BCSP SMP Safety Management Professional (formerly SMS)

A safety professional calculates that the probability of a specific incident occurring is 0.15 per year. What is the probability that this incident will NOT occur in a given year?

• A0.15
• B0.85
• C1.15
• DCannot be determined

A company has 150 recordable injuries out of 2,500 employees working 2,000 hours each. What is the Total Recordable Incident Rate (TRIR)?

• A3.0
• B6.0
• C15.0
• D30.0

At 25°C, a dilute aqueous solution has hydrogen-ion concentration 1 × 10⁻⁹ mol/L. What is its pH?

• ApH 5
• BpH 7
• CpH 9
• DpH 11

A fixed quantity of gas in a movable-piston cylinder stays at constant pressure. If its absolute temperature doubles (in kelvin), what happens to its volume?

• AThe volume is halved under constant pressure
• BThe volume stays the same in the piston cylinder
• CThe volume doubles under constant pressure
• DThe volume quadruples as temperature doubles

A risk team compares vehicle impact energy at two speeds for the same vehicle mass. Which formula should it use?

• AKE = mv
• BKE = ½mv²
• CKE = mgh
• DKE = F × d

The LD₅₀ value of a toxic substance represents:

• AThe lethal dose for 50% of test animals
• BThe lowest dose causing death
• CThe dose causing toxic symptoms in 50% of test animals
• DThe maximum allowable exposure limit

A construction worker using a personal fall arrest system has a combined body-and-tools weight of 310 lb. Which design check is especially important under OSHA construction rules?

• AUse the usual appendix test unchanged for this worker
• BModify test criteria for a worker weighing 310 pounds
• CPermit six feet of deceleration for the heavier worker
• DUse anchor strength alone as proof of system fit

A plant wants to make safety controls consistent across production, maintenance and purchasing. What is the main value of a safety management system?

• AUse one checklist for all tasks regardless of differences
• BIntegrate responsibilities and continual improvement into operations
• CDelegate every safety decision to the safety department
• DReplace field verification with a policy statement

A plant manager asks supervisors to meet production targets while also protecting workers during machine jams. Which leadership action most supports a positive safety culture?

• AModel stop-work decisions and resource a safer jam-clearing method
• BPraise high output while leaving jam controls to individual choice
• CDiscuss safety only after a recordable injury occurs
• DSet a safety target without reviewing production pressures

A designer can change a product so it no longer needs a solvent cleaning step before assembly. Which control is this?

• AAdministrative rotation during solvent cleaning
• BVentilation around the existing solvent tank
• CElimination of the solvent-cleaning task by design
• DSubstitution with a less volatile cleaning solvent

A company designs safety training for a new machine. Which feature best supports an effective program under ANSI/ASSP Z490.1 principles?

• AUse attendance records as the only success measure
• BSet performance objectives and assess task competence
• CChoose course length before analyzing the job hazard
• DUse one delivery format for every worker and task

In the context of safety management, what does the term "safety climate" refer to?

• AAn individual worker's personal preference for PPE
• BWorkers' shared perception of how safety is prioritized now
• CThe written safety policy without evidence of practice
• DThe rate of injuries recorded in the prior year

A plant conducts monthly proof tests of safety-critical interlocks. Which measure is the most useful leading indicator?

• AAnnual injury rate for operators near the equipment
• BPercentage of interlock tests completed on schedule
• CWorkers' compensation cost for past machine injuries
• DNumber of machines purchased during the year

What is the primary focus of Behavior-Based Safety (BBS) programs?

• AAuditing procedural compliance
• BObserving work and giving feedback
• CRedesigning process equipment
• DAnalyzing injury events after occurrence

In the context of competency assessment, what is "validity"?

• AReliability across repeated administrations
• BAccuracy in measuring the intended skill
• CEase of administering the test
• DConsistency of scores between raters

A design team ranks a proposed hazard by likelihood and severity. What should it do before selecting a control?

• ARank only by historical frequency
• BReview exposure, consequences and controls
• CChoose the lowest purchase-price control
• DWait until an injury confirms severity