considered an occupation within the construction sector of Bangladesh, alongside electrical installation and maintenance?
Construction Sector
Why must an electrical trainee follow the construction sector's established processes and procedures rather than improvising their own methods on a job site?
What does "identifying workplace requirements" mainly involve for a construction sector trainee?
A trainee notices that work is repeatedly delayed because materials arrive late from the store. What is the recommended approach under "organizing own workload" practices?
Why should an electrician working in the construction sector stay aware of new trends and technologies, such as updated wiring materials or tools?
Understanding "employment conditions" within the construction sector helps a worker primarily to:
While organizing daily workload, a trainee is expected to monitor their own work against workplace standards. What should they do if they identify an area for improvement in their own performance?
Why is it important for a construction sector worker to identify and interpret relevant workplace policies and guidelines?
Why do electricians use screwdrivers with insulated handles when working near live electrical fittings?
Electrical Tools
What is the primary function of a wire stripper in electrical work?
Long-nose (needle-nose) pliers are especially useful in electrical work for which task?
A line tester (neon test screwdriver) is used by an electrician mainly to:
What is the key difference between a hand tool and a power tool?
Before using a power drill on a job site, what should an electrician confirm regarding the power source and safety requirements?
Why is a soft-faced (rubber or wooden) hammer preferred over a steel hammer when installing a rawl plug into a drilled wall?
What is the main purpose of performing preventive maintenance on hand and power tools?
When performing preventive maintenance that involves lubricating a tool, what should the electrician primarily refer to before choosing a lubricant?
During a routine tool inspection, an electrician finds a power drill with a cracked casing exposing internal wiring. What is the correct workplace procedure?
Combination pliers are commonly used in electrical work for which general task?
A hacksaw is the appropriate tool for which task during channel wiring installation?
After completing a wiring task, why should tools and equipment be cleaned and stored in their designated location rather than left on the workbench?
An electrician needs to make a small, clean, non-damaging cut through the outer insulation of a cable without nicking the copper conductor inside. Which tool is best suited for this task?
Loading more…