A design lead is choosing a certification path for a role that owns GD&T callout selection on production drawings. Which ASME GDTP level best matches that responsibility?
Exam Administration
Question · Easy
Why must a GDTP Senior candidate identify the Y14.5 edition before studying?
Scope, General Dimensioning & Symbology
Flashcard
Which applicant meets ASME's current Senior Level experience requirement?
Introduction & Exam Overview
1.1 Current Exam Facts
Study guide
Cheat sheet
Which Y14.5 revisions does ASME currently list as regular GDTP offerings?
Engineering Exam Prep Podcast
Listen on Spotify
Podcast
What information is read in sequence in a feature control frame?
What is the official name to use for this practice exam metadata?
A designer wants to control how a bracket mounts first, how it clocks second, and how a slot locates third. What Senior-level decision is most important before writing feature control frames?
Datum Referencing
What does a basic dimension communicate?
A flat machined base face is the surface that seats against a mating plate. Which datum role is usually most appropriate for that face?
1.2 Senior Level vs Technologist and Y14.5 Revisions
A clearance hole pattern only needs the screws to assemble without interference. Which modifier is commonly useful on the position tolerance of the holes?
Location
What is Rule #1's perfect-form boundary for a regular feature of size?
A thin wall around a bore must never become too small because pressure containment depends on remaining stock. Which design choice is most directly aligned with that function?
A profile control is applied to an exterior cast surface mainly to preserve fit against a mating cover. What should the Senior designer ensure is defined?
Profile
When no material modifier is shown, what defaults apply to a tolerance value and a datum reference?
A long threaded stud projects from a plate and must enter a mating hole before the plate seats. Which control often communicates the functional need better than position alone?
1.3 How to Use This Guide and Study Strategy
Why might a Senior designer use datum targets on a rough casting instead of the entire casting surface as a datum feature?
How are a datum, datum feature, and datum feature simulator different?
Datum Reference Frames
A hole pattern must locate tightly as a group, but the individual spacing within the pattern is more critical than the pattern's overall location to the housing. Which control strategy is commonly used?
What design purpose does virtual condition serve for a pin controlled by position at MMC?
What six degrees of freedom can a datum reference frame constrain?
For an internal hole controlled at MMC, what happens to available position tolerance as the actual hole gets larger?
1.4 The Y14.5-2018 Senior Exam and What Changed from 2009
Which statement best describes RFS as a Senior design choice?
Dimensioning Symbology
Which motions does a primary planar datum normally constrain?
A datum feature simulator should usually represent what?
Which drawing practice best communicates that a dimension is theoretically exact and controlled by a geometric tolerance?
Which motions does a secondary planar datum normally constrain after a primary plane?
A datum reference order is A|B|C. What does this order communicate?
Dimensioning and Symbology
2.1 Y14.5 Dimensioning Rules, Limits, and Fits
A runout control is most naturally associated with which functional condition?
Runout
What is the usual role of a tertiary planar datum?
A flatness tolerance applied to a surface without datum references primarily controls what?
Form
A designer wants a machined face to be 90 degrees to datum A but does not need to locate it from A. Which control is most direct?
Orientation
How should a Senior-level designer choose datum precedence?
Which statement best describes functional gaging in a Senior GDTP context?
2.2 Basic Dimensions and Their Role
A Senior reviewer sees a tight tolerance on a nonfunctional cosmetic boss while a sealing face has only a loose title-block tolerance. What is the main design concern?
What does RMB mean on a datum feature reference?
Loading more…