In SOLIDWORKS MBD, what does the acronym PMI stand for?
Mbd Fundamentals
Question · Easy
Model Based Definition (MBD) is primarily intended to replace which traditional deliverable?
Which industry standard explicitly governs the digital product definition data practices that SOLIDWORKS MBD supports for 3D annotated models?
Question · Medium
Engineering Exam Prep Podcast
Listen on Spotify
Podcast
The DimXpert Auto Dimension Scheme allows you to choose the part type before generating dimensions. Which two part types are offered?
Dimxpert Tolerancing
When configuring the DimXpert Auto Dimension Scheme, which two tolerance types can be applied?
What is the maximum number of datums you can designate as reference features when running the DimXpert Auto Dimension Scheme?
In DimXpert, a 'Location Dimension' primarily defines what aspect of a feature?
Which DimXpert dimension type would you use to define the diameter of a cylindrical boss?
How is a reference dimension typically displayed to indicate it is non-controlling?
In the DimXpert Auto Dimension Scheme, the 'Scope' setting lets you choose to dimension which features?
Which DimXpert patterning options are available for the Auto Dimension Scheme?
An annotation view in SOLIDWORKS MBD is best described as what?
Annotation Views 3d Views
A SOLIDWORKS MBD '3D View' captures which of the following?
Where in the SOLIDWORKS interface are 3D Views captured and managed?
When you capture a 3D View, which option determines whether annotations from the current annotation views are shown?
Which output formats can SOLIDWORKS MBD publish a model and its captured 3D Views to?
Publishing 3d Pdf Edrawings
What primary purpose does an MBD 3D PDF template serve?
Which SOLIDWORKS MBD utility is used to create and edit 3D PDF templates?
Which of the following can be embedded as an attachment inside a published MBD 3D PDF?
To rotate and interact with the 3D model inside a published 3D PDF, the viewer typically must enable what?
Which document properties setting must be chosen first because it drives the available DimXpert symbols and tolerance behavior?
Mbd Templates Configuration
In DimXpert, what is the purpose of the 'General Profile Tolerance' option?
Question · Hard
What does the DimXpert 'Show Tolerance Status' tool indicate on a model?
The 'Flag Note Bank' in SOLIDWORKS MBD is used to do what?
Annotations Notes
Which DimXpert command can copy a complete dimensioning scheme from one feature or face to a similar one?
Besides ASME Y14.41, which ISO standard does SOLIDWORKS MBD support for digital product definition?
Which military standard for technical data packages does SOLIDWORKS MBD support?
In DimXpert, what is a 'datum feature' as opposed to a 'datum'?
Which DimXpert tool automatically recognizes geometry such as holes, slots, and pockets so they can be dimensioned as features?
When choosing a Geometric tolerance type in the Auto Dimension Scheme, which kind of model geometry is it especially recommended for?
What does a 'basic dimension' represent in GD&T-style DimXpert tolerancing?
Which GD&T control would DimXpert use to locate a hole relative to a datum reference frame?
In the Auto Dimension Scheme, what does selecting the 'Block Tolerance' method (versus General Tolerance) do?
A 'tolerance style' (favorite) in SOLIDWORKS lets you do what with DimXpert/dimension tolerances?
Why is capturing multiple 3D Views (e.g., front detail, hole-pattern detail) recommended before publishing a 3D PDF?
Which DimXpert dimension references a midplane to dimension symmetric features about a center?
What is 'intersection geometry' as used in DimXpert dimensioning?
When you reorder 3D Views before publishing, what does the sequence control in the output 3D PDF?
Which statement about eDrawings published from MBD is correct?
In a 3D PDF template, what is a 'view tab'?
Which of these is a valid reason to use a General (overall) profile note instead of individually toleranced surfaces?
What is the minimum SOLIDWORKS version generally required to take the CSWP-MBD exam?
Exam Logistics
How long is the minimum waiting period between CSWP-MBD exam attempts?
The CSWP-MBD exam format is best characterized as which of the following?
To take CSWP-MBD, which credential is the recommended prerequisite demonstrating core SOLIDWORKS proficiency?
Which DimXpert element is required so a published 3D model can be inspected without ambiguity, satisfying the MBD goal of a complete definition?
In MBD, what does a 'datum reference frame' (DRF) provide?
Loading more…