100+ Free MN Low Voltage Practice Questions

Pass your Minnesota Low Voltage Contractor Licensing Exam exam on the first try — instant access, no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately

100+ Questions

100% Free

1 / 100

Question 1

Score: 0/0

What is the maximum smoke detector spacing on smooth ceilings per NFPA 72?

20 feet

40 feet

30 feet

50 feet

to track

Same family resources

More Low Voltage Contractor Prep

Continue through related practice pages, study guides, comparisons, and articles from the same exam family.

Practice Pages

Alaska Low Voltage Contractor Practice100 questions Arizona Low Voltage Contractor Practice100 questions California Low Voltage Contractor Practice100 questions Connecticut Low Voltage Contractor Practice100 questions Delaware Low Voltage Contractor Practice100 questions Florida Low Voltage Contractor Practice100 questions

Free Low Voltage Contractor Practice Test by State 2026: 2,800+ Questions25 min read

2026 Statistics

Key Facts: MN Low Voltage Exam

70%

Passing Score

MN Electricity Board

100 Q

Practice Questions

OpenExamPrep

Power Ltd

License Type

MN Electricity Board

MEB

Licensing Agency

MN Electricity Board

Minnesota requires a Power Limited Technician or Technology Systems Contractor license for low voltage work, administered by the Minnesota Electricity Board. The exam covers NEC codes, fire alarm, security, cabling, and state regulations.

Sample MN Low Voltage Practice Questions

Try these sample questions to test your MN Low Voltage exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1Which Minnesota state agency oversees low voltage electrical licensing?

A.Minnesota Department of Labor

B.Minnesota Electricity Board

C.Minnesota Board of Electricity (Dept of Labor)

D.Minnesota Department of Commerce

Explanation: The Minnesota Electricity Board oversees electrical licensing, including Power Limited Technician and Technology Systems Contractor licenses for low voltage work.

2What license does Minnesota require for low voltage work?

A.Master Electrician only

B.Power Limited Technician or Technology Systems Contractor license

C.General Electrician only

D.No license required

Explanation: Minnesota requires either a Power Limited Technician or Technology Systems Contractor license for low voltage work. These licenses cover fire alarm, security, and telecommunications installations.

3What is a Power Limited Technician license in Minnesota?

A.A license for high-voltage power plant work

B.A license to install systems operating at 100 volts or less

C.A temporary learning permit

D.A license for elevator work only

Explanation: A Minnesota Power Limited Technician license authorizes installation of low voltage systems operating at 100 volts or less, including fire alarm, security, data, and telecom systems.

4What is the difference between a Power Limited Technician and Technology Systems Contractor?

A.No difference

B.Technology Systems Contractor can own a business while Technician works under supervision

C.Technician is the higher-level license

D.Contractor is for residential only

Explanation: A Technology Systems Contractor can own and operate a low voltage business in Minnesota, while a Power Limited Technician works under the supervision of a licensed contractor.

5What NEC edition does Minnesota follow?

A.2014 NEC

B.2017 NEC

C.2020 NEC

D.2023 NEC

Explanation: Minnesota follows the 2020 NEC with state-specific amendments through the Minnesota Electricity Board. Contractors must know both the NEC and Minnesota amendments.

6What happens in Minnesota if you perform low voltage work without a license?

A.Nothing, it is unregulated

B.Fines, stop-work orders, and potential criminal charges

C.A warning letter only

D.Only the customer is penalized

Explanation: Minnesota imposes fines, stop-work orders, and potential criminal charges for unlicensed electrical work. The Electricity Board actively enforces licensing requirements.

7What permit requirement applies to low voltage work in Minnesota?

A.No permits needed

B.Electrical permits from the local authority or state are required

C.Only verbal notification

D.Permits for commercial only

Explanation: Minnesota requires electrical permits for low voltage work from either the local authority having jurisdiction or the state, depending on the location.

8What insurance does Minnesota require for Technology Systems Contractors?

A.No insurance required

B.General liability and workers' compensation insurance

C.Only vehicle insurance

D.Umbrella policy only

Explanation: Minnesota requires Technology Systems Contractors to maintain general liability and workers' compensation insurance to protect clients and employees.

9What continuing education does Minnesota require for Power Limited Technicians?

A.No CE required

B.Continuing education as required by the Electricity Board

C.50 hours annually

D.CE only at initial licensing

Explanation: Minnesota requires continuing education as determined by the Electricity Board for license renewal. Requirements must be met to maintain active license status.

10What Minnesota code supplement addresses fire alarm installations?

A.No state supplements exist

B.Minnesota State Fire Code and NFPA 72

C.Only the NEC

D.Municipal codes only

Explanation: Minnesota uses the State Fire Code along with NFPA 72 for fire alarm installations. These may have requirements beyond the NEC that contractors must follow.

About the MN Low Voltage Exam

The Minnesota low voltage contractor exam tests knowledge of NEC Articles 725, 760, 770, and 800, fire alarm systems, security installations, structured cabling, and Minnesota-specific licensing requirements. Candidates must qualify as a Power Limited Technician or Technology Systems Contractor through the Minnesota Electricity Board.

Questions

100 scored questions

Time Limit

2 hours

Passing Score

70%

Exam Fee

Varies (Minnesota Electricity Board)

MN Low Voltage Exam Content Outline

25%

NEC Codes & Standards

NEC Articles 725, 760, 770, 800; cable ratings; wiring methods; conduit fill

25%

Fire Alarm Systems

NFPA 72, initiating devices, notification appliances, FACP, circuit classes, testing

20%

Security & Access Control

Intrusion detection, IP cameras, access control, motion detectors, NVR systems

15%

Structured Cabling & Telecom

TIA-568, Cat 6/6a, fiber optic, PoE, patch panels, certification testing

15%

Minnesota Regulations & Safety

MN Electricity Board licensing, Power Limited Technician, permits, OSHA, firestopping

How to Pass the MN Low Voltage Exam

What You Need to Know

Passing score: 70%
Exam length: 100 questions
Time limit: 2 hours
Exam fee: Varies

Keys to Passing

Complete 500+ practice questions
Score 80%+ consistently before scheduling
Focus on highest-weighted sections
Use our AI tutor for tough concepts

MN Low Voltage Study Tips from Top Performers

1Master NEC Articles 725, 760, 770, and 800 for low voltage circuit classifications

2Study NFPA 72 fire alarm requirements and Minnesota fire code specifics

3Review Minnesota Electricity Board licensing requirements for Power Limited Technicians

4Practice TIA-568 structured cabling standards and certification testing

5Understand Minnesota-specific electrical code amendments and regulations

Frequently Asked Questions

What license do I need for low voltage work in Minnesota?

Minnesota requires a Power Limited Technician or Technology Systems Contractor license from the Minnesota Electricity Board for low voltage work including fire alarm, security, and telecom.

What topics are covered on the Minnesota low voltage exam?

The exam covers NEC Articles 725, 760, 770, and 800; fire alarm systems (NFPA 72); security and access control; structured cabling (TIA-568); and Minnesota-specific regulations.

What score do I need to pass?

You need a minimum of 70% to pass the Minnesota low voltage contractor exam.

What is a Power Limited Technician in Minnesota?

A Power Limited Technician is licensed to install, maintain, and repair low voltage systems operating at 100 volts or less, including fire alarm, security, and telecommunications systems.