CSWPA-DT: Certified SOLIDWORKS Professional Advanced — Drawing Tools

In a SOLIDWORKS drawing, which view type is created by drawing a line that is not horizontal or vertical to reveal the true shape of a feature on an inclined face?

• ADetail view
• BProjected view
• CAuxiliary view
• DCrop view

When you create a Section View in SOLIDWORKS by sketching a single straight section line through a part view, what is produced?

• AA half section view showing only one quarter of the part
• BA full section view showing the part cut completely across the cutting plane
• CA removed section view detached from the drawing
• DA broken-out section limited to a sketched profile

To create a Broken-out Section view in SOLIDWORKS, which sketch entity and additional input are required?

• AAn open centerline plus an angle
• BA single point plus a radius
• CTwo parallel lines plus a section label
• DA closed spline (or other closed profile) plus a depth value or reference

A Detail View in a SOLIDWORKS drawing is created by which action?

• ASelecting two reference edges and a scale
• BSketching a circle (or closed profile) around the area to enlarge in a parent view
• CDragging a projected view from the parent view
• DChoosing a model face and the Relative To Model command

Which SOLIDWORKS view tool lets you superimpose a configuration of a part or assembly onto an existing view to show a different position (such as an open and closed state)?

• AAuxiliary View
• BAlternate Position View
• CCrop View
• DEmpty View

What does the Relative To Model view command in a SOLIDWORKS drawing allow you to do?

• ACrop a view to a sketched boundary
• BBreak a long view to shorten the drawing
• CDefine a custom view orientation by selecting two model faces or planes to set as the fro…
• DInsert a bill of materials linked to the model

A Break View (broken view) is most appropriately used in a SOLIDWORKS drawing to:

• ACut a part open to show internal features
• BShorten the display of a long, uniform-section part so it fits on the sheet at a larger s…
• CEnlarge a small feature for clarity
• DReposition a component to a second location

In SOLIDWORKS, dimensions inserted automatically with Model Items differ from manually added Smart Dimensions in that Model Items dimensions are:

• AReference (driven) dimensions that cannot affect the model
• BAlways shown in a different color and never editable
• CDriving dimensions imported from the part/feature definition that update the model if cha…
• DLimited to the first sheet of a drawing

When you insert Model Items into a drawing and choose the destination as 'Entire model' with 'Import items into all views' enabled, SOLIDWORKS will:

• APlace every dimension only in the front view
• BCreate reference dimensions exclusively
• CDelete existing manual dimensions first
• DDistribute model dimensions and annotations across all drawing views, placing each in the…

Which tool quickly applies a consistent dimensioning scheme (such as baseline or ordinate-style spacing) to a group of selected dimensions in a SOLIDWORKS drawing?

• ASmart Dimension only
• BHole Callout
• CAuto Arrange Dimensions / DimXpert tools in the drawing
• DDatum Feature

A Bill of Materials inserted in a SOLIDWORKS drawing can be set to which three primary BOM types?

• ALinear, Radial, and Angular
• BTop-level only, Parts only, and Indented
• CDriving, Driven, and Reference
• DFront, Top, and Isometric

To show every sub-assembly's components broken out hierarchically within a single BOM in SOLIDWORKS, which BOM type and option should be used?

• AParts-only BOM
• BTop-level-only BOM
• CIndented BOM with the option to show component children (detailed numbering)
• DA general table with manual rows

In a SOLIDWORKS BOM, when an indented BOM uses 'Indented' numbering with detailed cut list and you set 'Component grouping' so identical configurations are combined, the QTY column will:

• AAlways list each instance on its own row
• BDisplay only the top-level assembly count
• CIgnore quantity entirely
• DSum the quantity of identical components/configurations into one row

To display a part's custom property (for example, a 'Vendor' or 'Material' value) in a column of a SOLIDWORKS BOM, you should:

• AInsert a column and choose Column type 'Custom Property,' then select the property name
• BType the value manually into each cell
• CUse a Hole Table instead of a BOM
• DAdd a note and link it to the sheet format

In a SOLIDWORKS BOM you need a column that multiplies each row's quantity by a unit weight stored in a custom property. The most reliable approach is to:

• ACreate a column with an equation that references the QTY column and the weight property
• BHand-calculate each cell and type the result
• CUse a revision table column
• DConvert the BOM to an Excel-based BOM and stop linking it

A balloon in a SOLIDWORKS drawing automatically displays which value by default when attached to a component that is listed in the BOM?

