Rhode Island Crane Operator

Under Rhode Island General Laws Title 28, Chapter 26, who administers the hoisting engineer licensing program?

• ARI Department of Transportation
• BRI Dept of Labor and Training, Division of Professional Regulation, Board of Examiners of…
• COSHA Region 1 Office
• DRI Building Commissioner

What is the passing score required on the Rhode Island hoisting engineer written exam?

• A60%
• B65%
• C70%
• D80%

What does RI hoisting engineer License Code 140 authorize the holder to operate?

• ALattice boom cranes only
• BHydraulic cranes only
• CAll hoisting and excavating equipment (Full License)
• DAerial lifts only

What experience prerequisite must an applicant meet to obtain a Rhode Island Full License (Code 140)?

• ANo prior experience required
• B6 months of crane operation in any state
• CAt least 2 years of prior RI hoisting engineer licensing
• DNCCCO certification

Which medical document must applicants for Rhode Island Full, Lattice Crane, or Hydraulic Crane licenses submit?

• AState-issued health card
• BValid DOT Medical Certificate
• CHospital discharge summary
• DWorkers' compensation clearance letter

How often must a Rhode Island hoisting engineer license be renewed?

• AEvery year
• BEvery 2 years, expiring on the holder's birthday
• CEvery 3 years
• DEvery 5 years

What is the non-refundable application fee for a Rhode Island hoisting engineer license?

• A$50
• B$75
• C$100
• D$150

RI License Code 141 authorizes the holder to operate which type of equipment?

• AAll hoisting equipment
• BHydraulic cranes
• CLattice boom cranes
• DAerial lifts only

What type of application does Rhode Island require for hoisting engineer licensure?

• AOnline application only
• BNotarized application with company letterhead experience verification
• CVerbal application at the exam site
• DStandard non-notarized form

How frequently are RI hoisting engineer written exams administered?

• ADaily at testing centers
• BWeekly
• CMonthly, in person
• DQuarterly

RI License Code 142 authorizes the holder to operate which type of equipment?

• ALattice boom cranes
• BHydraulic cranes
• CTower cranes
• DAll hoisting equipment

Before starting any crane lift, what is the FIRST action the operator should take?

• AAttach the load immediately
• BPerform a pre-operation inspection of the crane
• CSignal the rigger to begin
• DExtend the boom to maximum length

When setting up a crane near overhead power lines, what is the minimum safe approach distance for lines rated up to 50 kV according to OSHA standards?

• A5 feet
• B10 feet
• C15 feet
• D20 feet

What is the primary purpose of outrigger pads on a mobile crane?

• ATo raise the crane higher for better visibility
• BTo distribute the crane's load over a larger ground area and prevent sinking
• CTo act as a leveling device for uneven terrain only
• DTo anchor the crane to the ground

What does 'net capacity' mean on a crane load chart?

• AThe maximum load the crane can ever lift
• BThe gross capacity minus the weight of rigging, hook block, and any attachments below the…
• CThe weight of the crane itself
• DThe capacity at maximum boom extension

A crane operator notices the wire rope has 6 broken wires in one lay length on a running rope. What should the operator do?

• AContinue operating but monitor the rope closely
• BRemove the rope from service immediately
• CApply lubricant and continue
• DReduce the load by 25% and keep working

What is the standard hand signal for 'HOIST' (raise the load)?

• AArm extended horizontally with index finger pointing down, moving hand in a circle
• BForearm vertical with index finger pointing up, moving hand in small horizontal circles
• CBoth arms extended outward, palms down
• DOne arm extended forward, palm facing down

Under RI regulations, what happens if a hoisting engineer operates equipment outside the scope of their license code?

• ANothing, as long as the job is completed safely
• BThe operator may face disciplinary action, fines, and potential license revocation by the…
• CA verbal warning from the employer is sufficient
• DThe operator's insurance covers any incidents

What is the purpose of a load moment indicator (LMI) on a crane?

• ATo measure wind speed only
• BTo warn the operator when the crane approaches its tipping point based on load and radius
• CTo automatically level the crane
• DTo count the number of lifts performed

When reading a crane load chart, what happens to the rated capacity as the operating radius increases?

• ACapacity increases
• BCapacity stays the same
• CCapacity decreases
• DCapacity doubles

Which type of hitch provides the MOST lifting capacity from a sling?

• AChoker hitch
• BVertical hitch
• CBasket hitch
• DAll hitches provide equal capacity

A crane is rated at 50 tons at a 30-foot radius. The hook block weighs 1,500 lbs, and the rigging weighs 500 lbs. What is the maximum payload the crane can lift?

• A50 tons
• B49 tons
• C48 tons
• D47 tons

What is the recommended study reference for the RI hoisting engineer exam that covers mobile crane operations?

• AOSHA 30-Hour Construction Manual
• B'Mobile Craning Today' by DH Campbell
• CMachinery's Handbook
• DRI Building Code Manual

What is the minimum number of wraps of wire rope that must remain on the drum when the hook is at its lowest point?

• A1 wrap
• B2 wraps
• C3 wraps
• D5 wraps

What is the purpose of a pre-lift meeting (job hazard analysis) before a crane operation?

