Moldova Driving Theory Test — Category A / AM (Motociclete și Mopede)

Under the Moldovan Road Traffic Regulations (RCR), what does an octagonal red sign with the white inscription 'STOP' (Indicatorul 2.2 'Trecerea fără oprire interzisă') require a motorcyclist to do at an intersection?

• ACome to a complete stop before the stop line or intersection edge and yield to all vehicl…
• BSlow down to a walking pace and proceed without stopping if no vehicles are visible from…
• CCome to a complete stop only if vehicles are approaching from the right-hand side
• DYield priority only to heavy goods vehicles and emergency services while maintaining forw…

What is the legal meaning of an inverted triangular road sign with a red border and white background (Indicatorul 2.1 'Cedează trecerea') for a rider approaching a junction?

• AThe rider must yield right of way to vehicles approaching on the intersecting road, stopp…
• BThe rider has absolute right of way over all traffic entering from side streets
• CThe rider must come to a mandatory complete stop even if no other vehicle is in sight
• DThe rider is entering a one-way street where overtaking on the right is permitted

At an uncontrolled intersection of roads of equal status (intersecție cu circulație nedirijată), which priority rule governs two motorcycles approaching on crossing paths?

• AThe rider must yield to any vehicle approaching from the right-hand side ('regula priorit…
• BThe rider travelling at higher speed takes priority across the junction
• CThe rider approaching from the wider paved surface always has priority regardless of sign…
• DThe rider who sounds their horn first gains right of way

When entering a roundabout marked with sign 4.3 'Circulație giratorie' and sign 2.1 'Cedează trecerea', how must a motorcyclist navigate right of way?

• AYield right of way to all vehicles already circulating within the roundabout
• BTake priority over vehicles already inside the ring based on the standard right-hand rule
• CAccelerate ahead of circulating vehicles if entering from a multi-lane boulevard
• DStop in the center of the entrance lane until the roundabout is entirely empty of all tra…

What does a traffic light displaying a flashing yellow signal indicate to a motorcyclist approaching an intersection?

• AThe traffic light system is unregulated or out of service; proceed with caution following…
• BThe light is about to turn red within exactly two seconds; an emergency stop is required
• CAll vehicles must stop and wait for a green arrow before turning right
• DPedestrian crossing only; vehicular traffic is prohibited from proceeding

A police traffic officer (agent de circulație) stands in the center of an intersection with arms outstretched horizontally to the sides. For a motorcyclist facing the officer's chest, what action is required?

• AStop and remain stopped; traffic facing the officer's chest or back is prohibited from mo…
• BProceed straight ahead or turn right, yielding only to crossing pedestrians
• CPerform an immediate U-turn before reaching the officer
• DProceed through the intersection at reduced speed with headlights flashing

When an authorized emergency vehicle approaches with flashing blue lights and an active siren, what must a motorcycle rider do?

• AClear the lane immediately, pulling over to the right edge of the roadway and stopping if…
• BAccelerate to clear the upcoming intersection ahead of the emergency vehicle
• CMaintain current speed and lane position because two-wheelers have a narrow profile
• DMove to the left-hand median to allow the emergency vehicle to pass on the right

If an emergency convoy is escorted by a police vehicle displaying simultaneous flashing red and blue lights, what specific duty is imposed on oncoming and following drivers?

• APull over to the right side of the roadway or onto the shoulder and come to a complete st…
• BReduce speed by 10 km/h and continue driving without overtaking
• CTurn on hazard warning flashers and proceed across the nearest intersection
• DYield only if driving a heavy commercial vehicle or bus

What does a circular white sign with a red border containing the number '50' (Indicatorul 3.27 'Viteza maximă limitată') signify?

• AThe maximum speed allowed on that road section is 50 km/h
• BDrivers must maintain a minimum speed of at least 50 km/h
• CThe recommended speed in optimal weather conditions is 50 km/h
• DThe distance to the next urban built-up area is 50 kilometers

What does sign 3.2 'Acces interzis' (a red circle with a horizontal white bar, commonly known as 'no entry') mean for a motorcycle rider?

• AEntry is prohibited for all vehicles from this direction
• BEntry is prohibited only for multi-track four-wheeled vehicles
• CMotorcycles under 125 cm³ may enter if pedaled or pushed with engine running
• DEntry is allowed during daytime hours between 08:00 and 20:00

What is the meaning of sign 3.5 'Circulația motocicletelor interzisă' (a white circle with red border displaying a motorcycle silhouette)?

