CSWP-CAM: Certified SOLIDWORKS Professional — CAM

In SOLIDWORKS CAM, what is the primary role of the Technology Database (TechDB)?

• AIt stores cutting tools, machining strategies, feeds, and speeds that are applied automat…
• BIt records the part's revision history for PDM purposes
• CIt converts SLDPRT files into neutral STEP geometry
• DIt performs finite element stress analysis on the toolpath

Which statement best describes Automatic Feature Recognition (AFR) in SOLIDWORKS CAM?

• AIt automatically selects the correct CNC machine based on part size
• BIt scans the solid model and automatically identifies machinable 2.5-axis features such a…
• CIt generates the post-processed G-code without an operation plan
• DIt recognizes only surfaces that require 5-axis simultaneous machining

When AFR fails to recognize a complex multi-surface region, which tool is used to define that machinable feature?

• AThe Hole Wizard
• BThe Draft Analysis tool
• CThe Interactive Feature Recognition (IFR) wizard
• DThe Move/Copy Bodies command

In the Define Machine dialog, what must be selected so that toolpaths are calculated and posted correctly for a milling job?

• AOnly the stock material type
• BThe drawing sheet format
• CA SOLIDWORKS appearance for the part
• DAn active mill machine definition plus its matching controller/post processor

Which methods can be used to define the stock in SOLIDWORKS CAM for a milling part?

• AOnly a cylindrical bar definition
• BBounding box, extruded sketch, STL file, or an existing part/coordinate-system-based block
• COnly by importing a Simulation mesh
• DStock cannot be defined and is always inferred at post time

The Mill Part Setup coordinate system in SOLIDWORKS CAM determines which of the following?

• AThe color of the rendered toolpath lines
• BThe material density used for mass properties
• CThe program zero (origin) and the Z-axis cutting direction used for the toolpaths
• DThe drawing view orientation only

On a standard 3-axis vertical mill, the Z axis of the Mill Part Setup should point in which direction?

• AParallel to the longest edge of the stock
• BInto the part toward the table
• CAlong the X axis of the machine
• DOut of the part, normal to the top machining plane (the spindle/tool direction)

After machinable features exist, which command populates them with default machining operations from the TechDB?

• AGenerate Operation Plan
• BRebuild
• CInsert Component
• DCheck Sketch for Feature

Which sequence correctly represents the typical SOLIDWORKS CAM milling workflow?

• AGenerate toolpaths → define stock → recognize features → simulate → define machine
• BPost-process → simulate → generate operation plan → define machine
• CDefine machine/stock/coordinate system → extract features → generate operation plan → gen…
• DSimulate → generate toolpaths → define coordinate system → extract features

What does Generate Toolpaths compute for each operation?

• AThe bill of materials for the assembly
• BThe exploded view animation
• CThe sheet-metal flat pattern
• DThe actual tool motion (cut, lead-in/out, links, retracts) based on the operation paramet…

Which roughing operation removes the bulk of material from a pocket in level-based passes?

• ARough Mill
• BThread Mill
• CCenter Drill
• DEngrave

Which operation is normally used to finish the vertical walls of a pocket to final size after roughing?

• AFace Mill
• BContour Mill
• CTap
• DBore

For a hole feature requiring a tapped thread, which operation order is correct in SOLIDWORKS CAM?

• ATap → Drill → Center Drill
• BReam → Tap → Center Drill
• CBore → Tap → Drill
• DCenter Drill → Drill → Tap

What is the purpose of toolpath simulation in SOLIDWORKS CAM?

• ATo verify the tool motion, stock removal, gouges, and collisions before posting NC code
• BTo export the part as a STEP file
• CTo create the engineering drawing
• DTo run a thermal analysis of the cutting tool

What does the post processor do when you Post Process the toolpaths?

• AIt recognizes new machinable features
• BIt converts the calculated toolpaths into machine-specific NC (G-code) for the selected c…
• CIt rebuilds the SOLIDWORKS part geometry
• DIt generates the stock bounding box

In posted NC output, which G-code commonly represents the first work coordinate offset tied to the Mill Part Setup origin?

• AG28
• BG02
• CG54
• DG90

What is the function of an Avoid Area defined on a Mill Part Setup?

• AA region the toolpath must stay out of, such as a clamp or fixture location
• BA region that forces deeper cutting depths
• CA label that changes the part color
• DA note added to the drawing

A Contain Area on a setup is used to:

• AIncrease spindle speed automatically
• BLimit machining to only the region inside a defined boundary
• CDelete recognized features
• DSet the post processor file path

Which feature type is best machined with an Engrave operation?

• AA deep through pocket requiring bulk removal
• BA tapped M10 hole
• CShallow text or a sketched line profile, such as a part number on a face
• DA large face that needs flattening

A Corner Round (corner rounding) milling operation in SOLIDWORKS CAM is used to:

• ADrill a precise center hole
• BCut external threads
• CGenerate the stock from an STL
• DMachine a radius (fillet) along an edge of the part

A Chamfer milling operation typically uses which tool to break an edge at an angle?

• AA ball-end mill
• BA chamfer (countersink/angled) tool
• CA center drill only
• DA face mill

Waterjet, plasma, and laser machining in SOLIDWORKS CAM are categorized as which type of process?

• A5-axis simultaneous surface machining
• BSingle-point turning operations
• C2-axis profiling/cutting of flat stock driven by sketch or profile geometry
• DAdditive deposition processes

After editing the part geometry, why might SOLIDWORKS CAM mark operations or toolpaths as out of date?