• ATo assign blame if something goes wrong
• BTo identify hazards, review the lift plan, and ensure all personnel understand their roles
• CTo test the crane's maximum capacity
• DTo satisfy insurance requirements only

On a lattice boom crane (RI Code 141), what structural component primarily supports the boom against compression forces?

• AThe counterweight
• BThe lattice chord members (main boom sections)
• CThe wire rope hoist line
• DThe outrigger floats

When two slings are used in a basket hitch at a 60-degree angle from horizontal, what percentage of the sling's rated capacity is available per leg?

• A50%
• B75%
• C86.6%
• D100%

What should an operator do if they receive a 'STOP' signal from anyone on the job site, not just the designated signal person?

• AIgnore it unless it comes from the signal person
• BStop the crane immediately
• CSlow down but continue the lift
• DAsk the supervisor for permission to stop

What does 'two-blocking' mean in crane operations?

• AUsing two cranes for a tandem lift
• BThe headache ball or hook block contacts the boom tip sheave, potentially causing structu…
• CSetting two sets of outriggers
• DOperating at twice the rated capacity

Which Rhode Island hoisting engineer license authorizes operation of both hoisting and excavating equipment?

• ACode 141 (Lattice Crane) only
• BCode 142 (Hydraulic Crane) only
• CCode 140 (Full License)
• DCode 143 (Aerial Lift) only

A hydraulic crane (RI Code 142) has outriggers that are not fully extended. How does this affect the load chart?

• AThe standard load chart still applies
• BThe operator must use the reduced capacity chart for the actual outrigger position, if av…
• CCapacity increases because the crane is more compact
• DThe operator should estimate a 10% reduction

What is the function of a boom angle indicator on a crane?

• ATo measure wind speed at the boom tip
• BTo show the angle of the boom relative to horizontal for load chart reference
• CTo indicate the direction the boom is pointing
• DTo control the boom extension speed

What is the primary risk of operating a crane on soft or uncompacted ground?

• AFaster wear on the tires
• BGround failure under the outrigger or track, leading to crane instability or tipping
• CIncreased fuel consumption
• DDifficulty swinging the boom

When performing a critical lift (planned heavy or complex lift), what document should be prepared and reviewed before beginning?

• ADaily weather report
• BA detailed lift plan including load weight, radius, capacity, rigging, and crane configur…
• CEquipment rental agreement
• DThe crane's purchase receipt

What is the correct procedure when the crane operator cannot see the load or the landing zone?

• AContinue the lift slowly and carefully
• BUse a qualified signal person who has a clear view of the load and landing area
• CRely on the load moment indicator only
• DAsk a bystander to guide the load

What should an operator check regarding the wire rope reeving before making a lift?

• AOnly the rope diameter
• BThat the rope is properly reeved through sheaves, not crossed or twisted, and the correct…
• COnly the color of the rope
• DThat the rope was installed within the last month

In Rhode Island, can a person operate hoisting equipment commercially without a valid state license?

• AYes, if they have an employer's permission
• BYes, if they have NCCCO certification
• CNo, RI General Laws 28-26 requires a valid state hoisting engineer license
• DYes, for equipment under 10 tons

What is the effect of wind on crane operations?

• AWind has no effect on crane capacity
• BWind increases crane capacity by helping support the load
• CWind increases side loading, reduces stability, and can cause the load to swing uncontrol…
• DWind only affects cranes over 100 tons

How does increasing the number of parts of line affect a crane's lifting capacity?

• AIt has no effect on capacity
• BIt decreases capacity
• CIt increases the rated capacity because more rope shares the load
• DIt only affects the speed of the hoist

What type of inspection must be performed on a crane before each shift?

• AAnnual inspection only
• BPre-shift visual and functional inspection
• CStructural x-ray
• DNo inspection is required if the crane worked the previous day

What is the standard hand signal for 'LOWER' (lower the load)?

• AForearm vertical, index finger pointing up, circling hand
• BArm extended downward with index finger pointing down, moving hand in small circles
• CBoth arms waving overhead
• DArm extended horizontally, thumb pointing up

A shackle used in rigging has a Working Load Limit (WLL) of 5 tons. What is the approximate breaking strength if the safety factor is 5:1?

• A10 tons
• B15 tons
• C20 tons
• D25 tons

What is the purpose of an anti-two-block device on a crane?

• ATo prevent the crane from traveling on two tracks simultaneously
• BTo stop the hoist drum before the hook block contacts the boom tip, preventing wire rope…
• CTo prevent two cranes from working in the same area
• DTo limit the crane to two lifts per hour

When is a crane operator required to stop operations due to lightning?

• AOnly when lightning strikes within 100 feet
• BWhen lightning is observed within the area or thunder is heard, operations should cease i…
• CLightning does not affect crane operations
• DOnly when the dispatcher gives the order

What does 'side loading' mean in crane operations, and why is it dangerous?

• ALoading the crane from the side of the truck — it is more efficient
• BApplying a horizontal force to the boom that it is not designed to withstand, potentially…
• CPlacing the load on one side of the hook — it is a normal practice
• DOperating the crane on a hillside — it is standard procedure