• AProhibits the circulation of motorcycles of all categories
• BProhibits passenger cars from overtaking motorcycles on that road
• CMandates that motorcycle riders must dismount and push their vehicle on the sidewalk
• DWarns of high motorcycle collision risk ahead

What is indicated by a continuous longitudinal white center line (Marcajul 1.1) on a two-lane road?

• ACrossing or straddling the line is prohibited, including during overtaking maneuvers
• BMotorcycles may cross the line freely if oncoming traffic is more than 100 meters away
• CThe line separates lanes travelling in the same direction and can be crossed when turning
• DThe line marks a temporary detour where overtaking is recommended

What does a broken longitudinal line with long dashes and short intervals (Marcajul 1.6 'Linie de avertizare') warn the rider about?

• AAn approaching solid line (1.1) or hazardous road section is imminent
• BA pedestrian crossing zone where parking is permitted
• CThe road is widening into a three-lane dual carriageway
• DAn upcoming toll collection plaza on an international corridor

At a signalized intersection, what does an additional green arrow illuminated alongside a red main traffic signal mean for a motorcyclist wishing to turn in the arrow's direction?

• AThe rider may turn in the direction of the arrow but must yield to pedestrians and all ot…
• BThe rider has absolute right of way to turn and crossing traffic will be halted
• CThe rider must stop until the main signal changes to green before following the arrow
• DThe arrow applies only to public transit buses and heavy trucks

When turning left at an intersection where oncoming traffic has a green light, how must a motorcyclist execute the turn under RCR rules?

• AAdvance into the intersection and yield to oncoming vehicles travelling straight or turni…
• BAccelerate aggressively across the intersection to turn ahead of oncoming vehicles
• CTurn immediately on the inside line without entering the center of the intersection
• DOncoming vehicles are legally required to yield to any vehicle already signaling a left t…

What is the general legal speed limit for motorcycles (Category A) in built-up areas (localități) in the Republic of Moldova, unless signs indicate otherwise?

• A50 km/h
• B60 km/h
• C70 km/h
• D40 km/h

What is the maximum permissible speed for a motorcycle (Category A) on roads outside built-up areas (drumuri în afara localităților) other than motorways or expressways?

• A90 km/h
• B100 km/h
• C80 km/h
• D110 km/h

What is the maximum legal speed for a beginner motorcycle rider with less than 1 year of experience when operating outside built-up areas in Moldova?

• A70 km/h
• B80 km/h
• C90 km/h
• D60 km/h

Under the Moldovan RCR, what is the maximum speed permitted in designated residential zones (zone rezidențiale, marked by sign 5.56) and pedestrian zones?

• A20 km/h
• B30 km/h
• C15 km/h
• D25 km/h

Under what condition is overtaking (depășirea) strictly prohibited for a motorcycle rider on a two-lane road?

• AOn pedestrian crossings and within 50 meters before railway level crossings
• BOn straight road sections with clear visibility of more than 500 meters
• CPast agricultural tractors travelling at less than 30 km/h where broken lines exist
• DPast single-track bicycles riding along the right curb

What is the minimum legal distance from a public transport bus or trolleybus stop within which parking or stopping is prohibited in Moldova?

• AWithin 25 meters of the marked stop or indicator sign 5.41/5.42
• BWithin 10 meters of the stop sign
• CWithin 50 meters before the stop and 15 meters after
• DWithin 5 meters of the stop shelter

How far before an unsignalized pedestrian crossing (trecere pentru pietoni) is stopping prohibited under RCR rules?

• AWithin 5 meters before the pedestrian crossing
• BWithin 15 meters before the crossing
• CWithin 25 meters before the crossing
• DStopping is permitted right up to the white zebra stripes if hazard lights are on

What is the minimum distance from an intersection edge where stopping or parking a motorcycle on the roadway is permitted?

• AAt least 15 meters from the crossing edge or curve of the intersection
• BAt least 5 meters from the intersection corner
• CAt least 25 meters from any side street
• DMotorcycles may park directly at the corner due to their compact size

What does triangular warning sign 1.22 'Pietoni' (pedestrians) alert a motorcycle rider to expect?