• AThe component's mass
• BThe component's BOM item number
• CThe drawing sheet number
• DThe component's material

Which SOLIDWORKS tool automatically inserts a balloon for every component shown in a selected drawing view at once?

• AAuto Balloon
• BMagnetic Line
• CStacked Balloon
• DNote

If a SOLIDWORKS BOM is set to 'Do not change item numbers' and a component is later suppressed or removed, the result is typically:

• AA gap (missing item number) in the sequence because remaining items keep their original n…
• BAutomatic renumbering of all rows from 1
• CDeletion of the entire BOM
• DConversion of the BOM to parts-only

A drawing Template (.drwdot) in SOLIDWORKS primarily stores which of the following?

• ADocument properties such as units, dimensioning standard, and default settings, plus opti…
• BOnly the title block geometry
• CThe model's feature tree
• DOnly the sheet's border lines

A Sheet Format (.slddrt) in SOLIDWORKS contains primarily:

• AThe model geometry to be detailed
• BThe drawing border, title block, and title-block fields/notes linked to custom properties
• CThe list of drawing views to create
• DThe system options for the SOLIDWORKS application

To make a title-block field (such as the drawing's title or part number) populate automatically from the model, you should link the note in the sheet format to:

• AA fixed typed string
• BThe sheet scale
• CA custom or configuration-specific property using the Link to Property option
• DThe active layer name

In SOLIDWORKS, what is the correct relationship between a drawing template and a sheet format?

• AA sheet format stores document properties and a template provides the border
• BA template can store document properties and reference a sheet format; the sheet format p…
• CThey are the same file with two extensions
• DA template can only exist inside a sheet format

Layers in a SOLIDWORKS drawing are most useful for:

• AControlling the color, line style, and visibility of grouped annotations and geometry
• BStoring the BOM quantity values
• CDefining the part's material
• DSetting the model's mass properties

Which SOLIDWORKS feature lets a single drawing show different configurations of the same part in separate views (for example, a machined vs. cast configuration)?

• ASetting each view's referenced configuration in the View Properties
• BCreating a new part file for each configuration
• CUsing a revision table
• DApplying a different layer to each view

A Revision Table in a SOLIDWORKS drawing is primarily used to:

• ATrack document revisions with revision symbols, dates, and descriptions
• BList all components and quantities in an assembly
• CReport hole sizes and locations
• DShow dimension tolerances

When you place a revision triangle (revision symbol) on a SOLIDWORKS drawing and a new row is added to the revision table, the symbol's letter should:

• AAlways display the letter A regardless of revisions
• BReference the current revision row so it matches the latest revision entry
• CShow the sheet number
• DShow the BOM item number

Which annotation tool in SOLIDWORKS is specifically designed to call out hole size, depth, and quantity using standard callout symbols automatically?

• ASmart Dimension
• BSurface Finish
• CWeld Symbol
• DHole Callout

A Geometric Tolerance (feature control frame) symbol in SOLIDWORKS is placed using which tool, and it can be attached to:

• AThe Note tool, attached only to the title block
• BThe Balloon tool, attached to a BOM row
• CThe Geometric Tolerance tool, attached to an edge, dimension, or leader
• DThe Center Mark tool, attached to a circle

In a feature control frame, a Datum reference such as 'A' must correspond to:

• AThe sheet revision letter
• BThe drawing layer named A
• CThe first BOM item number
• DA datum feature symbol placed on the corresponding feature in the drawing

Which SOLIDWORKS tool places the small cross/center indicator at the center of a circle or arc in a drawing view, often required before adding a bolt-circle or hole dimension?