• ABecause the TechDB was deleted
• BBecause the machine post was uninstalled
• CBecause the drawing sheet was rotated
• DBecause the design change broke the associativity, so features and toolpaths must be rege…

Where is the localized list of tools available to a specific part file maintained in SOLIDWORKS CAM?

• AThe tool crib associated with the active machine in that part
• BThe SOLIDWORKS material library
• CThe assembly mate references
• DThe drawing's general table

Which parameters are set in an operation to control material removal rate and surface finish?

• ADrawing scale and sheet size
• BMate alignment and offset distance
• CSpindle speed, feed rate, depth of cut, and stepover
• DAppearance and decal mapping

Which add-in must be active in SOLIDWORKS for the CommandManager CAM tabs (Features, Operations) to appear?

• APhotoView 360
• BToolbox
• CSOLIDWORKS Motion
• DSOLIDWORKS CAM

What distinguishes SOLIDWORKS CAM Standard from SOLIDWORKS CAM Professional regarding mill capability?

• AStandard focuses on 2.5-axis milling plus limited 3-axis (area clear, Z-level, flat area)…
• BStandard supports only 5-axis simultaneous toolpaths
• CStandard cannot generate any toolpaths
• DStandard is for additive manufacturing only

A 2.5-axis machinable feature is best described as a feature that:

• ARequires continuous 5-axis tool tilting
• BHas a constant cross-section along the Z depth (vertical or tapered walls) and a flat or…
• CCan only be cut by a lathe
• DHas no recognizable geometry

Which strategy is associated with a recognized pocket feature so the correct default operations are applied?

• AThe sheet-metal K-factor
• BThe exploded line sketch
• CThe drawing revision block
• DA machining strategy stored in the TechDB that maps the feature to rough and finish opera…

When you Extract Machinable Features, which setting determines whether features are organized by their machining direction?

• AThe recognition method/setup direction (the part is grouped into setups by tool approach…
• BThe part appearance
• CThe mass property override
• DThe sketch plane color

A part requires machining from both the top and the bottom. How does SOLIDWORKS CAM typically handle this?

• AIt machines everything from a single fixed direction regardless of geometry
• BIt creates separate Mill Part Setups for each approach direction, each with its own coord…
• CIt refuses to recognize bottom features
• DIt posts two G-code lines and stops

What does a positive Allowance (stock-to-leave) value on a roughing operation accomplish?

• AIt removes extra material beyond the part boundary
• BIt increases the spindle speed
• CIt leaves a thin layer of material on walls and floor for a subsequent finishing pass
• DIt deletes the finishing operation

Which tool is most appropriate for a Center Drill (spot) operation before drilling?

• AA center drill or spot drill to create a starting cone that guides the twist drill
• BA face mill
• CA thread mill
• DA ball-end mill

A Peck Drilling cycle is used primarily to:

• AMill a flat face
• BDrill deep holes by retracting periodically to clear chips
• CCut an internal thread
• DChamfer an edge

Which operation produces a precise hole diameter and fine surface finish by removing a small amount of material from an existing drilled hole?

• ARough Mill
• BEngrave
• CReam
• DFace Mill

What is the main advantage of a Boring operation over drilling for a large hole?

• AIt removes material faster from solid stock
• BIt cuts threads automatically
• CIt engraves the hole number
• DIt achieves better roundness, position, and size accuracy on an existing hole

Face Milling is most commonly used to:

• ADrill a tapped hole
• BMachine the top face of the stock flat and to a clean reference height
• CCut a chamfer on an edge
• DEngrave a logo

Thread Milling differs from tapping in that it:

• ACan only cut external threads
• BRequires no toolpath
• CUses a rotating multi-point thread cutter that helically interpolates, suiting a range of…
• DAlways produces blind-hole threads only

What does an Operation Plan represent in the SOLIDWORKS CAM tree?

• AThe physical CNC machine's maintenance log
• BThe SOLIDWORKS sketch relations
• CThe PDM check-in history
• DThe ordered list of machining operations and their parameters generated for the recognize…

Why would a programmer reorder operations within a setup before generating toolpaths?

• ATo optimize the machining sequence, minimize tool changes, and ensure roughing precedes f…
• BTo change the part's mass
• CTo rename the SOLIDWORKS document
• DTo alter the drawing title block

Combining two recognized features (for example merging two coplanar pockets) before generating operations is done to:

• AIncrease the number of tool changes
• BDelete one of the pockets from the model
• CProduce a single continuous toolpath that is more efficient than separate ones
• DConvert them to sheet metal

In simulation, a collision warning between the tool holder and the part most likely means:

• AThe post processor is missing
• BThe stock material is undefined
• CThe drawing is not detailed
• DThe tool stick-out (gauge length) is too short for the cut depth, so the holder would cra…

What is the function of the Step Through Toolpath (or single-step) mode in simulation?

• AIt advances the simulation one move at a time so the programmer can inspect individual cu…
• BIt posts the NC code
• CIt deletes the operation
• DIt changes the work offset to G55

A posted NC program begins with a tool change to T01 and an M06. What does M06 command?

• ASpindle on clockwise
• BExecute the tool change (load the called tool into the spindle)
• CCoolant off
• DProgram end and rewind

Which M-code typically turns the spindle on in the clockwise direction in posted output?

• AM05
• BM08
• CM30
• DM03

In G-code, which pair sets the motion to absolute positioning and to inch units respectively?

• AG90 and G20
• BG91 and G21
• CG54 and G28
• DG02 and G03

What is the purpose of the Save Operation Plan capability to the TechDB?

• ATo export the part as a PDF
• BTo store a proven sequence of operations/parameters so similar future parts reuse the sam…
• CTo overwrite the post processor
• DTo convert the model to an assembly