• AApproaching a road section where children or pedestrians frequently cross or walk along t…
• BA dedicated pedestrian street where vehicular traffic is strictly banned
• CA pedestrian footbridge crossing over the motorway ahead
• DA mandatory pedestrian registration checkpoint

What is the requirement regarding motorcycle headlights during daytime driving on Moldovan public roads?

• AMotorcycles and mopeds must always have their dipped-beam headlight (faza scurtă) or dayt…
• BHeadlights are only required between November 1 and March 31 during daylight
• CHeadlights are optional during daylight unless ambient temperature drops below freezing
• DRiders must only use high-beam headlights (faza lungă) during the day to ensure visibility

Under Moldovan legislation and RCR technical standards, what is the mandatory requirement for protective helmets on motorcycles and mopeds?

• ABoth the rider and passenger must wear a homologated protective helmet fastened securely…
• BHelmets are mandatory only for the rider, while passengers over 18 may ride without one
• CHelmets are required only outside built-up areas where speeds exceed 50 km/h
• DA construction hard hat or bicycle helmet meets the legal requirement for mopeds

What is the minimum legal tire tread depth for motorcycles (Category A, A1, A2) under Moldovan technical vehicle inspection standards?

• A0.8 mm
• B1.6 mm
• C1.0 mm
• D2.0 mm

Why is the use of an approved visor or motorcycle eye protection essential while riding at highway speeds?

• AIt prevents insects, dust, and wind blast from causing involuntary eye closure or cornea…
• BIt is solely required to prevent sunburn on the upper facial tissues
• CIt magnifies peripheral road signs and roadway markings at night
• DIt acts as a primary mounting bracket for mandatory communication devices

What is the primary danger of wearing a tinted (dark smoke or mirrored) helmet visor while riding after sunset or in darkness?

• AIt drastically reduces light transmission, impairing the rider's ability to identify unli…
• BIt causes the motorcycle's electrical charging system to overload through sensor feedback
• CIt reflects the motorcycle's own speedometer back onto the road surface
• DIt increases aerodynamic drag and causes rapid neck muscle fatigue

When checking motorcycle drive chain tension during a pre-trip inspection, what is the typical recommended vertical slack in the middle of the lower run?

• AApproximately 20 to 30 mm (or as specified by the motorcycle manufacturer's manual)
• BZero slack; the chain must be pulled completely taut like a guitar string
• CAt least 70 to 80 mm so the chain can clear the swingarm pivot
• DChain slack cannot be measured without removing the rear tire

What is the consequence of operating a motorcycle with severely under-inflated tires?

• ASluggish steering response, excessive tire sidewall flexing, overheating, and potential b…
• BIncreased fuel efficiency and significantly shortened emergency stopping distances
• CReduced brake pad wear and lighter handlebars at low speeds
• DComplete prevention of aquaplaning on standing water

What type of footwear provides optimal protection for motorcycle riders according to safety standards?

• ASturdy over-the-ankle leather boots with non-slip soles and reinforcement at the ankle bo…
• BCanvas athletic running shoes with soft rubber soles for sensitive pedal feel
• CSandals with rear heel retention straps to ensure ventilation
• DHeavy steel-toed construction boots that restrict all ankle flex

Why are specialized motorcycle gloves with palm sliders and knuckle armor considered mandatory protective equipment by road safety experts?

• AIn a fall, humans instinctively extend their hands to break the fall; reinforced gloves p…
• BThey are solely needed to operate heated handlebar grips in winter
• CThey ensure that the clutch lever cannot be pulled in too quickly
• DThey allow the rider to signal turns without using the motorcycle's direction indicators

What is the purpose of the engine cut-off kill switch located on the right handlebar control cluster of a motorcycle?

• ATo shut off the engine instantly in an emergency without having to remove the hand from t…
• BTo lock the steering mechanism while driving at low speeds
• CTo reset the digital odometer and fuel consumption gauge
• DTo disconnect the motorcycle's battery charging circuit during rain

Before riding a motorcycle that has been stored for several weeks, which fluid levels must be checked during the pre-ride inspection?

• AEngine oil level, brake fluid in both master cylinders, and coolant (for liquid-cooled en…
• BWindshield washer fluid and power steering hydraulic fluid
• CAutomatic transmission torque converter fluid only
• DFluid checks are unnecessary on modern motorcycles equipped with electronic fuel injection

What is indicated if the brake lever feels spongy and pulls all the way back to the handlebar grip when squeezed?