• ACenterline
• BCenter Mark
• CDatum Target
• DSurface Finish

A Linked Note in a SOLIDWORKS drawing differs from a typed note because its text:

• APulls from a property or dimension value and updates automatically when the source changes
• BCan never be edited
• CAlways appears in red
• DOnly exists in the sheet format

To transfer sketch geometry you draw in a drawing view onto another view so the two stay associated, the correct workflow involves:

• AExporting to DXF and re-importing
• BConverting the entities to a block first, mandatorily
• CDeleting and redrawing them in each view
• DSelecting the sketch entities and using a context option to add them to a view, ensuring…

Which statement about the focus of a drawing view in SOLIDWORKS is correct?

• AOnly one view can ever be created per sheet
• BFocus has no effect on where sketch entities belong
• CA view with focus cannot be moved
• DA view with focus shows a highlighted boundary, and new sketch entities are associated to…

An Aligned Section View in SOLIDWORKS is created when the section line:

• AIs a single straight line through the center
• BIs a closed spline
• CIs parallel to an inclined face
• DConsists of two non-parallel segments, and the cut is unfolded (rotated) into a single pl…

When a Section View would cut through a rib or web, drafting standards (and SOLIDWORKS section options) typically call for the rib to be:

• AHatched twice as densely
• BRemoved from the model
• CExcluded from hatching (shown unsectioned) to avoid a misleading solid appearance
• DShown only in the parent view

A Crop View in SOLIDWORKS is created by:

• ASketching a closed profile in a view and applying Crop View to keep only the geometry ins…
• BSelecting a section line
• CChoosing two model planes
• DInserting a BOM

In a SOLIDWORKS drawing, the difference between Tangent Edges Visible, Tangent Edges With Font, and Tangent Edges Removed affects:

• AThe BOM numbering scheme
• BThe sheet scale
• CHow edges where faces meet tangentially (such as a fillet blending into a flat) are displ…
• DThe revision table format

Which display style button on a drawing view toolbar shows the model with hidden lines visible as dashed lines?

• AHidden Lines Visible (HLV)
• BHidden Lines Removed (HLR)
• CShaded
• DWireframe

If a drawing view's scale is set to 'Use sheet scale,' changing the sheet scale will:

• ALeave that view at its independent scale
• BRescale that view along with the sheet
• CDelete the view
• DConvert the view to a detail view

To show a part in a drawing in its as-machined configuration while the BOM still lists the casting (a different configuration), you would:

• ASet the view's referenced configuration to machined and set the BOM/table configuration g…
• BCreate two separate part files
• CUse a hole table
• DChange the sheet format

A General Table in a SOLIDWORKS drawing is best described as:

• AA flexible, manually populated table for custom data not produced by a BOM, hole, or revi…
• BAn automatically generated parts list
• CA table that always links to mass properties
• DA table reserved for weld symbols

A Hole Table in a SOLIDWORKS drawing reports:

• AThe assembly's bill of materials
• BSurface finish values
• CThe revision history
• DHole tags and their X/Y locations relative to a selected origin (datum)

When you delete a row in a SOLIDWORKS BOM that corresponds to a component still present in the assembly, SOLIDWORKS will:

• ADelete the component from the assembly
• BDelete the entire BOM
• CConvert the BOM to indented
• DHide that row but keep the component in the model; the row can be shown again

To exclude a particular component from the BOM count entirely (for example, a paint or a reference part), the most reliable component-level setting is:

• AMarking the component as 'Exclude from bill of materials' in its component properties
• BChanging the sheet scale
• CDeleting the part file
• DMoving it to a different layer

In SOLIDWORKS, the 'Keep Missing Item' / 'missing items' behavior in a BOM addresses the situation where:

• AA view is missing from the sheet
• BA dimension is over-defined
• CA previously listed component is no longer in the assembly, letting you keep or strike th…
• DA layer is turned off

The 'Item Number' column of a SOLIDWORKS BOM, when set to 'Detailed numbering' for an indented BOM, displays numbers such as 2.1, 2.2 to indicate:

• ASheet 2, view 1 and view 2
• BRevision 2 changes
• CChild components belonging to sub-assembly item 2
• DLayer assignments

To control which custom property feeds the 'PART NUMBER' column of a BOM when the component's file name differs from its desired part number, you set:

• AThe sheet format
• BThe 'Part number displayed when used in a bill of materials' option in the component's co…
• CThe view scale
• DThe drawing template units