Under UL 687, a safe rated 'TL-15' is certified to resist attack with common hand and power tools for how long?
Safe Types Ratings
Question · Easy
A UL 72 Class 350 fire rating means interior temperature will not exceed which temperature during the fire test?
The 'RSC' designation in a UL 687 RSC-rated safe stands for:
A 'B-rate' safe typically refers to which construction standard?
What does the 'X6' in TL-30X6 signify?
Question · Medium
Which UL label certifies resistance to torch, tool, AND explosive attack?
The UL Impact Test for fire-resistive safes primarily verifies the safe's ability to:
Class 125 fire-rated media safes are designed to protect:
A composite safe body commonly contains which material between inner and outer steel walls for drill resistance?
Which material is MOST commonly used in fire-resistive safe lining for its moisture content?
Fire Ratings Lining
A safe labeled 'Class 350-2 hour' protects paper contents for how long at what maximum interior temperature?
When comparing interior and exterior dimensions of a fire safe to a burglary safe of the same external size, the fire safe generally has:
The Sargent & Greenleaf 6730 is classified under UL 768 as which group?
Mechanical Locks
In a standard 3-wheel mechanical combination lock, the wheel closest to the dial (farthest from the back plate) is the:
The slot in a combination wheel that the fence drops into is called the:
UL 768 Group 1 mechanical combination locks must resist expert manipulation for at least:
The part that extends from the drive cam and enters the wheel pack gates when aligned is the:
The Kaba Mas X-09 is classified as which UL type, approved for what application?
Certifications Training
In Sargent & Greenleaf combination nomenclature, 'T.O.' typically stands for:
A LaGard 3330 is what style of lock?
The dialing sequence '4L-3R-2L-stop' in a standard 3-wheel lock means:
Combination Changes
To change a combination on most S&G mechanical locks, the technician must:
The single most important rule after changing a mechanical combination is:
The 'forbidden zone' on a standard S&G mechanical lock typically occurs between which dial numbers, where combinations should not be set?
A 'relock trigger' in a mechanical safe lock is activated when:
Safe Opening Troubleshooting
A glass relocker is triggered by:
A boresco (borescope) is used by safe technicians primarily to:
A punch-resistant hardplate is typically made of:
LaGard Basic, Comfort, and Standard are all examples of:
Electronic Locks
The S&G 2006 (now Titan / D-Drive family) is what class of lock?
Time delay on an electronic safe lock is designed to:
Dual custody (dual control) mode in an electronic safe lock requires:
The audit trail on an advanced electronic safe lock typically records:
A duress code on an electronic safe lock:
UL 2058 Type 1 vs Type 2 electronic safe locks differ primarily by:
When a battery dies in a typical electronic safe lock with the safe CLOSED, what normally happens?
Penalty lockout on a typical electronic safe lock activates after:
In LaGard and S&G electronic lock hierarchies, the code ending in the master/admin position can typically:
The Kaba Mas LP (Low Profile) series locks are commonly installed on:
When a technician installs a new electronic safe lock, the very first action after mounting should be:
Safe manipulation is MOST typically performed on which group of mechanical locks?
Manipulation Intro
In manipulation, the 'contact points' refer to:
A manipulation graph (graphing method) plots:
Question · Hard
A 'pickup' in combination lock theory refers to:
The S&G 6730 has a documented weak spot historically related to:
External troubleshooting of a safe with a reported 'won't open with correct combination' should FIRST involve:
When drilling a safe for lockout, technician best practice dictates the smallest hole that allows:
A safe deposit box typically uses which access system?
Safe Deposit Boxes
Loading more…