• AAir has entered the hydraulic brake lines, requiring immediate bleeding and inspection be…
• BThe brake pads are completely new and require breaking in over 500 kilometers
• CThe anti-lock braking system (ABS) is operating normally in standby mode
• DThe brake fluid reservoir is overfilled beyond the maximum level mark

Under Moldovan technical regulations, what is the maximum permissible play (jocul liber) of a motorcycle's steering handlebar mechanism?

• AThe steering head bearings must have zero free play, turning smoothly without binding, no…
• BUp to 25 mm of forward and backward play at the handlebar grips
• CUp to 15 degrees of free rotational movement before the front fork responds
• DSteering play is unregulated on single-track two-wheelers

Why must rear-view mirrors on a motorcycle be convex rather than flat glass?

• ATo provide a wider field of view, helping compensate for significant blind spots behind t…
• BTo make following vehicles appear closer than they really are for safety
• CTo focus sunlight onto the rider's hands in cold weather
• DTo withstand vibrations without shattering on bumpy roads

What is the primary function of high-visibility (fluorescent and retro-reflective) clothing for motorcyclists?

• AIt significantly increases contrast against background road environments, making the ride…
• BIt deflects radar and laser beams emitted by police speed monitoring devices
• CIt protects the rider from electrical shock in the event of an alternator short-circuit
• DIt is legally required to replace the motorcycle's rear taillight

When should a motorcycle helmet be replaced?

• AAfter a significant impact, when damage or poor fit makes it unsafe, or at the interval s…
• BOnly after an impact that leaves a visible crack in the outer shell
• CAt one universal interval that applies to every helmet model and material
• DOnly when the chin-strap buckle stops closing

What is the primary function of the side-stand interlock switch on modern motorcycles?

• AIt cuts the engine if the rider attempts to put the transmission into gear while the side…
• BIt locks the front wheel when parked on an incline
• CIt activates the hazard warning lights when the motorcycle is parked
• DIt prevents the fuel tank cap from being opened while the bike is running

What is the legal requirement in Moldova regarding exhaust noise and silencers (tobe de eșapament) on motorcycles?

• AThe exhaust system must be equipped with an effective silencer; operating with missing, g…
• BMotorcycles are exempt from noise limits between 22:00 and 06:00
• CExhaust baffles may be removed freely to increase engine horsepower
• DAny motorcycle exhaust is legal provided the tailpipe is angled downward

What is the primary danger associated with carrying loose items or grocery bags hanging from a motorcycle's handlebars?

• AThey can interfere with steering lock, catch in the front wheel spokes, or snag the front…
• BThey reduce engine cooling airflow by more than 50%
• CThey increase headlight power consumption due to shadow formation
• DThey interfere with the electronic fuel injection oxygen sensor

When inspecting motorcycle sprockets, what visual sign indicates that the sprockets and chain must be replaced immediately?

• AThe sprocket teeth are hooked, pointed, or visibly worn asymmetrical on one face ('shark-…
• BThe teeth have a shiny metallic finish where the rollers make contact
• CThe sprocket is covered in dark chain lubricant
• DThe rear sprocket has fewer teeth than the front countershaft sprocket

What is the purpose of checking the throttle free play during a pre-trip motorcycle inspection?

• ATo ensure there is a small amount of play (2–5 mm) so turning the handlebars does not ina…
• BTo verify that the throttle takes at least three full turns to reach full throttle
• CTo ensure the throttle grip remains locked in place when released for highway cruising
• DTo adjust the air-fuel mixture ratio mechanically

What is the function of the clutch lever located on the left handlebar of a conventional motorcycle?

• AIt disengages the engine from the transmission, allowing smooth gear shifts and temporary…
• BIt operates the rear wheel hydraulic friction brake
• CIt controls the front suspension compression damping rate
• DIt activates the electric starter motor when squeezed

Which brake control operates the front wheel brake on a standard motorcycle?

• AThe hand lever located on the right side of the handlebar
• BThe foot pedal located on the right side of the motorcycle
• CThe hand lever located on the left side of the handlebar
• DThe foot pedal located on the left side of the motorcycle